Yamaha PDX-11 manual

Yamaha PDX-11

On this page you find the Yamaha PDX-11 manual. Please read the instructions in this operator manual carefully before using the product. If you have any questions about your that are not answered in the manual, please share your question in the troubleshooting section on the buttom of this page.

Brand
Yamaha
Model
PDX-11
Product
EAN
, 27108940199
Language
English, Spanish
Filetype
PDF
Website
http://www.yamaha.com/
(
" Playing Audio")
Weight : 1.5 kg (3.3 lbs)
Printed in China ZA31290
Portable Player Dock
PDX-11
Owner's manual
Status Indicators (LED)
Indicate the status of PDX-11 and the connected iPhone/iPod.
Green status indicator:
PDX-11 is turned on and operating normally.
Red status indicator:
An error has occurred or the volume has reached its maximum or minimum level.
The status of external device (connected through AUX) is not indicated.
Multi-Source Mix
When an iPhone/iPod and another external device are connected
to PDX-11, audio can be enjoyed in many ways—for example, by
playing music while listening to the news.
Integrated Volume Control
You can control the PDX-11's volume level by operating the volume
control function on the iPhone/iPod.
Charge Your iPhone/iPod Battery
Battery Operation
You can enjoy listening to music anytime, anywhere.
Features
Supplied Accessories
Please con rm that the following accessories are included before using
the unit.
• Remote control • AC adaptor
Turning on the Power
Push the (Power).
When the power is on, the green status indicator will light up.
When PDX-11 is left in the powered-on state without connecting to
the iPhone/iPod and external device's connector cable, it will turn off
in 30 minutes.
Connect the iPhone/iPod to the iPod dock.
The battery of the connected iPhone/iPod will be
charged.
Playing AudioConnecting Music Devices
• The iPhone/iPod battery cannot be charged when PDX-
11 is being operated by batteries.
• Be sure to use a dock adaptor included your iPhone/
iPod or applicable commercially available dock
adaptor. If you do not use an adaptor or the adaptor is
not compatible, the connection may be loose or poor,
causing damage to the connector. For more information
about the dock adaptor, refer to Apple's website.
• If the iPhone/iPod is forcibly connected while still in a protective case,
the connector may be damaged. Make sure to remove any protective
iPhone/iPod case before connecting.
• When the unit is used with the iPhone/iPod’s shake shuf e function on,
the iPhone/iPod might shuf e due to the vibration of speaker depending
on the music played back. If this happens, turn the shake shuf e function
off. (Refer to the instruction manual of the iPhone/iPod to turn the
function off.)
Always disconnect iPhone/iPod from PDX-11, before carrying it by its
handle.
• If the iPhone/iPod is connected while playing videos or music on the
iPhone/iPod, PDX-11 will turn on automatically and continue the play
(except when PDX-11 is in power-saving mode).
You can always connect and disconnect the iPhone/iPod.
• The PDX-11’s volume level can be adjusted using the iPhone/iPod. The
volume level will also be displayed on the iPhone/ iPod.
• PDX-11 turns off automatically, when the iPhone/iPod and external
device's connector cable are disconnected.
Status indicator
(Green)
Status indicator
(Red)
Volume −
Power on/off
Volume +
If you start playback on the connected device, sound will come
from the PDX-11's speakers.
iPhone/iPod's playback can be controlled using either the included
remote control or the iPhone/iPod itself.
MENU
Select menu
Show iPhone/iPod's
menu
Skip
Backward/Forward
Select folder
Volume control
Play/Pause
Power on/off
Remove the insulation
sheet before using.
Connect the included AC adaptor.
Connect the AC adaptor to
PDX-11, before connecting
the power cable to the wall
outlet.
When using PDX-11 with
batteries, disconnect the AC
adaptor from the rear panel.
Operate by the
Remote Control
When Operating PDX-11 Using Batteries
Replacing the Battery
Pull out the battery case as
shown in the diagram below
and change a battery.
Back
While pushing the release tab in
direction
, slide out the battery
holder in direction
.
(20 feet)
Within 6 m
To remove the battery cover, push the tab
while lifting the cover upward.
Follow the + and – markings on PDX-11
when inserting the batteries.
Replace the battery cover.
Use 6 commercially available AA batteries.
LED
Status
Green Red
The PDX-11's power is ON. The iPhone/iPod is connected correctly.
