Panasonic SC-HC05 manual

Panasonic SC-HC05

On this page you find the Panasonic SC-HC05 manual. Please read the instructions in this operator manual carefully before using the product. If you have any questions about your that are not answered in the manual, please share your question in the troubleshooting section on the buttom of this page.

Brand
Panasonic
Model
SC-HC05
Product
EAN
885170039414
Language
English
Filetype
PDF
Website
http://www.panasonic.com/
Product service
Using an iPod or iPhone
Using the auto off function
Overview of controls
Listening to the Internet radio
Getting started
Specifications
Maintenance
Owners Manual
Compact Stereo System
Model No. SC-HC05
Panasonic Consumer Electronics Company,
Division of Panasonic Corporation of North America
One Panasonic Way, Secaucus,
New Jersey 07094
http://www.panasonic.com
© Panasonic Corporation 2011
Printed in China
P
Sp
En
RQTX1316-2P
L0111HH2031
Dear Customer
Thank you for purchasing this system.
For optimum performance and safety, read these
instructions fully before you connect, operate or adjust
this system.
Keep this manual for future reference.
Your system and the illustrations can look differently.
If you have any questions contact
1-800-211-PANA (7262)
The warranty can be found on the next page.
As an ENERGY STAR
®
Partner,
Panasonic has determined
that this product meets the
ENERGY STAR
®
guidelines for
energy efficiency.
IMPORTANT SAFETY INSTRUCTIONS
Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety
instructions listed below. Keep these operating instructions handy for future reference.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturers instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce
heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the
other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your
safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they
exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
CAUTION!
DO NOT INSTALL OR PLACE THIS UNIT IN A
BOOKCASE, BUILT-IN CABINET OR IN ANOTHER
CONFINED SPACE. ENSURE THE UNIT IS WELL
VENTILATED. TO PREVENT RISK OF ELECTRIC
SHOCK OR FIRE HAZARD DUE TO OVERHEATING,
ENSURE THAT CURTAINS AND ANY OTHER
MATERIALS DO NOT OBSTRUCT THE VENTILATION
VENTS.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK
OR PRODUCT DAMAGE,
DO NOT EXPOSE THIS APPARATUS TO RAIN,
MOISTURE, DRIPPING OR SPLASHING AND THAT
NO OBJECTS FILLED WITH LIQUIDS, SUCH AS
VASES, SHALL BE PLACED ON THE APPARATUS.
USE ONLY THE RECOMMENDED ACCESSORIES.
DO NOT REMOVE THE COVER (OR BACK); THERE
ARE NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
CAUTION!
Danger of explosion if battery is incorrectly replaced. Replace
only with the same or equivalent type recommended by the
manufacturer. Dispose of used batteries according to the
manufacturers instructions.
WARNING
Risk of fire, explosion and burns. Do not disassemble, heat
above 60°C (140°F) or incinerate.
WARNING
Keep the Button-Type battery out of reach of children to
prevent swallowing.
– If you see this symbol –
Information on Disposal in other Countries outside the
European Union
This symbol is only valid in the European Union.
If you wish to discard this product, please
contact your local authorities or dealer and ask
for the correct method of disposal.
< For USA-California only >
This product contains a CR Coin Cell Lithium Battery which
contains Perchlorate Material - special handling may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate.
The Bluetooth
®
word mark and logos are owned by the
Bluetooth SIG, Inc. and any use of such marks by Panasonic
Corporation is under license. Other trademarks and trade
names are those of their respective owners.
FCC Note:
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules.
These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of
the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for
help.
FCC caution: To maintain compliance with FCC regulations,
shielded interface cables must be used with this equipment.
Operation with non-approved equipment or unshielded cables
may result in interference to radio and TV reception. Any
changes or modifications not approved by the party responsible
for compliance could void the users authority to operate this
equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
Responsible Party:
Panasonic Corporation of North America
One Panasonic Way
Secaucus, NJ 07094
Support Contact:
Panasonic Consumer Electronics Company
Telephone No.: 1-800-211-PANA (7262)
WARNING:
To satisfy FCC RF exposure requirements for mobile
transmitting devices, a separation of 20 cm or more should be
