Online Broadcast Mixer with USB/Audio Interface and Midas Preamp
1 x XLR, balanced
1 x ⁄" TS, unbalanced
Phantom power+24 V, switchable via control app
Line In1 x ⁄" TRS, stereo
Line Out1 x ⁄" TRS, stereo
Headphone Out1 x ⁄" TRS, stereo
USB1 x USB 2.0, type B
Optical1 x Toslink
System / Processing
A/D – D/A conversion24-bit @ 48 kHz
EectsEQ, compression and gating
Frequency response10 Hz to 20 kHz, +0/-2 dB
Dynamic range> 110 dB
S/N ratio> 101 dB
Power Supply / Voltage
Power inputUSB Power, 5 V DC, 0.5 A (USB cable included)
Power consumption2.5 W
Dimensions / Weight
Dimensions (H x W x D)70 x 132 x 168 mm (2.8 x 5.2 x 6.6")
Weight0.68 kg (1.5 lbs)
(1) CHANNEL FADERS control individual channel levels in
(2) CHANNEL MUTE switches o the matching channel in
(3) !@#$* button lets you instantly censor and “bleep out”
(4) “COUGH” mutes your microphone while the button
(5) XLR MIC INPUT for audio input from professional
microphones. For condenser-style microphones that
require “phantom power”, go to the MIC tab in the GO XLR
app and activate the “Condenser” setting under MIC TYPE.
(6) LINE IN for audio input from devices such as phones,
tablets, computers, etc. The LINE IN connection can also be
used in a “2 PC” streaming setup to send chat alerts back
into GO XLR MINI.
(7) LINE OUT contains an exact copy of your broadcast
stream audio. This connection can be used to connect
to a dedicated streaming computer or other devices
(8) USB input for PC connection, rmware updates and
remote control with GO XLR app.
NOTE: GO XLR MINI is designed for use with USB 2.0
ports. USB 3.0/3.1 ports can cause audio dropouts and
(9) OPTICAL input for connection to SONY PlayStation
(10) MIC input for connection to headset microphones.
Typically, this headset connection will be a pink connector.
NOTE: If you intend to use the popular Blue Yeti*
microphone, which has its own built-in headphone
output, you should run that built-in headphone output
into the GO XLR MINI’s MIC input. For Blue Yeti mics
powered via USB, plug the USB connector directly into
your computer for power, but do not select the Blue Yeti as
an audio source on the computer. Instead, the Blue Yeti’s
headphone output will be the audio source for mixing
inside GO XLR MINI.
(11) PHONES output jack for your headphones. Typically,
the headphone connector will be a green connector.
*Yeti is a registered trademark of Blue Microphones.
†PlayStation is a registered trademark or trademark of Sony Interactive Entertainment Inc.
SONY is a registered trademark of Sony Corporation.
‡Xbox is either a registered trademark or trademark of Microsoft Corporation in the United
States and/or other countries.
Number of questions: 0
Do you have a question about the TC Helicon GO XLR Mini or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other TC Helicon GO XLR Mini owners to properly answer your question.
View the manual for the TC Helicon GO XLR Mini here, for free. This manual comes under the category Mixers and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the TC Helicon GO XLR Mini or do you need help?