ALARM CLOCK RADIO
WITH iPod DOCKING STATION
Follow the advice below for safe and appropriate operations.
. Do not use the unit in places which are extremely hot, cold, dusty, or humid.
. Place the unit on a flat and even surface.
. Do not restrict the airflow of the unit by placing it in a place with poor airflow, by covering it with a
cloth, or by placing it on a carpet.
. Do not place naked flame sources, such as lighted candles on the apparatus.
. Use the apparatus only in moderate climates (not in tropical climates).
. Do not expose the apparatus to dripping or splashing.
. Do not place objects filled with liquids, such as vases, on the apparatus.
. When connecting and disconnecting the AC power cord from the AC mains outlet, pull the plug and
not the cord itself. Pulling the cord may damage it and may be dangerous.
. The mains outlet and plug must always remain readily operable.
. When you are not going to use the unit for a long period of time, disconnect the AC power cord from
the AC mains outlet.
. Before use, check that the rated voltage of your unit matches your local voltage.
. When there is condensation inside the unit, it may not function normally.
. Let the unit stand for 1 to 2 hours before turning the power on, or gradually heat the room up and
dry the unit before use.
. Ensure a minimum distance of 5 cm around the apparatus for sufficient ventilation.
. Ensure that the ventilation is not impeded by covering the ventilation openings with items such as
newspapers, tablecloths, curtains, etc.
. Pay attention to the environmental aspects of battery disposal.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with an
arrowhead symbol within a
triangle is a warning sign
alerting the user to the
presence of “dangerous
voltage” inside the unit.
ATTENTION: To reduce the risk
of electric shock, do not remove
the cover. There are no user
serviceable parts inside the unit.
Refer all servicing to qualified
The exclamation mark
within a triangle is a
warning sign alerting the
user to the presence of
. In case of malfunction due to electrostatic discharge, the apparatus has to be reset by disconnecting
it from mains supply.