Thank you for purchasing MUJI products.
Please read carefully before using/assembling
Please keep these instructions.
ALARM CLOCK (JAPANESE STATION)
Precautions for BatteryPrecautions for Product
For your own safety, please use the product correctly. Various symbols are displayed here
to prevent both injury to yourself and others around you, as well as property damage.
This symbol is displayed were there is a possibility of serious injury or death.
This symbol is displayed where there is a possibility of injury or property damage.
Make sure to insert the battery in the proper polarity.
±20 sec. per month
Approximately 1 year
Alarm Precision: ±5 min.
Zink Carbon Battery AA/R6P
*Speciﬁcations are subject to change without notice.
Included battery is for sample use and may have a shorter battery life.
Pull and turn the knob to set the time.
Push in the knob after setting.
Setting the Time
Inserting Battery and Setting the Clock
Setting the Alarm
On: Alarm is activated at speciﬁc time.
Off: Deactivate the alarm.
Turning on the Alarm Switch
Push the snooze button while the alarm is activated.
Snooze function can be used for approximately 40 min.
A clock is a precision instrument. Avoid dropping on
the ground or subjecting to any severe shock this
may cause a malfunction.
CHOKING HAZARD-This product contains small parts.
Keep out of reach of children.
This clock can be used stand-alone or mounted.
■ In the case of mounting:
Please check “Advice for mounting the clock.”
■ In the case of stand-alone use:
Please place on a horizontally level surface.
Avoid contact with Battery Acid.
If battery acid enters the eyes or mouth, immediately
rinse your eyes out with clean water and gargle with
cold running water for at least ﬁfteen (15) minutes and
get medical help immediately. If battery acid contacts
skin or clothing, wash immediately with soap and
water. If irritation persists, get medical attention.
Keep out of reach of children.
Keep away from ﬂames, matches, lighters, cigarettes or
other ignition sources.
Do not short-circuit, disassemble, heat or expose to
ﬁre. These actions may result in the leakage of liquid,
heating or an explosion.
Do not place the product in any place where it will be
subjected to direct sunlight or high temperatures, humidity,
dust content, moisture, oil, smoke or gas.
Keep away from ﬁre.
Keep the product away from magnets or magnetized items.
Do not use abrasive cleaning agents such as benzene
or paint thinner to clean the product.
Please wipe off dust or soiling with a soft and dry cloth.
Do not drop the battery or subject it to a large impact.
Do not diassemble the product.
Advice for mounting the clock
Make sure that the clock is securely mounted.
There is the danger that the clock may fall down and cause
injuries or damage to the casing. After conﬁrming the location,
materials and structure of the wall, please select mounting
ﬁxtures that will properly bear the weight of the clock.
* When using mounting ﬁxtures to mount the clock, please check that the
clock is securely mounted by lightly moving it up and down, to the right
and left and forwards.
Do not insert the plus(+) and minus(-) ends of the
battery in reverse.
Use the batteries speciﬁed by the manufacturer.
Remove worn-out batteries from equipment immedi-
ately and dispose of promptly.
Do not attempt to recharge a battery unless the battery
speciﬁcally is marked "rechargeable."
If the battery is not going to be used for more than 2 weeks,
it is recommended that it be removed from the device and
stored in a cool, dry, clean place.
Please make sure to see a plus sign for positive and a
minus sign for negative when installing the batteries.
If the batteries are not used properly, there is the risk of
bodily injury or damage to the clock and its surroundings
due to heating, breakage or the leakage of liquid.
Do not disassemble or modify this may result in a
Set the time for alarm by turning the
pushed knob in counterclockwise direction.