Pyle Surf Sound Talk manual

Pyle Surf Sound Talk

On this page you find the Pyle Surf Sound Talk manual. Please read the instructions in this operator manual carefully before using the product. If you have any questions about your that are not answered in the manual, please share your question in the troubleshooting section on the buttom of this page.

Brand
Pyle
Model
Surf Sound Talk
Product
EAN
68888745147, 68888745154, 68888745161
Language
English
Filetype
PDF
INSTRUCTION MANUAL
While unit is powered off , press & together until sounds
a signal with red light.
Press
(with green LED on), you can hear the sound via handset.
1. To turn on the product, hold for around 7 seconds, a signal will sound
‘BEEP~” keep pressing until the red & blue light is flashing, and you hear the
sound ‘BIBI’, this notifies you that it is ready to be paired.
2. The first time the unit is paired, use your device to search for the product model
“PBTWP24 ”.
3. When your device finds the product model, press to connect, your device will
show if it is successfully connected or not.
4. If it is successfully connected, you can play music through the product.
Note: Terminate any connection between the product and any device before starting the paring procedure.
The pairing procedure cannot be started while a Bluetooth connection is established between the product
and a registered device. Terminate the connection and turn off the product.
Bluetooth Wireless Waterproof Shower Speaker & Hands Free
Speaker-phone
PBTWP24
www.PyleAudio.com
Waterproof performance:
The waterproof level of this product complies with IP47 standards, it is designed to ensure
normal operation in water at a specied conditions.
Product Description:
Switch
speaker
handset
Hanger
Speaker
Function
key
Volume
down
Volume
up
Restart
the track
Play next
track
Pause/ play
DC cable in
Before using this unit:
Product Specifications:
Bluetooth version Bluetooth V2.1 +EDR A2DP and AVRCP
Operating range (maximum)
32 feet (The transmission distance
changed depending on the environment
where the product is used.
SNR speaker
1.5 inch
SNR handset
1 inch
Speaker impedance
4ohm
Handset impedance 8ohm
Power supply Built in Li-Polymer
Battery Capacity 3.7V / 800mAh
Current consumption: 200mA (Max)
Continuous standby time: # 180 Hours
Continuous transmission time: # 8 hours
#The actual continuous standby/transmission times may become shorter than those in the specications
depending on the environment or conditions for keeping/using the unit, etc.
#Battery degrades in time. The battery service time gradually decreases after charging and discharging
several cycles, even if the batteries are used properly.
#The battery performance deteriorates quickly if the unit is kept under high temperature conditions. Please keep
the unit in a cool, well-ventilated location, away from direct sunlight.
Operating Temperature: 90 °F to – 40 °F
Operating humidity range:
20-80% (no condensation)
Product size:
2.5"(W) x 5.9"(H) x 1.6"(D) inch
Weight:
4.86 oz.
Waterproof performance:
IP47
Number of devices that can be
registered
8
2 IN 1 WATERPROOF BLUETOOTH SPEAKER + HANDSET 2 IN 1 WATERPROOF BLUETOOTH SPEAKER + HANDSET 2 IN 1 WATERPROOF BLUETOOTH SPEAKER + HANDSET 2 IN 1 WATERPROOF BLUETOOTH SPEAKER + HANDSET 2 IN 1 WATERPROOF BLUETOOTH SPEAKER + HANDSET
Charging the battery:
Charging the battery from your PC via the USB charging cable, included
in the package.
The LED lamp will be red while the battery is charging.
The LED lamp will be off when the battery is fully charged.
It takes around 1.5 hours to fully charge the batterys
1. Connect the USB charging cable to the unit
2. Connect the USB charging cable to your PC
* when he battery power is depleted , a beeping alarm will sound, and the LED
lamp will blink red. After a while, product will turn off
Pairing the product with your device:
When nine or more devices are registered, the previously registered devices will be
deleted starting from the oldest, to register new ones. A device that is registered twice
or more is identied as one device.
Play music:
Press
to increase the volume. (when up to maximum, it will sound a‘Beep~’
sound)
Press
to decrease the volume. (when up to minimum, it will sound a ‘Beep ~'
sound)
Press
to restart the current track. Press twice to play previous track.
Up to eight Bluetooth device scan be registered:
www.PyleAudio.com
Press to play next track.
Press
to pause/ play the track.
Press
1. when it is lit green LED, sound source play via handset
2. when it is not lit, sound source plays via speaker
Hold
for 7 seconds to turn off connection of Bluetooth
Part 1: pick up call:
1. For incoming call, press
to pick up the call, you will hear sound via speaker
2. Press
(with green LED on), you can hear the sound via handset. Press
(with green LED light off) to switch the sound source to speaker
3. Whenever you are hearing sound source via speaker or handset, you can
or
to adjust the sound source volume.
4. Press
once to mute sound , press once again to return to normal.
5. After nish the conversation, please
to hang up.
**Note: To avoid / reduce echo, please do not turn the speaker to maximum volume.
** The blue light will be blinking for all incoming call.
** The blue light will be blinking when talking via speaker
** The green light button will lit up when talking via handset
Part 2: Make a call:
1. Hold for 2 seconds to redial the latest call you make.
2. Some smartphones have voice command, press
once to enter voice
command function with your smartphone. For details , please refer your
smartphone instructions. This feature may be different depending on your
smartphone's settings.
3. After you are nished with the conversation, press
to hang up.
Part 3: Pick up another incoming call:
1. While you are talking over the phone and have another incoming call, press
twice to pick up incoming call.
2. Press twice
to switch to the other party.
3. Press once
to hang up the phone
Part 4 reject incoming call:
1. While unit is ringing with incoming call, hold
to reject the call.
2. If you are playing the song, press
once again to continue playing the song.
Speaker & handset sound source switching:
Press
(with green LED light off) to hear the sound via speaker
Initializing the registration history / resetting the hardware of product:
Caution:
Please take full precautions when setting the ringtone volume.
When thi s product is paired with a mobile phone, a loud ringtone may startle
you , which in turn may result in an accident or a heart attack, Gradually increase
the volume from the minimum to set it appropriately.
Do not damage cables that are connected to this product.
Fire may result from damaged cables.
Never leave this product in a car.
Leaving this product in a hot car for many hours will result in rupture of the
built -in battery, sparking, and other dangers , posing signicant danger.
Do not leave this product under high temperature conditions.
This product is a precision electronic device. Avoid using/ keeping this product
in a location that is subject to high temperature, high humidity or direct sunlight
for many hours. When subject to signicant temperature changes in the
environment, this product may malfunction due to condensation inside the
product.
Do not touch the metal parts of this product such as the power supply
connectors and the charging cable’s connector terminals.
Static electricity or fouling m ay cause a malfunction or electric shock.
Do not disassemble this product.
Do not repair, modify or disassemble this product on your own, unless
operational instructions to the contrary are given in this users manual, Electric
shock, re, or burns may result.
Make sure to close the watertight cap when using this product in a wet or
damp environment.
Make sure to remove any dust, hair, etc., that is present between the
watertight cap and the main unit.
Follow the user’s manual instructions of devices (ex. iPhones and mobile
phones) to be connected to this product.
This product can be wirelessly connected to iPhones, mobile phones, etc. The
setting procedures and precautions are different depending on the devices to be
connected to this product. Carefully re ad the users manual for these devices
and observe any precautions.
Do not use/keep this product in a wet or damp environment for a long time
if you do not use it.
Any liquid entering this product may result in danger ,re, or electric shock.
Do not keep this product within reach of small children.
Unexpected accidents (ex. accidental ingestion) may result.
This product is a precision electronic device. Avoid using/keeping this
product in an environment that is subject to impact/vibration, strong
magnetic forces, static electricity, etc.
Risk of explosion if battery is replaced by an incorrect type. Dispose of used
batteries according to the instructions.
FCC Requirement:
Warning: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the warranty.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference
to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FRONT
SIZE: 411(W) X 279(H)mm
COLOUR: BLACK
BACK
SIZE: 411(W) X 279(H)mm
COLOUR: BLACK
This product is of waterproof construction with quality sound that will enrich your
shower time, enjoy your favorite music, anywhere and anytime. This Bluetooth
wireless system can be easily paired with most Bluetooth devices (such as tablets,
notebooks, smartphones, PCs, etc.). Also, built - in microphone enables you to talk
on thephone while you are showering.
Please ensure that the watertight cap of the DC plug is securely closed
before using this unit. Damage can happen to unit by water seeping into the unit
from to loosely closed watertight cap.
Water droplets that enter the speaker or microphone holes do not cause damage.
However, the product performance may temporarily decrease until the water droplets are
dried. Problems may include unclear sound and microphone insensitivity. If such
circumstances exist, please remove water droplets and dry the product

Do you have a question about the Pyle Surf Sound Talk?

If you have a question about the "Pyle Surf Sound Talk", don't hesitate to ask. Make sure to describe your problem clearly, this way other users are able to provide you with the correct answer.

Buy related products:

Product specifications

Loudspeakers
Audio output channels   -
Number of speakers   -
Number of drivers   -
Speaker type   -
Performance
Amplifier   -
Recommended usage   Universal
Audio
RMS rated power   2
Frequency range   -
Impedance   4
Ports & interfaces
Connectivity technology Wireless
Bluetooth version   2.1
USB charging port yes
Bluetooth range 10
Bluetooth   yes
- Bluetooth
Design
Product colour   Blue, White
Protection features   Dust resistant, Water resistant
Power
Power source type   Battery, USB
Battery type   Built-in
Battery voltage   3.7
Battery life (max)   8
Battery technology   Lithium Polymer (LiPo)
Battery capacity   800
Battery recharge time   1.5
Standby time 180
Weight & dimensions
Width   64.8 mm
Depth   38.1 mm
Height   152.4 mm
Weight   267.7
Packaging content
Warranty card yes
Cables included USB
Manual yes

Related products: