Muse M-500 BT manual

Muse M-500 BT

On this page you find the Muse M-500 BT manual. Please read the instructions in this operator manual carefully before using the product. If you have any questions about your that are not answered in the manual, please share your question in the troubleshooting section on the buttom of this page.

M-500 BT
M-500 BTW
Wireless portable bluetooth speaker
Please read the instruction carefully
before operating the unit.
GB - 1
GB - 2 GB - 3
1. Indicator light
2. [ Volume -] Previous / volume down button
3. [ POWER] On/off and play/pause button
4. [ Volume +] Next / volume up button
5. Speakers
6. RESET hole
Operated by built-in Lithium battery or DC power.
Charging the speaker
Use the provide USB cable. Connect one end to the speaker and the
other end to a computer or use an adaptor(sold separately) and connect
it to a wall socket. The “ POWER light” should be on.
During charging the red LED will be lit. When charging is complete it
will turn off.
● Please not that the USB cable can only be used for charging and not for
data transfer. USB cable can be used during playback.
NOTE: If you have connected any Bluetooth devices before, press the POWER button (3) for 5
seconds to turn on the speaker. The speaker will reconnect with that device automatically and the
indicator will ash blue quickly, then it becomes steadily lit.
Raising and lowering the volume.
● Press and hold in the volume buttons(2&4) to lower or raise the volume.
An audible signal is emitted once either the highest or lowest volume level is reached.
● Sometimes volume adjustments made on your device will also affect volume output from the speaker.
Changing tracks/songs
To skip to the previous/next songs, press the [ Volume -] or [ Volume +] button to change.
Incoming calls
When you receive an incoming mobile phone, music audio will automatically mute. Once the call has
ended, it depends entirely on you mobile phone whether the current track will return to playback or
Cable connection
To listen to the music using a wired connection, Connect your music device to the audio port using
the included audio cable.
Clean the product by wiping it with a soft dry cloth.
Never use solvent or abrasive cleaning agents.
Turning the speaker on/off
1. Turn ON: Press and hold in POWER button(3) until the indicator begin ashing blue.
2. Turn OFF: Press and hold in POWER button(3) until the indicator turns red.
Establishing a wireless connection
In order to listen to audio from your mobile phone or other bluetooth device, you must rst pair the
devices with each other.
1. Turn off any other devices that are paired with your device.
2. Start the bluetooth function on the device before pairing.
3. If it is the first time you use the speaker system, press and hold the Power button to turn the
system on. After 5s, the status indicator ashes blue with the frequency of 1s. Do not stop pressing
and holding it, one second later, the status indicator will ash blue with frequency of 80 ms.
4. Place the device into bluetooth search mode. The device will begin searching for the speaker.
5. Select M-500BT from the list.
6. Select OK or yes to pair the devices.
7. If needed, use 0000 as the password.
8. The display will remain lit if the pairing is successful.
Problem Solution
The speaker turns
off automatically
Recharge the battery
No connection Make sure the speaker is charged and that audio source is not out
of range of the speaker.
● Make sure that your bluetooth devices are properly paired.
Not functioning
If the speaker is not functioning correctly, you can push the reset
button by inserting a narrow object into the hole on the back of the
speaker. The speaker will be turned off and you can then restart it.
- Never expose the product to re as this could result in personal injury.
- Do not store the product in extremely cold or warm environments.
- Never dismantle the product.
- Never let children play with the product.
- Do not expose the product to dampness or moisture.
Battery type:
Bluetooth version
Operating time
Charging time
Max output
Charging voltage
Working distance:
80 x 80 x76 mm
Approx 150g
850 mAh lithium battery
Up to 5 hors at 60% volume
Approx 2-3 hours
2x1.5 W
Up to 10 meters measured in open space. (Wall and
structures may affect range of device)
USB cable&line-in cable(included)
The socket is only meant for connecting an audio source and not for use as a headphone outlet.
When the cable is successfully connected, the display will be blue.
● The functions(2&3&4) on the speaker will not work with the cable connected. You must control the
functions using the audio source device.
● The speaker volume(2&4) can not be adjusted in this mode.
10, Rue de la Mission, 25480 Ecole Valentin, France
SP-3155 IB MUSE 002 REV1- GB.in1 1 2013-11-13 11:40:54

Do you have a question about the Muse M-500 BT?

If you have a question about the "Muse M-500 BT", don't hesitate to ask. Make sure to describe your problem clearly, this way other users are able to provide you with the correct answer.

Buy related products:

Product specifications

Audio output channels   2.0
Number of speakers   1
Number of drivers   2
Speaker type   -
Amplifier   Built-in
Recommended usage   Universal
RMS rated power   4
Speakers RMS power 4
Frequency range   -
Impedance   -
Ports & interfaces
Connectivity technology Wired & Wireless
Bluetooth version   2.1+EDR
Bluetooth profiles A2DP, AVRCP
USB 2.0 ports quantity   1
AUX in yes
USB charging port yes
Bluetooth   yes
3.5 mm connector yes
Wi-Fi   no
- Bluetooth/3.5 mm
Product colour   Black
Product type  
Other features
Backlight   yes
Power source type   Battery, USB
Battery type   Built-in
Battery life (max)   6
Battery technology   Lithium-Ion (Li-Ion)
Battery recharge time   3
Weight & dimensions
Width   80 mm
Depth   80 mm
Height   75 mm
Weight   150
Packaging content
Cables included Audio (3.5mm), USB