Vango Anteus 600SE

Vango Anteus 600SE manual

(1)
  • TENT PITCHING INSTRUCTIONS ANTEUS 600 (UK)
    FLYSHEET FIRST PITCHING
    Assemble poles and lay them on the ground
    Open out flysheet and position in required direction
    Locate pole sleeves on the flysheet and insert poles. The poles are colour coded to the pole sleeves.
    Locate one end of each pole at one side of the tent into the metal pin system attached to the groundsheet
    Make sure poles locate into correct pin system, all poles follow corresponding flysheet seams to pin system
    Push poles into an arch from opposite ends and locate pole ends into corresponding metal pin
    Tighten all the tensions straps at the base of the poles.
    Securely peg out the rear corners of the tent
    Ensure the tent is in a straight line
    Peg out the remaining poles and pegging points using pin pegs at the base of poles
    Attach all flysheet pole clips onto poles
    Peg out ALL guy lines using pin-pegs ensuring that guy line fabric attachment points are evenly tensioned.
    PRE-ATTACHED FRONT EXTENSION
    To erect the pre-attached canopy, insert the pole into the sleeve, connect to Ring and Pin system, tighten the tension straps and attach
    pole clips to pole.
    Pull canopy away from tent until roof of canopy is taut
    Peg out ALL guy lines using pin-pegs ensuring that guy line fabric attachment points are evenly tensioned.
    INNER ATTACHMENT
    Suspend the inner by attaching toggles of inner tent through rings on inside of flysheet
    Do the rear first and work forward
    It is advisable to remove the inner when taking down the tent when wet.
    TENSION BAND SYSTEM:
    Remove Tension Band System from pockets and attach into the corresponding clips at the apex of the pole
    Adjust the straps until they are taut
    DO NOT OVERTENSION. Excess tension will alter the shape of the tent
    Tension bands are designed to stabilise the tunnel structure of the tent
    The bands are not required to be used in calm weather
    RING & PIN SYSTEM
    Locate one end of pole onto the corresponding metal pin (figure 1)
    Peg the corners of the tent through the metal rings using pin-pegs (figure 2)
    Pegs should be positioned at a 45 degree angle to ensure maximum grip
    AUFBAUANLEITUNG ANTEUS 600 (DE)
    MIT AENZELTAUFBAU ZUERST
    Stecken Sie die Stangen zusammen und legen Sie sie auf den Boden
    Außenzelt auslegen und korrekt ausrichten.
    Fixieren Sie die Stangenhüllen am Überdach und setzen Sie die Stangen ein. Die Stangen und Stangenhüllen sind farblich gekennzeichnet.
    Befestigen Sie ein Ende jeder Stange auf einer Seite des Zelts in dem an der Bodenplane befestigte Metallstiftsystem.
    Achten Sie darauf, dass die Stangen in das korrekte Stift-System eingesteckt werden; alle Stangen verlaufen an den zugehörigen
    Außenzeltnähten entlang zum Stift-System.
    Schieben Sie die Stangen von den gegenüberliegenden Seiten in eine gewölbte Form und stecken Sie die Stangenenden in die zugehörigen
    Metallstifte ein.
    Alle Spanngurte unten an den Stangen fest anziehen.
    Stecken Sie die hinteren Ecken des Zelts fest aus.
    Achten Sie darauf, dass sich das Zelt in einer geraden Linie ausgerichtet befindet.
    Übrige Stangen und Verankerungspunkte mithilfe der Stiftheringe unten an den Stangen fixieren.
    Befestigen Sie alle Außenzelt-Halterungsklemmen an den Stangen.
Vango Anteus 600SE

Need help?

Number of questions: 0

Do you have a question about the Vango Anteus 600SE or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Vango Anteus 600SE owners to properly answer your question.

View the manual for the Vango Anteus 600SE here, for free. This manual comes under the category Tents and has been rated by 1 people with an average of a 5.9. This manual is available in the following languages: English, Dutch, German, French, Italian, Czech. Do you have a question about the Vango Anteus 600SE or do you need help? Ask your question here

Vango Anteus 600SE specifications

Brand Vango
Model Anteus 600SE
Product Tent
Language English, Dutch, German, French, Italian, Czech
Filetype PDF

Related product manuals

Tent Vango

ManualSearcher.com

Looking for a manual? ManualSearcher.com ensures that you will find the manual you are looking for in no time. Our database contains more than 1 million PDF manuals from more than 10,000 brands. Every day we add the latest manuals so that you will always find the product you are looking for. It's very simple: just type the brand name and the type of product in the search bar and you can instantly view the manual of your choice online for free.

ManualSearcher.com

© Copyright 2020 ManualSearcher.com. All Rights Reserved.

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

Read more