maintained between the antenna of this device and persons
during device operation. To ensure compliance, operations at
closer than this distance are not recommended. The antenna
used for this transmitter must not be co-located in conjunction
with any other antenna or transmitter.
“Made for iPod” and “Made for iPhone” mean that an electronic
accessory has been designed to connect specifically to
iPod, or iPhone, respectively, and has been certified by the
developer to meet Apple performance standards.
Apple is not responsible for the operation of this device or its
compliance with safety and regulatory standards.
Please note that the use of this accessory with iPod, or iPhone
may affect wireless performance.
iPhone, iPod, iPod classic, iPod nano, and iPod touch are
trademarks of Apple Inc., registered in the U.S. and other
countries.
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE SCREWS.
NO USER-SERVICEABLE PARTS
INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
The model number and serial number of this product can be
found on either the back or the bottom of the unit.
Please note them in the space provided below and keep for
future reference.
MODEL NUMBER
SERIAL NUMBER
User memo:
DATE OF PURCHASE
DEALER NAME
DEALER ADDRESS
TELEPHONE NUMBER
Product identification marking is located on the bottom of unit.
The unit should be installed near an accessible AC power
outlet, with the power cord connected directly to it.
To completely disconnect power from the unit, unplug the
power cord from the AC power outlet.
SC-HC05
Supplied Accessories
Check and identify the supplied accessories.
Use numbers indicated in parentheses when asking for
replacement parts. (Product numbers correct as of January
2011. This may be subject to change.)
To order accessories, refer to “Accessory Purchases
(United States and Puerto Rico)” on the next page.
1 x AC power supply cord
(K2CB2CB00021)
1 x Remote control
(RAK-SC989ZM)
1 x Lithium Button-Type battery
(Battery is already installed in the remote control.)
1. Damage requiring service — The unit should be serviced
by qualified service personnel if:
(a) The AC power supply cord or the plug has been
damaged; or
(b) Objects or liquids have gotten into the unit; or
(c) The unit has been exposed to rain; or
(d) The unit does not operate normally or exhibits a marked
change in performance; or
(e) The unit has been dropped or the cabinet damaged.
2. Servicing — Do not attempt to service the unit beyond that
described in these operating instructions. Refer all other
servicing to authorized servicing personnel.
Connecting an iPod or iPhone
Preparation
Update your iPod or iPhone with the latest software.
Make sure to remove the iPod or iPhone from its case.
1 Push [
x
, iPod] to open the dock.
2 Insert a compatible dock adapter.
3 Connect the iPod or iPhone.
The status indicator changes to green.
Hold the dock when connecting or disconnecting the iPod
or iPhone.
To close the dock
1 Disconnect the iPod or iPhone.
2 Press [PUSH CLOSE] while closing the dock.
Note:
Make sure to align your iPod or iPhone with the connector
when inserting.
Make sure to press [PUSH CLOSE] while closing the dock to
prevent damage.
When an iPod or iPhone is connected, press [SELECTOR]
to switch between modes (Internet radio, Bluetooth
®
, AUX or
iPod).
The system automatically switches on when you connect an
iPod or iPhone that is in playback mode (except for some
models).
To purchase a dock adapter, consult your local iPod or
iPhone dealer.
Connector
iPhone
(not included)
Dock adapter
(not included)
The system automatically switches off if there is no audio input
and you do not use it for approximately 30 minutes.
1 Press [SELECTOR] to select AUX mode.
Status indicator: Off
2 Press and hold [OK].
ON OFF
(default)
ON : The light blue status indicator blinks 2 times.
OFF : The light blue status indicator blinks 1 time.
3. Replacement parts — When parts need replacing ensure
the servicer uses parts specified by the manufacturer or
parts that have the same characteristics as the original
parts. Unauthorized substitutes may result in fire, electric
shock, or other hazards.
4. Safety checkAfter repairs or service, ask the servicer
to perform safety checks to confirm that the unit is in proper
working condition.
Product information
For product information or assistance with product operation:
Refer to “Customer Services Directory (United States and
Puerto Rico)”.
Basic playback
1 Connect the iPod or iPhone.
2 Press [
4
/
9
] to start playback.
Pause playback
Press [
4
/
9
].
Press again to continue playback.
Skip track
Press [
2
] or [
6
].
Search track
Press and hold [
2
] or [
6
].
View the iPod or
iPhone menu
Press [iPod MENU].
Select an item
Press [
R
] or [
T
] and then press
[OK].
Note:
Depending on the model, it may be necessary to remove the
iPod or iPhone and select the album, artist, etc. on the iPod
or iPhone.
Operation results may vary depending on the iPod or iPhone
models.
Read the User Guide of the iPod or iPhone for operating
instructions.
Compatible iPod and iPhone
(as of January 2011)
iPod touch 4th generation (8GB, 32GB, 64GB)
iPod nano 6th generation (8GB, 16GB)
iPod touch 3rd generation (32GB, 64GB)
iPod nano 5th generation (video camera) (8GB, 16GB)
iPod touch 2nd generation (8GB, 16GB, 32GB)
iPod classic [120GB, 160GB (2009)]
iPod nano 4th generation (video) (8GB, 16GB)
iPod classic (160GB) (2007)
iPod touch 1st generation (8GB, 16GB, 32GB)
iPod nano 3rd generation (video) (4GB, 8GB)
iPod classic (80GB)
iPod nano 2nd generation (aluminum) (2GB, 4GB, 8GB)
iPod 5th generation (video) (60GB, 80GB)
iPod 5th generation (video) (30GB)
iPod nano 1st generation (1GB, 2GB, 4GB)
iPhone 4 (16GB, 32GB)
iPhone 3GS (8GB, 16GB, 32GB)
iPhone 3G (8GB, 16GB)
iPhone (4GB, 8GB, 16GB)
Compatibility depends on the software version of your iPod or
iPhone.
Note:
The display on the iPod can show differently because of the
compatibility of the iPod models.
All phone features can only be controlled by the touch
screen of the iPhone.
The system does not show incoming calls or the phone
status.
Playback will stop when there is an incoming call.
Disconnect the iPhone to answer the call.
A call is not canceled when you connect or disconnect the
iPhone from the system.
There is no Apple Inc. specification that will guarantee the
above iPhone response. iPhone responses can be different
on newer models or with newer software.
Charging an iPod or iPhone
An iPod or iPhone is charged automatically when connected
to the system (even when the system is in standby mode).
See the iPod or iPhone display for its battery charging
status.
Disconnect the iPod or iPhone if it is not used for an
extended period of time after charging is complete.
Charging stops when the battery is fully charged. The battery
will deplete naturally.
Note:
This function does not work when a Bluetooth
®
device is
connected.
1 minute before the system switches off, the power indicator
blinks.
The setting returns to the default when you disconnect the
AC power supply cord.
A Standby/on switch [
`
], [
1
, POWER]
Press to switch the unit from on to standby mode or vice
versa.
In standby mode, the unit is still consuming a small
amount of power.
B View the iPod or iPhone menu
C Select an item
D Confirm a selection
Set or cancel the auto off function
E Select iPod, Internet radio, Bluetooth
®
or AUX mode
Bluetooth
®
is the default mode except when an iPod or
iPhone is connected.
F Start Bluetooth
®
pairing mode
Select Bluetooth
®
link mode
Adjust the audio input level in AUX mode
G Adjust the volume of the system
The setting returns to the default when you disconnect the
AC power supply cord.
H Mute the sound of the system
In iPod mode : The light blue and green status
indicators blink alternately.
In Bluetooth
®
mode : The light blue and blue status
indicators blink alternately.
In AUX mode : The light blue status indicator blinks
continuously.
This function does not work when the system is pairing or
waiting to connect with a Bluetooth
®
device.
Press the button again to cancel.
Mute is also canceled when you adjust the volume or
when you switch off the system.
You can listen to a radio station on the Internet if you install
the “vTuner for Panasonic” application on your iPod touch or
iPhone. Download this application from the App Store.
Note:
For compatible iPod touch and iPhone models and
instructions on how to use the “vTuner for Panasonic”
application, refer to:
http://radio.vtuner.com/panasonic/en/
Preparation
Install “vTuner for Panasonic” on your iPod touch or iPhone.
Connect your iPod touch or iPhone to the Internet. Go to the
Home screen of the iPod touch or iPhone.
1 Connect the iPod touch or iPhone.
2 Press [SELECTOR] to start the application.
MUTE
SELECTOR
iPod MENU
OK
LINK MODE
PAIRING
I Start or pause playback
J Skip or search track
K Power indicator
On : The system is on
Off : The system is in standby mode
L iPod or iPhone dock
M Status indicator
Green : iPod mode
Blue : Bluetooth
®
mode
Light blue : Set or cancel the auto off function
Mute function is on
Off : AUX mode
The green status indicator blinks each time a remote
control button is pressed.
N [PUSH CLOSE]
Press while closing the dock.
O Remote control sensor
Point the remote control at the remote control sensor,
away from obstacles, at a maximum range of 7 m (23 ft)
directly in front of the main unit.
Amplifier section
RMS output power stereo mode
Front Ch (both ch driven)
20 W per channel (6
), 1 kHz, 10% THD
Total RMS stereo mode power 40 W
FTC output power stereo mode
Front Ch (both ch driven)
15 W per channel (6
), 20 Hz to 20 kHz, 10% THD
Total FTC stereo mode power 30 W
Terminal section
AUX (rear)
Terminal Stereo, 3.5 mm (
1
/
8
) jack
Speaker section
Type 2 way, 2 speaker system (passive radiator)
Speaker unit(s)
Woofer 6.5 cm (2
1
/
2
) cone type x 1/ch
Tweeter 1.5 cm (
5
/
8
) piezo type x 1/ch
Passive radiators 8 cm (3
1
/
8
) x 2/ch
Impedance 6
Bluetooth
®
section
Bluetooth
®
system specification Ver. 2.1 + EDR
Wireless equipment classification Class 2 (2.5 mW)
Support profiles A2DP, AVRCP
Frequency band
2402 MHz to 2480 MHz (Adaptive Frequency Hopping)
Driving distance 10 m (33 ft) line of sight
(iPhone 4, at height 1 m (3.3 ft), in MODE 1)
General
Power supply AC 120 V, 60 Hz
Power consumption 16 W
Dimensions (W x H x D) 370 mm x 176 mm x 85 mm
(14
1
/
2
x 7 x 3
1
/
2
)
[D = 121 mm (4
3
/
4
) dock open]
[D = 59 mm (2
1
/
2
) without stand]
Mass (Weight) 1.8 kg (9 lb.)
Operating temperature range 0°C to +40°C
(+32°F to +104°F)
Operating humidity range
35% to 80% RH (no condensation)
Power consumption in standby mode
0.1 W (approximate)
Note:
1. Specifications are subject to change without notice.
Mass and dimensions are approximate.
2. Total harmonic distortion is measured by the digital
spectrum analyzer.
Top view
Remote control
Before using
Remove the insulation sheet before you use the remote
control for the first time.
Replacing the battery
Replace the remote control battery when it stops operating
or when the range is decreased. Replace with a new battery
(CR2025) only.
1 While pressing the stopper, pull out the battery
holder.
2 Insert a new battery with the (+) side facing up.
3 Push the battery holder back fully.
CAUTION!
Insert with poles aligned.
Do not touch the terminals (+ and –) with metal objects.
Do not recharge, disassemble, remodel, heat or throw into
fire.
Keep out of reach of children.
Do not heat or expose to flame.
Do not leave the battery(ies) in an automobile exposed
to direct sunlight for a long period of time with doors and
windows closed.
Remove the battery if you do not use the remote control for
a long period of time. Keep in a cool, dark area.
If any electrolyte should come into contact with your hands or
clothes, wash it off thoroughly with water.
If any electrolyte should come into contact with your eyes,
never rub the eyes.
Rinse eyes thoroughly with water, and then consult a doctor.
Insulation sheet
Stopper
Battery holder
Connect the AC power supply cord
Rear view
Use the included AC power supply cord with this system
only.
Do not use an AC power supply cord from other equipment.
Conserving power
The system consumes approximately 0.1 W when it is in
standby mode. Disconnect the power supply if you do not use
the system. Some settings will be lost after you disconnect the
system. You have to set them again.
Speakers
Do not remove the speaker nets.
These speakers do not have magnetic shielding. Do not put
them near TVs, PCs or other devices easily influenced by
magnetism.
When you play at high levels for a long period, it can cause
damage to the system and decrease the life of the system.
Decrease the volume when you play distorted sound to
prevent damage.
To household AC outlet
To clean this system, wipe with a soft, dry cloth.
Never use alcohol, paint thinner or benzine to clean this system.
Before using chemically treated cloth, read the instructions that came with the cloth carefully.
HC05_P2_us_le.indd 1HC05_P2_us_le.indd 1 3/15/2011 8:45:37 AM3/15/2011 8:45:37 AM

Do you have a question about the Panasonic SC-HC05?

If you have a question about the "Panasonic SC-HC05", don't hesitate to ask. Make sure to describe your problem clearly, this way other users are able to provide you with the correct answer.

Buy related products:

Product specifications

Audio
Audio output channels   2.0
RMS rated power   40
Frequency range   -
Impedance   6
Ports & interfaces
Headphone connectivity   -
Bluetooth   yes
AUX in yes
DC-in jack   yes
Radio
FM radio   no
Display
Display   LED
Performance
Apple docking compatibility   iPod
Equalizer   no
Power
Built-in charger   yes
Power source type   AC
Auto power off   yes
AC input voltage   120
AC input frequency 60
Power consumption (typical)   16
Power consumption (standby)   0.05
Other features
Dimensions (WxDxH)   370 x 85 x 176 mm
Weight & dimensions
Weight   1800
Design
Product colour   White

Related products: