ZKSoftware TF1600 manual

ZKSoftware TF1600

On this page you find the ZKSoftware TF1600 manual. Please read the instructions in this operator manual carefully before using the product. If you have any questions about your that are not answered in the manual, please share your question in the troubleshooting section on the buttom of this page.

Brand
ZKSoftware
Model
TF1600
Product
EAN
Language
English
Filetype
PDF
4. Other Connections
1) Share power with the lock:
2) Does not share power with the lock:
Device does not share power with the lock:
①:‘I’: device output current, ‘ULOCK’: lock voltage,‘ILOCK’: lock current.
Device share power with the lock:
ULOCK=12V, I-ILOCK>1A…… And the distance between the lock and the device is 10 meters.①;
A. ULOCK=12V, I-ILOCK1A; B. ULOCK12V; C. The distance between the lock and the device is >10 meters.
3.Lock Connection
(1) The system supports NO lock and NC lock. For example the NO lock (normally open at power on) is connected with "NO"
(2) When the electrical lock is connected to the Access Control System, you need to connect one FR107 diode (shipped in package) in
and "COM" terminals, and the NC lock is connected with "NC" and "COM" terminals.
parallel with the connection to prevent self-inductance EMF feedback the system.
NB: Do not reverse the polarities!
NC LOCK
+
-
NO LOCK
-
FR 107
-
+
DC12V
+
-
-
+
DC power
-
+
DC12V
-
+
DC power
+
-
FR 107
+
GND
NO1
NO2
COM2
BELL+
BUT
COM1
SEN
NC1
BELL-
Purple
Brown
White
Red
Black
Yellow
Gray
Orange
Blue
Green
GND
+12V
Red
Black
GND
NO1
NO2
COM2
BELL+
BUT
COM1
SEN
NC1
BELL-
Purple
Brown
White
Red
Black
Yellow
Gray
Orange
Blue
Green
GND
+12V
Red
Black
NC LOCK
-
+
DC12V
+
-
+
-
FR 107
NO LOCK
-
+
DC12V
+
-
+
-
FR 107
GND
NO1
NO2
COM2
BELL+
BUT
COM1
SEN
NC1
BELL-
Purple
Brown
White
Red
Black
Yellow
Gray
Orange
Blue
Green
GND
+12V
Red
Black
GND
NO1
NO2
COM2
BELL+
BUT
COM1
SEN
NC1
BELL-
Purple
Brown
White
Red
Black
Yellow
Gray
Orange
Blue
Green
GND
+12V
Red
Black
2.Structure and Function
Access Control System Function
(1) If a registered user verified, the device will send a signal to unlock the door.
(3) If the device is illegally removed, the device will signal the alarm.
(4) External card reader is supported.
(5) External exit button is supported.
(2) The door sensor will detect the ON-OFF state. If the door is unexpectedly
opened or improperly closed, the alarm signal (digital value) will be triggered.
(6) Supports RS485, TCP/IP communication to be able to connect with a PC. One
PC can manage multiple devices.
RS485
TCP/IP
Lock
Sensor
Alarm
RS485 Converter
Exit Switch
External Reader
Exit
Version: 1.1 Date: May, 2013
Installation Guide
1.Equipment Installation
Wiri ng Hole
Instr uctio n for the M ounti ng Pape r
Befor e the dev ice is fa stene d, plea se
stick t he pape r to the pl ace whe re you
want to i nstal l it, the n make ho les and
lay cab les acc ordin g to the mo untin g
paper.
Mount ing Pap er
(on ly for yo ur refe rence )
Fixi ng Hole
Fixi ng Hole
Fixi ng Hole
10
11
12
13
the wall. Drill the holes according
(1) Paste the mounting template on
to the marks on the template
(holes for screws and wiring).
(2) Remove the screws on the
bottom of device.
2. Structure and Function
(5) Place the unit onto the mounting bracket, and
tighten the screws at the bottom of the unit.
plate on the wall according to
(4) Fix the rubber pad and the back
the mounting paper.
(3) Take away the back plate.
D. We suggest user does not share power with the lock.
Registering user information and fingerprint, we must use the ACCESS3.5
Software and fingerprint USB sensor, then upload .
Note:
* Reserves the final rights of modification and interpretation by our company.
Alarm Power
Exit Button
Door Sensor
-
+
Alarm
Alarm Voltage output DC 12V
GND
NO1
NO2
COM2
BUT
COM1
SEN
NC1
White
Red
Black
Yellow
Gray
Orange
Blue
Green
Exit
WARNING: Do Not operate with Power connected.
5. Power Connection
5. Power Connection:
The device working voltage DC 12V, electric current 500mA
Positive is connected with‘+12V’;
negative is connect with ’GND’ (do not reverse the polarities).
+
DC12V
-
GND
+12V
Red
Black
(50mA for standby current).

Do you have a question about the ZKSoftware TF1600?

If you have a question about the "ZKSoftware TF1600", don't hesitate to ask. Make sure to describe your problem clearly, this way other users are able to provide you with the correct answer.

Buy related products:

Product specifications

Technical details
International Protection (IP) code   IP65
Other features
Dimensions (WxDxH)   62.5 x 41.5 x 185 mm
Colour
Product colour   Black
Operational conditions
Operating temperature (T-T)   -40 - 45
Operating relative humidity (H-H) 20 - 80