Roland DXY-1150A manual

Roland DXY-1150A

On this page you find the Roland DXY-1150A manual. Please read the instructions in this operator manual carefully before using the product. If you have any questions about your that are not answered in the manual, please share your question in the troubleshooting section on the buttom of this page.

Brand
Roland
Model
DXY-1150A
Product
Language
English
Filetype
PDF
42
Specification of DXY-1350A/1150A
The specifications of hardware
Feature
Max. plotting area
Media sizes
Number of pens
Acceptable paper types
Acceptable pen types
Paper holding method
Max. Plotting Speed
Mechanical resolution
Software resolution
Distance accuracy
Repetition accuracy
Interface
Buffer size
Instruction system
Control switches
LED
Power consumption
Acoustic noise level
External dimensions
Weight (Unit only)
Operating temperature
Operating humidity
Accessories
POSITION ( , , , ), FAST, P1, P2, ENTER,
VIEW, PEN UP/DOWN, PAPER HOLD, PEN1—8,
PEN SPEED, REPLOT MODE, REPLOT
POWER/ERROR, PAPER HOLD, VIEW
POSITION ( , , , ), FAST, P1, P2,
ENTER, VIEW, PEN UP/DOWN
POWER/ERROR, VIEW
DXY-1350A DXY-1150A
Flatbed Plotter
X axis: 432 mm (17"), Y axis: 297 mm (11-11/16")
(However, on the DXY-1150A no plotting can be done on the area under metal strips.)
ISO A3, A4, ANSI A, B
8
High quality paper, Tracing paper, Drafting film, Water based OHP film, Oil based OHP film
MPP pen, Refillable ink pen, 32 color plotter pens, Water based fiber tipped pen,
Thick water based fiber tipped pen, Standard ceramic pen, Oil based fiber tipped pen
Electrostatic Adsorption
Magnetic drawing board, metal strips and paper clip
600 mm/sec. (23-5/8") (FAST mode)
0.0125 mm (0.000492") /step (micro-step control)
RD-GL II, RD-GL I: 0.025 mm(0.000984") /step DXY-GL: 0.025 mm(0.000984") /step or 0.1 mm(0.00394") /step
Whichever the greater value of +/-0.1 mm(0.00394") or +/-0.3 % of moving distance (with drafting film)
0.1 mm (0.00394") or less (same pen / with drafting film)
Parallel (in complieance with the specification of Centronics), Serial (RS-232C specification)
1 Mbyte (384 Kbyte for replot buffer)
DXY-GL, RD-GL I, RD-GL II
Exclusive AC adapter DC +9.7 V 0.7 A, +31V 0.7 A
Standby mode: less than 27 dB (A) Drawing mode: less than 59 dB (A) (According to ISO 7779)
615 mm(24-1/4") (W) x 412 mm(16-1/4") (D) x 113 mm(4-1/2") (H)
5.7 kg ( 12.6 lb.)
5—40 C (41—104 F)
20%—80% (non-condensing)
Stand 2 (L and R), Exclusive AC adapter 1, Standard ceramic pen (for self-test) 1 set,
Paper (for self-test) 2, Transparent positioning sticker 1 set, Rubber positioning sticker 1 set,
Dust cover 1, User's manual 1, PLOTTER DRIVER for windows
®
95 and windows
®
3.1
*Metal strip (DXY-1150A only) 3, *Paper clip (DXY-1150A only) 1
Interface specifications
[Paralell]
Standard Incompliance with the specifications of Centronics
Input signal STROBE (1 BIT), DATA (8 BITS)
Output signal BUSY (1 BIT), ACK (1BIT)
I/O signal level TTL level
Transmission method Asynchronous
[Serial]
Standard RS-232C specifications
Transmission method Asynchronous, duplex data transmision
Transmission speed 1200, 2400, 4800, 9600
Parity check Odd, Even, None
Data bits 7 bits or 8 bits
Stop bits 1 bit or 2 bits

Do you have a question about the Roland DXY-1150A?

If you have a question about the "Roland DXY-1150A", don't hesitate to ask. Make sure to describe your problem clearly, this way other users are able to provide you with the correct answer.

Buy related products: