Yamaha VXS10ST

Yamaha VXS10ST manual

(1)
  • PLEASE READ CAREFULLY BEFORE PROCEEDING
    * Please keep this manual in a safe place for future reference.
    WARNING
    Always follow the basic precautions listed below to avoid the possibility of
    serious injury or even death from electrical shock, short-circuiting, damages,
    fire or other hazards. These precautions include, but are not limited to, the
    following:
    This device contains no user-serviceable parts. Do not open the device or attempt
    to disassemble the internal parts or modify them in any way. If it should appear to
    be malfunctioning, discontinue use immediately and have it inspected by qualified
    Yamaha service personnel.
    Do not expose the device to rain, use it near water or in damp or wet conditions, or
    place on it any containers (such as vases, bottles or glasses) containing liquids
    which might spill into any openings. If any liquid such as water seeps into the
    device, have the device inspected by qualified Yamaha service personnel.
    CAUTION
    Always follow the basic precautions listed below to avoid the possibility of
    physical injury to you or others, or damage to the device or other property.
    These precautions include, but are not limited to, the following:
    Do not place the device in an unstable position where it might accidentally fall over.
    Do not place the device in a location where it may come into contact with corrosive
    gases or salt air. Doing so may result in malfunction.
    Construction work should be carried out in accordance with construction-related
    law and always by a professional constructor. If the device installation requires
    construction work, make sure to observe the following precautions.
    - Choose mounting hardware and an installation location that can support the
    weight of the device.
    - Avoid locations that are exposed to constant vibration.
    - Use the required tools to install the device.
    - Inspect the device periodically.
    When transporting or moving the device, always use two or more people.
    Attempting to lift the device by yourself may damage your back, result in other
    injury, or cause damage to the device itself.
    Before connecting the device to a power amplifier, turn off the power for all devices.
    Before turning the power on or off for all devices, set all volume levels to minimum.
    Use only speaker cables for connecting speakers to the speaker connectors. Use of
    other types of cables may result in fire.
    Do not wipe the outer packaging with benzine, thinner, or synthetic detergent and
    do not use electrical contact cleaner. These may damage the outer packaging and
    dissolve the parts.
    Avoid inserting or dropping foreign objects (paper, plastic, metal, etc.) into holes of
    the grille. If this happens, have the device inspected by qualified Yamaha service
    personnel.
    Do not operate the device if the sound is distorting. Prolonged use in this condition
    could cause overheating and result in fire.
    When choosing a power amplifier for use with this device, make sure that the output
    power of the amplifier is lower than the power capacity of this device (see
    SPECIFICATIONS).
    Even if the output power of the amplifier is lower than the power capacity of this
    device (PGM), use of excessive input signals resulting in clipping may cause
    damage to the device.
    Malfunction or fire may occur especially when the following sounds or noises are
    generated:
    - feedback, when using a microphone
    - continuous and extreme volume sound from a musical instrument
    - extreme continuous distorted sound
    - noise caused by plugging/unplugging the cable while the amplifier is turned on
    PRECAUTIONS
    Do not open
    Water warning
    Location
    Connections
    Maintenance
    Handling caution
    NOTICE
    To avoid the possibility of malfunction/damage to the product or damage to other
    property, follow the notices below.
    ƔHandling and Maintenance
    Do not place vinyl, plastic or rubber objects on the device, since this might discolor
    the cabinet.
    When cleaning the device, use a dry and soft cloth. Do not use paint thinners,
    solvents, cleaning fluids, or chemical-impregnated wiping cloths.
    Condensation can occur in the device due to rapid, drastic changes in ambient
    temperature-when the device is moved from one location to another, or air
    conditioning is turned on or off, for example. Using the device while condensation is
    present can cause damage. If there is reason to believe that condensation might
    have occurred, leave the device for several hours until the condensation has
    completely dried out.
    Be sure to observe the amplifier’s rated load impedance (see SPECIFICATIONS),
    particularly when connecting speakers in parallel. Connecting an impedance load
    outside the amplifier’s rated range can damage the amplifier.
    When connecting the speakers with high impedance, be sure that the output total of
    each speaker does not exceed the rated output of the power amplifier.
    ABOUT THE PROTECTION CIRCUIT
    This speaker system has an internal protection circuit that shuts off the speaker unit
    when an excessive input signal is applied.
    If the speaker unit emits no sound, reduce the volume level of the amplifier
    immediately.
    The sound will return automatically in several seconds.
    Place the speaker on a flat and smooth surface.
    ƔAbout This Manual
    The illustrations as shown in this manual are for instructional purposes only, and may
    appear somewhat different from those on your device.
    Yamaha cannot be held responsible for damage caused by improper use or
    modifications to the device.
    Information for Users on Collection and Disposal of Old Equipment
    This symbol on the products, packaging, and/or accompanying
    documents means that used electrical and electronic products
    should not be mixed with general household waste.
    For proper treatment, recovery and recycling of old products, please
    take them to applicable collection points, in accordance with your
    national legislation and the Directives 2002/96/EC.
    By disposing of these products correctly, you will help to save
    valuable resources and prevent any potential negative effects on
    human health and the environment which could otherwise arise from inappropriate
    waste handling.
    For more information about collection and recycling of old products, please contact
    your local municipality, your waste disposal service or the point of sale where you
    purchased the items.
    [For business users in the European Union]
    If you wish to discard electrical and electronic equipment, please contact your dealer
    or supplier for further information.
    [Information on Disposal in other Countries outside the European Union]
    This symbol is only valid in the European Union. If you wish to discard these items,
    please contact your local authorities or dealer and ask for the correct method of
    disposal.
    Owner’s Manual
    Surface Mount Speaker
    English
    ZG14070
    EN
Yamaha VXS10ST

Need help?

Number of questions: 0

Do you have a question about the Yamaha VXS10ST or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Yamaha VXS10ST owners to properly answer your question.

View the manual for the Yamaha VXS10ST here, for free. This manual comes under the category Speakers and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Yamaha VXS10ST or do you need help? Ask your question here

Yamaha VXS10ST specifications

Brand Yamaha
Model VXS10ST
Product Speaker
EAN 4957812531252, 0086792974071
Language English
Filetype PDF
Features
Bass reflex
Product colour Black
Material MDF
Subwoofer
Subwoofer frequency range 45 - 250
Subwoofer driver diameter 254mm
Subwoofer driver diameter (imperial) 10 2011-05-04 11:27:54 2012-06-08 13:40:02 12 28 1 RPM 0000-00-00 00:00:00 2012-06-08 13:40:02 14 30 1 M 0000-00-00 00:00:00 2012-06-08 13:40:02 15 31 1 kHz 0000-00-00 00:00:00 2012-06-08 13:40:02 16 32 1 ° 0000-00-00 00:00:00 2012-06-08 13:40:02 17 33 1 x
Impedance 8
Subwoofer sensitivity 96
Subwoofer type Active subwoofer
Subwoofer RMS power 200
Weight & dimensions
Subwoofer width 260mm
Subwoofer depth 389mm
Subwoofer height 500mm
Subwoofer weight 19500
Power
Power source type AC

Related product manuals

Speaker Yamaha

Frequently Asked Questions

Below, you will find the most frequently asked questions about the Yamaha VXS10ST.

Is your question not listed? Ask your question here

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

Read more