* If PDX-11 is not operated for 30 seconds, the green status
indicator is dimmed.
Connection with iPhone/iPod is in progress, please wait.
An operation has been performed using the PDX-11's controls, the
remote control, or the iPhone/iPod itself.
Refer to the "TROUBLESHOOTING".
The volume is at the maximum or minimum level.
Blinks once
Blinks once
During battery-powered operation, if PDX-11 is left in the powered-off state
without being operated for 30 minutes, power-saving mode will be activated and
remote control will not work.
Push the on the control panel of PDX-11 to cancel the power-saving mode.
Connecting an External Device
Connect to the AUX on the rear panel.
To connect an external device
to PDX-11, use a commercially
available 3.5 mm (1/8 in.)
stereo mini plug cable.
AUX
Dock adaptor
iPod dock
CR2025 button
cell battery.
Before Use
…Green indicator lit
…Red indicator blinking
…Green indicator blinking
…Indicator not lit
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
To assure the finest performance, please read this manual carefully. Keep it in a safe
place for future reference.
1 Install this unit in a well ventilated, cool, dry, clean place - away from direct
sunlight, heat sources, vibration, dust, moisture, and/or cold. (Do not use/keep this
unit in a car etc.)
2 Locate this unit away from other electrical appliances, motors, or transformers to
avoid humming sounds.
3 Do not expose this unit to sudden temperature changes from cold to hot, and do not
locate this unit in an environment with high humidity (i.e. a room with a
humidifier) to prevent condensation inside this unit, which may cause an electrical
shock, fire, damage to this unit, and/or personal injury.
4 Avoid installing this unit where foreign objects may fall onto this unit and/or this
unit may be exposed to liquid dripping or splashing. On the top of this unit, do
NOT place:
Other components, as they may cause damage and/or discoloration on the
surface of this unit.
Burning objects (i.e. candles), as they may cause fire, damage to this unit,
and/or personal injury.
Containers with liquid in them, as they may fall and liquid may cause electrical
shock to the user and/or damage to this unit.
5 Do not cover this unit with a newspaper, tablecloth, curtain, etc. in order not to
obstruct heat radiation. If the temperature inside this unit rises, it may cause fire,
damage to this unit, and/or personal injury.
6 Do not operate this unit upside-down. They may overheat, possibly causing
damage.
7 Do not use force on switches, knobs, and/or cords.
8 When disconnecting the power cable from the wall outlet, grasp the AC plug; do
not pull the cord.
9 Do not clean this unit with chemical solvents; this might damage the finish. Use a
clean, dry cloth.
10 Only the voltage specified on this unit must be used. Using this unit with a higher
voltage than specified is dangerous and may cause fire, damage to this unit, and/or
personal injury. Yamaha will not be held responsible for any damage resulting
from use of this unit with a voltage other than that specified.
11 Do not attempt to modify or fix this unit. Contact qualified Yamaha service
personnel when any service is needed. The cabinet should never be opened for any
reason.
12 When not planning to use this unit for long periods of time (i.e. when going on
vacation), disconnect the power cable from the AC wall outlet.
13 Be sure to read the “TROUBLESHOOTING” section regarding common operating
errors before concluding that the unit is faulty.
14 Before moving this unit, disconnect the power cable from the wall outlet.
15 Be sure to use the AC adaptor supplied with this unit. Using an AC adaptor other
than the one provided may cause fire or damage to this unit.
16 Install this unit near the wall outlet and where the power cable can be reached
easily.
17 For added protection for this product during a lightning storm, or when it is left
unattended and unused for long periods of time, unplug it from the wall outlet.
This will prevent damage to the product due to lightning and power-line surges.
18 The batteries shall not be exposed to excessive heat such as sunshine, fire or the
like.
Keep the batteries in a location out of reach of children. Batteries can be
dangerous if a child were to put in his or her mouth.
If the batteries grow old, the effective operation range of the remote control
decreases considerably. If this happens, replace the batteries as soon as
possible.
Do not use old batteries together with new ones.
Do not use different types of batteries (such as alkaline and manganese
