- Half or full-duplex; maintains 200Mbit/s link bandwidth
- Patch or crossover cables
Dimensions105 x 40 x 22 mm ( 4.13 x 1.57 x 0.87” ) LxWxH
Weight 70g ( 2.5 oz )
EnvironmentalOperating temperature: -10 to 50
C ( 14 to 122
Humidity: up to 85%, non-condensing
LED indicators – both connectors
Network statusPoE Status
OnLinkOnPoE power enabled
FlashingActivityOffPoE not enabled
Note that the LEDs on OUTREACH MAX will not light until the PoE source
and powered device are both connected
If the powered device is disconnected, then the OUTREACH MAX should
also be disconnected from the PoE power source. OUTREACH MAX should
not be connected to equipment that is not PoE compatible.
Maximum extension distance
By installing an OUTREACH MAX for every extra 100 metres of cable, PoE
and Ethernet can be extended for considerable distances, with no
bandwith restrictions or any requirement for electrical power installation.
The maximum distance from the PoE source to the IP camera or other
device depends on how much PoE power the device requires:
Maximum range, for PoE power (watts)
PoE Plus switch
1.Non-PoE applications; using an OUTREACH LITE at the end of the chain
2.Not applicable; these power levels are for PoE Plus source and devices only
3.Extension is not possible at this power level with this power source
These figures are strict upper limits for installations using regular 24AWG
Cat 5e cable. Because actual power use and installed cable distances can
vary, using OUTSOURCE or OUTSOURCE PLUS is always recommended.
OUTSOURCE is an enhanced PoE injector and is fully compliant with the
IEEE 802.3af standard. OUTSOURCE PLUS is an enhanced PoE Plus injector
and is fully compliant with the IEEE 802.3at standard.
The distance limits for extension at other peak power levels can be checked
using the graph below:
OUTREACH MAX can be used with many implementations of PoE that are
not IEEE 802.3af or 802.3at compliant. This includes high-current PoE, or
PoE which is “always-on” or uses a proprietary signature.
Four-pair PoE, in which current is carried on both spare and data pairs to
double available power, is also supported. See application notes.
PLEASE READ CAREFULLY
7mm (0.28”) mounting holes
centres 89mm (3.5”) apart
PoE in from
or PoE switch
PoE out to
eg. IP camera
Number of questions: 0
Do you have a question about the Veracity Outreach Max XT or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Veracity Outreach Max XT owners to properly answer your question.
View the manual for the Veracity Outreach Max XT here, for free. This manual comes under the category Network cards/adapters and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Veracity Outreach Max XT or do you need help?