Pioneer ND-BC6

Pioneer ND-BC6 manual

  • PIONEER CORPORATION
    1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, JAPAN
    PIONEER ELECTRONICS (USA) INC.
    P.O. Box 1540, Long Beach, California 90801-1540, U.S.A.
    TEL: (800) 421-1404
    PIONEER EUROPE NV
    Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium/Belgique
    TEL: (0) 3/570.05.11
    PIONEER ELECTRONICS ASIACENTRE PTE. LTD.
    253 Alexandra Road, #04-01, Singapore 159936
    TEL: 65-6472-7555
    PIONEER ELECTRONICS AUSTRALIA PTY. LTD.
    5 Arco Lane, Heatherton, Victoria, 3202 Australia
    TEL: (03) 9586-6300
    PIONEER ELECTRONICS OF CANADA, INC.
    340 Ferrier Street, Unit 2, Markham, Ontario L3R 2Z5, Canada
    TEL: 1-877-283-5901
    TEL: 905-479-4411
    PIONEER ELECTRONICS DE MEXICO, S.A. de C.V.
    Blvd. Manuel Avila Camacho 138 10 piso
    Col. Lomas de Chapultepec, Mexico, D.F. 11000
    TEL: 55-9178-4270
    © 2012 PIONEER CORPORATION.
    All rights reserved.
    © 2012 PIONEER CORPORATION.
    Tous droits de reproduction et de traduction
    réservés.
    Printed in China
    Imprimé en Chine
    <231.0005150Y> EL<KYTNX> <12G00000>
    Owner’s Manual
    Mode d’emploi
    UNIVERSAL REAR-VIEW CAMERA
    CAMERA DE RECUL UNIVERSELLE
    ND-BC6
    Glass surface
    Make sure it doesn’t touch the wiper
    Install on the center part
    Fig. 1
    Abb. 1
    𝖠 Rear view camera × 1 𝖢 Power supply unit × 1𝖡 RCA power supply cable × 1
    𝖣 Hexagon wrench × 1 𝖤 Hook and loop fastener
    (soft type) × 1
    𝖥 Hook and loop fastener
    (hard type) × 1
    𝖧 Waterproof
    pad × 1
    𝖦 Clamp × 6 𝖨 Double-sided
    tape × 1
    Fig. 4
    Abb. 4
    Fig. 8
    Abb. 8
    Fig. 6
    Abb. 6
    Fig. 9
    Abb. 9
    Bumper or rear edge of car
    Power supply unit
    Hook and loop
    fastener
    (hard type)
    Hook and loop
    fastener
    (soft type)
    Camera
    stand
    Fig. 2
    Abb. 2
    Fig. 3
    Abb. 3
    This device complies with part 15 of the FCC
    Rules.
    Operation is subject to the following two
    conditions:
    (1) This device may not cause harmful interference,
    and (2) this device must accept any interference
    received, including interference that may cause
    undesired operation.
    Information to User
    Alteration or modifications carried out without
    appropriate authorization may invalidate the user’s
    right to operate the equipment.
    Note:
    This equipment has been tested and found to comply
    with the limits for a Class B digital device, pursuant
    to Part 15 of the FCC Rules. These limits are
    designed to provide reasonable protection against
    harmful interference in a residential installation.
    This equipment generates, uses and can radiate radio
    frequency energy and, if not installed and used in
    accordance with the instructions, may cause harmful
    interference to radio communications. However, there
    is no guarantee that interference will not occur in a
    particular installation. If this equipment does cause
    harmful interference to radio or television reception,
    which can be determined by turning the equipment
    off and on, the user is encouraged to try to correct
    the interference by one or more of the following
    measures:
    Reorient or relocate the receiving antenna.
    Increase the separation between the equipment and
    receiver.
    Connect the equipment into an outlet on a circuit
    different from that to which the receiver is
    connected.
    Consult the dealer or an experienced radio/TV
    technician for help.
    If you want to dispose this product, do not
    mix it with general household waste. There
    is a separate collection system for used elec-
    tronic products in accordance with legisla-
    tion that requires proper treatment, recovery
    and recycling.
    Private households in the member states of the EU,
    in Switzerland and Norway may return their used
    electronic products free of charge to designated col-
    lection facilities or to a retailer (if you purchase a
    similar new one). For countries not mentioned above,
    please contact your local authorities for the correct
    method of disposal. By doing so you will ensure that
    your disposed product undergoes the necessary treat-
    ment, recovery and recycling and thus prevent poten-
    tial negative effects on the environment and human
    health.
    WARNING:
    Handling the cord on this product or cords associated
    with accessories sold with the product may expose
    you to chemicals listed on proposition 65 known to
    the State of California and other governmental enti-
    ties to cause cancer and birth defect or other repro-
    ductive harm. Wash hands after handling.
    IMPORTANT
    SAFEGUARDS
    Installation and wiring of this product require spe-
    cialist skill and experience. To assure your safety,
    please request a specialist technician to install the
    unit.
    Do not attempt to heat the surface of the camera
    lens or camera lens itself with a lighter and so on
    when they have become frozen. This can cause a
    malfunction.
    This product is a rear view camera for checking
    the view at the rear of a car.
    A rear view camera is a camera that provides sym-
    metrical images in the same way as rear and side
    view mirrors.
    Connection to a TV with an RCA video input is
    possible, but confirm whether the TV you use has
    a reverse gear connection function.
    This product is designed to supplement the driver’s
    rear view, but the camera images do not show all
    dangers and obstacles. Be sure to look behind you
    when reversing to confirm the view.
    This product features a wide-angle lens, so the
    near view is wide and the far view is narrow,
    which may create a false sense of distance. Be
    sure to look behind you when reversing to confirm
    the view.
    Do not wash your car with an automatic car wash
    or high-pressure water as it may result in water
    entering the camera or the camera falling off.
    Check camera stand installation before driving.
    Are the screws loose?
    – Is the camera stand firmly secured?
    – If the rear view camera comes loose while you
    are driving it may cause an accident.
    This product by itself does not display guidelines.
    Be sure not to hide any part of the char-
    acters on the license plate when attaching
    the camera.
    Fig.5
    Abb. 5
    00-00
    Fig. 7
    Abb. 7
    Top
    Mark
    Bottom
    Make sure to install the rear view camera so
    that the mark is located on top of the camera.
    Hexagon wrench