batteries) together. Read the packaging carefully as these different types of
batteries may have the same shape and color.
Exhausted batteries may leak. If the batteries have leaked, dispose of them
immediately. Avoid touching the leaked material or letting it come into contact
with clothing, etc. Clean the battery compartment thoroughly before installing
new batteries.
If you plan not to use the unit for a long period of time, remove the batteries
from the unit. Otherwise, the batteries will wear out, possibly resulting in a
leakage of battery liquid that may damage the unit.
Do not throw away batteries with general house waste. Dispose of them
correctly in accordance with your local regulations.
There is a chance that placing this unit too close to a CRT-based (Braun tube) TV set might
impair picture color. Should this happen, move this unit away from the TV set.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT
TO RAIN OR MOISTURE.
Even if an iPhone or iPod is not connected to this unit, this unit is not disconnected from the
AC power source as long as it is connected to the wall outlet. In this state, this unit is designed
to consume a very small quantity of power.
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
For U.K. customers
If the socket outlets in the home are not suitable for the plug supplied with this appliance, it should
be cut off and an appropriate 3 pin plug fitted. For details, refer to the instructions described below.
Note
The plug severed from the mains lead must be destroyed, as a plug with bared flexible cord is
hazardous if engaged in a live socket outlet.
Information for Users on Collection and Disposal of Old Equipment and
used Batteries
These symbols specified in the Directives 2002/96/EC and 2006/66/EC indicate
that used electrical and electronic products and batteries should not be mixed with
general household waste.
For proper treatment to avoid harmful effect on human health and environment,
please contact your local municipality, your waste disposal service or the point of sale
where you purchased the items.
Note for the battery symbol (bottom two symbol examples):
This symbol might be used in combination with a chemical symbol. In this case it
complies with the requirement set by the Directive for the chemical involved.
SPECIAL INSTRUCTIONS FOR U.K. MODEL
IMPORTANT
THE WIRES IN MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE
FOLLOWING CODE:
Blue: NEUTRAL
Brown: LIVE
As the colours of the wires in the mains lead of this apparatus may not correspond with
the coloured markings identifying the terminals in your plug, proceed as follows:
The wire which is coloured BLUE must be connected to the terminal which is marked with
the letter N or coloured BLACK. The wire which is coloured BROWN must be connected to
the terminal which is marked with the letter L or coloured RED.
Making sure that neither core is connected to the earth terminal of the three pin plug.
Important Notice: Guarantee Information for customers in EEA* and Switzerland
For detailed guarantee information about this Yamaha product, and Pan-EEA* and Switzerland warranty service, please either visit the website address below (Printable file is available at our
website) or contact the Yamaha representative office for your country. * EEA: European Economic Area
(http://europe.yamaha.com/warranty/)
AVEEA71102A
Situation Remedies and Points to Confi rm
No sound
Is the iPhone/iPod connected securely to the iPod dock?
Are PDX-11 and the external device’s connector cable connected securely? Are
the connector cable and the external device connected securely?
Is the AC adaptor connected securely?
Push the
to turn on PDX-11.
Is the volume turned down?
Have the batteries in PDX-11 been exhausted?
Even if the volume level is raised, the sound level does not
increase.
It is possible that the protection circuitry has been activated by excessive volume.
Reduce the volume level.
Even if the volume level of the connected iPhone/iPod is
changed, the sound level does not change.
Is the connected iPhone/iPod compatible with PDX-11?
(
"SPECIFICATIONS")
Is the iPhone/iPod connected securely to the iPod dock?
The iPhone/iPod cannot be controlled using the remote control.
PDX-11 cannot be controlled using the remote control.
If PDX-11 is being operated by batteries, it is possible that power-saving mode
has been activated. (
"Before Use")
Are you outside of the remote control operating
range?
Has the remote control’s battery been exhausted,
