Nite Hawk-201 manual

  • Hawk Series Handbook
    Technical Specifications
    GTLS RATING
    T25 or T100
    CASE FINISH
    Black polycarbonate
    STRAP TYPE
    Polymer or stainless steel bracelet
    CRYSTAL
    Sapphire with triple anti-reflective coating
    MOVEMENT TYPE
    Quartz
    MOVEMENT
    Swiss made Ronda 715Li
    CROWN TYPE
    Push
    DIAL DIAMETER
    33mm
    CASE DIAMETER
    51mm
    CASE DEPTH
    14.6mm
    LUG WIDTH
    24mm
    FIXING TYPE
    2 x 24mm spring bars
    (https://www.nitewatches.com/store/gb/screws-
    pins/pack-of-two-24mm-spring-bars/)
    WEIGHT
    70g Fitted on polymer strap
    162g Fitted on steel bracelet
    WATER RESISTANCE
    200m
    BATTERY LIFE
    10 Years
    Setting the time and date
    Pos. I Position of rest (watch running)
    Pos. II Quick-change correction for date
    Blocking time for the quick-change day correction is from approx. 9.30 pm and
    midnight.
    Pull the crown out to position II (watch still running).
    Turn the crown until the current date appears.
    Push the crown back into position I.
    Pos. III Setting the time
    Pull the crown out to position III (watch stopped).
    Turn the crown, until the current time is displayed
    (remember the 24-hour cycle).
    Push the crown back into position I.

Do you have a question about the Nite Hawk-201?

Ask the question you have about the Nite Hawk-201 here simply to other product owners. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Nite Hawk-201 owners to provide you with a good answer.

View here the free Nite Hawk-201 manual. Have you read the manual but does it answer your question? Then ask your question on this page to other Nite Hawk-201 owners.