Polycom SoundStation IP 5000 manual

Polycom SoundStation IP 5000

On this page you find the Polycom SoundStation IP 5000 manual. Please read the instructions in this operator manual carefully before using the product. If you have any questions about your that are not answered in the manual, please share your question in the troubleshooting section on the buttom of this page.

SoundStation IP 5000
1725-30960-001 Rev B. February 2013
Polycom® SoundStation®
IP 5000
Quick User Guide
Applies to phones running SIP 3.2.3 or
For detailed information, see the
User Guide for the Polycom SoundStation
IP 5000 Phone available at:
© 2013, Polycom, Inc. All rights reserved. POLYCOM®, the
Polycom logo and the names and marks associated with
Polycom’s products are trademarks and/or service marks of
Polycom, Inc. and are registered and/or common law marks
in the United States and various other countries. All other
trademarks are property of their respective owners. No
portion hereof may be reproduced or transmitted in any form
or by any means, for any purpose other than the recipient’s
personal use, without the express written permission of
Placing Calls
Press , enter the phone
number, and then press the Send
soft key.
Answering Calls
Press the Answer soft key.
To ignore an incoming call, press
the Reject soft key.
Ending Calls
During a call, press or the
End Call soft key.
Redialing Numbers
To call the last number you
dialed, press .
Muting the Microphone
During a call, press . The
console LEDs will glow red.
You can hear all other parties
while Mute is enabled. The other
parties cannot hear you.
To turn off Mute, press
Holding and Resuming Calls
During a call, press the Hold soft
key. The console LEDs will blink
To resume the call, press the
Resume soft key.
Transferring Calls
To transfer a call:
1. During a call, press the Trnsfer
soft key. The active call is
placed on hold.
2. Enter the number of the party
to which you want to transfer
the call, and then press the
Send soft key.
To cancel the transfer before
the call connects, press the
Cancel soft key. The original
call resumes.
3. When you hear the ring-back
sound, or after you speak with
the second party, press the
Trnsfer soft key.
Forwarding Calls
To enable call forwarding:
1. From the idle screen, press the
Forward soft key.
2. Select the forwarding type you
want to enable:
Always—To forward all
incoming calls.
No Answer—To forward all
unanswered incoming calls.
Busy—To forward calls that
arrive when you are already
in a call.
3. Enter a number to forward calls
to. For No Answer, enter the
number of rings before
4. Press the Enable soft key.
To disable call forwarding:
1. From the idle screen, press the
Forward soft key.
2. Select the forwarding type you
want to disable.
3. Press the Disable soft key.
Using Do Not Disturb
To prevent your phone from
ringing, enable Do Not Disturb.
, and then select
Features > Do Not Disturb.
You can automatically transfer the
call without speaking to the second
party. After you complete step 1,
press the Blind soft key. Then,
complete step 2.

Do you have a question about the Polycom SoundStation IP 5000?

If you have a question about the "Polycom SoundStation IP 5000", don't hesitate to ask. Make sure to describe your problem clearly, this way other users are able to provide you with the correct answer.

Buy related products:

Product specifications

Technical details
Frequency range   250 - 7000
Dynamic range 84
Power over Ethernet (PoE)   yes
Compliance industry standards   IEEE 802.3, IEEE 802.3u
Ports & interfaces
Ethernet LAN (RJ-45) ports   1
Power consumption (typical)   19
Weight & dimensions
Dimensions (WxDxH)   265 x 285 x 65 mm
Weight   520
Operational conditions
Operating temperature (T-T)   5 - 40