Nite Alpha-202 manual

  • Alpha Series Handbook
    Technical Specifications
    GTLS RATING
    T100
    CASE MATERIAL
    316 stainless steel
    CASE FINISH
    Black PVD or brushed stainless steel
    STRAP TYPE
    Polymer or stainless steel bracelet
    CRYSTAL
    Sapphire with triple anti-reflective coating
    MOVEMENT TYPE
    Quartz
    MOVEMENT
    Swiss made Ronda 715Li
    CROWN TYPE
    Screw down
    DIAL DIAMETER
    31mm
    CASE DIAMETER
    42mm
    CASE DEPTH
    14.8mm
    LUG WIDTH
    22mm
    FIXING TYPE
    2 x 22mm spring bars
    (https://www.nitewatches.com/store/gb/screws-
    pins/pack-of-two-22mm-spring-bars/)
    WEIGHT
    116g Fitted on polymer strap
    182g Fitted on steel bracelet
    WATER RESISTANCE
    300m
    BATTERY LIFE
    10 Years
    Setting the time and date
    Pos. I Position of rest (watch running)
    Pos. II Quick-change correction for date
    Blocking time for the quick-change day correction is from approx. 9.30 pm and
    midnight.
    Unscrew the crown by turning anti-clockwise (watch still running).
    Pull the crown out to position II (watch still running).
    Turn the crown until the current date appears.
    Push the crown back into position I.
    Gently push and screw the crown clockwise to secure it into the case.
    Pos. III Setting the time
    Unscrew the crown by turning anti-clockwise (watch still running).
    Pull the crown out to position III (watch stopped).

Do you have a question about the Nite Alpha-202?

Ask the question you have about the Nite Alpha-202 here simply to other product owners. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Nite Alpha-202 owners to provide you with a good answer.

View here the free Nite Alpha-202 manual. Have you read the manual but does it answer your question? Then ask your question on this page to other Nite Alpha-202 owners.