Do you have a question about the Pioneer ND-BC6?

Ask the question you have about the Pioneer ND-BC6 here simply to other product owners. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Pioneer ND-BC6 owners to provide you with a good answer.

View here the free Pioneer ND-BC6 manual. Have you read the manual but does it answer your question? Then ask your question on this page to other Pioneer ND-BC6 owners.

Product specifications

Brand Pioneer
Model ND-BC6
Product Security camera
EAN 31112434773, 884938204033
Language English, German, French, Spanish, Italian
Filetype PDF
Video
Maximum resolution -
Supported video modes -
Analog signal format system NTSC
Camera
Minimum illumination 0
Image sensor
Sensor type CMOS
Optical sensor size 1/4 2011-05-04 11:27:54 2012-06-08 13:40:02 12 28 1 RPM 0000-00-00 00:00:00 2012-06-08 13:40:02 14 30 1 M 0000-00-00 00:00:00 2012-06-08 13:40:02 15 31 1 kHz 0000-00-00 00:00:00 2012-06-08 13:40:02 16 32 1 ° 0000-00-00 00:00:00 2012-06-08 13:40:02 17 33 1 x
Lens system
Optical zoom -
Storage
Built-in HDD
Night vision
Night vision
Performance
Type -
PTZ control (Pan/Tilt/Zoom)
Placement supported -
Connectivity technology Wired
Design
Form factor box
Product colour Black
Network
Ethernet LAN
Wi-Fi
Power
Power over Ethernet (PoE)

Buy related products:

    Related products

    Security camera Pioneer