or is it inserted incorrectly?
Has the insulation sheet been removed?
When PDX-11 is used outdoors, the remote control’s operating
range becomes smaller.
The remote control’s operating range changes depending on the operating
environment (amount of lighting, sunlight, etc.).
The green status indicator is lit, and the red status indicator
blinks for 2 seconds only.
Is the connected iPhone/iPod compatible with PDX-11?
Use a supported iPhone/iPod. (
"SPECIFICATIONS")
The green status indicator is lit, and the red status indicator is
blinking quickly.
Is the iPhone/iPod connected securely to the iPod dock?
Restart the iPhone/iPod.
Update the iPhone/iPod rmware to the latest version.
The green status indicator is lit, and the red status indicator is
blinking slowly.
Have the batteries in PDX-11 been exhausted?
PDX-11 does not operate at all.
In some cases, resetting PDX-11 can solve the problem.
To reset PDX-11, push and hold the
on the control panel for 10 seconds or more.
TROUBLESHOOTING
SPECIFICATIONS
Supported iPod .............................iPod touch (1st, 2nd, 3rd and 4th generations), iPod classic, iPod with video,
iPod nano (1st, 2nd, 3rd, 4th, 5th and 6th generations)
Supported iPhone ............................................................................... iPhone 4, iPhone 3GS, iPhone 3G, iPhone
AUX
Input connector ............................................................................... ø 3.5 mm (1/8 in.) stereo mini jack
Power supply
U.S.A. and Canada models ......................................................................................... AC 120 V, 60 Hz
Other models ............................................................................................... AC 100 to 240 V, 50/60 Hz
Power consumption ......................................................................................................................................... 8 W
Power consumption when power off and the iPhone/iPod is disconnected ......................................0.5 W or less
AC Adaptor ........................................................ MU18-D120150-B2 or MU18-D120150-C5 (DC 12 V, 1.5 A)
Battery supply ....................................................................................................................... LR6, AA, UM-3 × 6
8 hours of power at 0.18 W output (Alkaline Battery)
* To play an unsupported iPod, such as a 4th generation (or earlier) iPod, iPod shuf e, iPod photo, and iPod
mini, connect the iPod to AUX and use it as an external device.
* Speci cations are subject to change without notice.
* The name plate is located on the bottom of the unit.
"Made for iPod" and "Made for iPhone"
mean that an electronic accessory has been
designed to connect specifi cally to iPod or
iPhone, respectively, and has been certifi ed
by the developer to meet Apple performance
standards.
Apple is not responsible for the operation of
this device or its compliance with safety and
regulatory standards. Please note that the
use of this accessory with iPod or iPhone
may affect wireless performance.
iPhone, iPod, iPod classic, iPod nano,
iPod touch and iTunes are trademarks of
Apple Inc., registered in the U.S. and other
countries.
Refer to the table below if the unit does not operate properly. If the problem you are experiencing is not listed below, or if the instruction below does not help, turn off the unit,
disconnect the power cable, and contact the nearest authorized Yamaha dealer or service center.
English
Control Panel
210 mm
(8-1/4 in.)
237 mm
(9-3/8 in.)
237 mm
(9-3/8 in.)
Dimensions
12V
---

Do you have a question about the Yamaha PDX-11?

If you have a question about the "Yamaha PDX-11", don't hesitate to ask. Make sure to describe your problem clearly, this way other users are able to provide you with the correct answer.

Buy related products:

Product specifications

Audio
Audio output channels   1.0
RMS rated power   -
Frequency range   -
Ports & interfaces
Headphone connectivity   3.5 mm
Bluetooth   no
Headphone outputs   1
Radio
FM radio   no
Power
Power source type   AC, Battery
Battery technology   Alkaline
Number of batteries supported   6
Battery type   AA
Battery life (max)   8
Built-in charger   -
Other features
Dimensions (WxDxH)   237 x 211 x 240 mm
Weight & dimensions
Weight   1500
Packaging content
Handheld remote control   yes
Design
Product colour   White
RoHS compliance   -
Woofer diameter 100 mm
Tweeter diameter 35 mm
Performance
Apple docking compatibility   iPhone, iPod
Equalizer   no

Related products: