Pyle Surf Sound manual

Pyle Surf Sound

On this page you find the Pyle Surf Sound manual. Please read the instructions in this operator manual carefully before using the product. If you have any questions about your that are not answered in the manual, please share your question in the troubleshooting section on the buttom of this page.

Brand
Pyle
Model
Surf Sound
Product
EAN
68888745031, 68888745048, 78356828012
Language
English
Filetype
PDF
1. To turn on the product, hold for around 7 seconds, a signal will sound
‘BEEP~”, keep pressing until red and blue light are flashing, and you will hear a
‘BIBI’sound, this means the unit is ready to be paired.
2. The first time your unit is paired, use your device to search for the product model
“PBTW20”.
3. When your device finds the product model, press to connect, your device will show
if it is successfully connected or not.
4. If it is successfully connected, you can play music through the product.
www.PyleAudio.com
Waterproof Bluetooth Stereo Wireless Shower Speaker System
& Hands Free Speaker-phone
PBTW20
Press to increase the volume. (when at maximum, you will hear ‘Beep~’
sound)
Press
to decrease the volume. (when at minimum, it will have ‘Beep ~”
sound)
Press
to restart the current track. Press twice to play previous track.
Press
to play next track.
Press
to pause/ play the track.
Handfree calling :
Part 1 pick up call:
1. When you have an incoming call, press
to pick up the phone.
2. Press
to increase the speaker volume
3. Press
to decrease the speaker volume
4. After you nish the conversation, press
to hang up.
**Note: To avoid/ reduce echo, please do not turn the speaker to maximum.
Part 2 make a call:
1. Hold
for 2 seconds to redial the last number you dialed.
2. Some Smartphones have voice command, press
once to enter voice
command function with your Smartphone. For details, please refer your
Smartphone's instruction. This function is different depending on your
Smartphone's setting.
3. After you nish the conversation, press
to hang up.
Part 3 pick up another incoming call:
Waterproof performance:
The waterproof level of this product complies with IP47 standards, is designed to ensure
normal operation in water at a specied conditions.
Product Description:
Before using this unit:
Product Specifications:
Bluetooth version Bluetooth V2.1 +EDR A2DP and AVRCP
Operating range (maximum)
SNR:
80dB
Impedance:
4ohm
Power supply
4pcs x AA Battery (Alkaline batteries are
recommended)
5V DC plug is optional
Current consumption:
500 mA (Max)
Continuous standby time: # 180 Hours
Continuous transmission time: # 8 hours
#The actual continuous standby/transmission times
may become shorter than those in the specications
depending on the environment or conditions for
keeping/using the unit, etc.
#Batteries are consumables. The battery service time
gradually decreases after the charging and
discharging cycles, even if the batteries are used
properly.
#The battery performance deteriorates quickly if the
unit is kept under high temperature conditions. Please
keep the unit in a cool, well-ventilated location, away
from direct sunli
ght.
Operating Temperature: 90 °F to – 40 °F
Operating humidity range: 20-80% (no condensation)
Product size: 8" (L) x 1.8" (W) x 3.5" (H)
Weight: Approx. 10 oz.
Waterproof performance: IP47
Number of devices that can be
registered
8
1. While you are talking over the phone and receive another incoming call, press
twice to pick up incoming call.
2. Press
twice to switch to another party.
3. Press
once to hang up the phone
Part 4 reject incoming call:
1. When you hear the ring of an incoming call, hold
to reject the call.
2. If you are listening to audio, press
once again to continue playing audio.
Initializing the registration his tory / resetting the hardware :
When unit is turned off, press
& together until you hear a tone
and see a red light.
Using Aux Line in:
When stereo is turned off, directly connect line in cable with your audio device, then
play and control the volume on your device. To save power, please ensure the speaker
Bluetooth mode is turned off.
Please note: these keys
/ / / / are not functional
while playing via line –in cable.
**When the unit is connected to an audio device via an audio cable, please do not use the unit in a
wet or damp environment, because the watertight cap cannot be closed to ensure waterproof
performance.
Caution:
Please take full precautions when setting the ringtone volume.
When this product is paired with a mobile phone, a loud ringtone may startle you
at large volumes, which in turn may result in an accident or a heart attack,
Gradually increase the volume from minimum to louder to set it appropriately.
Do not damage cables that are connected to this product.
Fire and injury may result from damaged cables.
Never leave this product in a car.
Leaving this product in a hot car for many hours will result in rupture of the
built-in battery, sparking, posing signicant danger.
Do not leave this product under high temperature conditions.
This product is a precision electronic device. Avoid using/ keeping this product
in a location that is subject to high temperature, high humidity or direct sunlight
for many hours. When subject to signicant temperature changes in the
environment, this product may malfunction due to condensation inside the
product.
Do not touch the metal parts of this product such as the power supply
connectors and the charging cable’s connector terminals.
Static electricity or fouling may cause a malfunction or electric shock.
Do not disassemble this product.
Do not repair, modify or disassemble this product on your own, unless
operational instructions to the contrary are given in this users manual, Electric
shock, re, or burns may result.
Make sure to close the watertight cap when using this product in a wet or
damp environment.
Make sure to remove any dust, hair, etc., that is present between the
watertight cap and the main unit.
Follow the user’s manual instructions of devices (ex. iPhones and mobile
phones) to be connected to this product.
This product can be wirelessly connected to iPhones, mobile phones, etc. The
setting procedures and precautions are different depending on the devices to be
connected to this product. Carefully readthe users manual for these devices and
observe any precautions.
Do not use/keep this product in a wet or damp environment for a long time
if you do not use it.
Any liquid entering this product may result in troubles, fire, or electric shock.
Do not keep this product within reach of small children.
Unexpected accidents (ex. accidental ingestion) may result.
This product is a precision electronic device. Avoid using/keeping this
product in an environment that is subject to impact/vibration, strong
magnetic forces, static electricity, etc.
FCC Requirement:
Warning: Changes or modications to this unit not expressly approved by the party
responsible for compliance could void the user authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the
limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that inter
ference will not occur in a
particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
4. Reorient or relocate the receiving antenna.
5. Increase the separation between the equipment and receiver.
6. Conn
ect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
7. Consult the dealer or an experienced radio/TV technician for help.
Installing batteries:
Turn to open the battery door according to the label indicator
Please follow the polarity indicated inside of battery compartment.
Put 4 AA batteries(Alkaline batteries are recommended).
You can optionally power by 5V DC adapter.
(Please note that while operating by DC 5V adapter, do not use in wet place)
Pairing the product with your device:
Note:
Terminate any connection between the product and any other device before
starting the paring procedure.
The pairing procedure cannot be started while a Bluetooth connection is
established between the product and a registered device. Terminate the
connection and turn off the product.
Noted that the pairing procedure cannot be started while the product is connected
to a device via an AUX line in cable
Up to eight Bluetooth device can be registered:
When nine or more devices are registered, and you try to add a tenth the
previously re gistered devices will be deleted starting from the oldest, to
register new ones. A device that is registered twice is identified as one device.
Play music:
Bluetooth LED
light indicator
Phone On/Off button
Volume down
Volume up
Restart the track
Play next track
Pause/ Play Microphone
Handle
AUX line in plug
DC 5V adapter plug
Battery door
Stand
Watertight cap
INSTRUCTION MANUAL
Waterproof Wireless Stereo Speaker With Microphone Waterproof Wireless Stereo Speaker With Microphone Waterproof Wireless Stereo Speaker With Microphone Waterproof Wireless Stereo Speaker With Microphone Waterproof Wireless Stereo Speaker With Microphone
www.PyleAudio.com
Please ensure that the watertight cap of the DC line in plug is completely
closed before using this unit. Damage can happen if water is allowed to seep into the
unit from a loosely closed watertight cap.
Water droplets that enter the speaker or microphone holes do not cause damage to
unit. However, the product performance may temporarily decrease until the water
droplets are dried. Problems may include unclear sound and microphone insensitivity
If such circumstances exist, please remove water droplets and dry the product.
32 feet (The transmission distance
changes depending on the environment
where the product is used.
When the battery power is depleted, a beeping alarm will sound, with the
LED lamp blinking red. After a while, speaker will turn off.
FRONT
SIZE: 411(W) X 279(H)mm
COLOUR: BLACK
BACK
SIZE: 548.5(W) X 279(H)mm
COLOUR: BLACK
This product is waterproof and designed with quality stereo sound that will enrich
your bath time, enjoy your favor music at anywhere at any time. Its Bluetooth
compatible wireless system allows easy pairing with devices (such as tablets,
notebooks, smartphones & PCs). Also has a built-in microphone to allow you to
talk on the phone while you are in the shower.

Do you have a question about the Pyle Surf Sound?

If you have a question about the "Pyle Surf Sound", don't hesitate to ask. Make sure to describe your problem clearly, this way other users are able to provide you with the correct answer.

Buy related products:

Product specifications

Loudspeakers
Audio output channels   -
Number of speakers   -
Number of drivers   -
Speaker type   -
Performance
Amplifier   -
Recommended usage   Universal
Audio
RMS rated power   -
Frequency range   -
Impedance   -
Ports & interfaces
Connectivity technology Wireless
Bluetooth version   2.1
AUX in yes
Bluetooth range 10
Bluetooth   yes
- Bluetooth
Design
Product colour   White
Protection features   Dust resistant, Water resistant
Power
Power source type   Battery, DC, USB
Battery type   AA
Number of batteries supported   4
Battery life (max)   15
Weight & dimensions
Width   198.1 mm
Depth   45.7 mm
Height   88.9 mm
Weight   517
Packaging content
Batteries included no
Warranty card yes
Manual yes

Related products: