Nite Icon-212 Green T100 Automatic manual

  • Icon Automatic Series Handbook
    Technical Specifications
    GTLS RATING
    T25 or T100
    CASE MATERIAL
    316 stainless steel
    CASE FINISH
    Black PVD or brushed stainless steel
    STRAP TYPE
    Leather strap or stainless steel bracelet
    CRYSTAL
    Sapphire with triple anti-reflective coating
    MOVEMENT TYPE
    Automatic
    MOVEMENT
    Swiss made Sellita SW200-1
    CROWN TYPE
    Screw down
    DIAL DIAMETER
    38mm
    CASE DIAMETER
    44mm
    CASE DEPTH
    14.1mm
    LUG WIDTH
    22mm
    FIXING TYPE
    2 x 22mm spring bars
    (https://www.nitewatches.com/store/gb/screws-
    pins/pack-of-two-22mm-spring-bars/)
    WEIGHT
    95g Fitted on leather strap
    195g Fitted on steel bracelet
    WATER RESISTANCE
    100m
    Setting the time and date
    Unscrew the crown by turning anti-clockwise.
    Position 1 is for winding the power. Wind the crown in a clockwise direction to re-
    power the watch.
    Pull the crown gently into position 2 and turn the crown in a clockwise direction to the
    desired date.
    Pull the crown gently into position 3 and turn the crown in a clockwise direction to
    move the time forward and anti-clockwise direction to move time back.

Do you have a question about the Nite Icon-212 Green T100 Automatic?

Ask the question you have about the Nite Icon-212 Green T100 Automatic here simply to other product owners. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Nite Icon-212 Green T100 Automatic owners to provide you with a good answer.

View here the free Nite Icon-212 Green T100 Automatic manual. Have you read the manual but does it answer your question? Then ask your question on this page to other Nite Icon-212 Green T100 Automatic owners.