JL Audio M-RBC-1

JL Audio M-RBC-1 manual

(1)
  • M·RBC-1
    WATER-RESISTANT
    REM
    O
    TE
    BASS CONTROL
    Compatible
    with
    JL
    Audio
    amplifiers
    equipped
    with
    "
    Remote
    Bass
    Port
    "
    feature
    ,
    and
    specifically
    designed
    for
    use
    with
    HX
    &
    MHX
    water
    -resi
    stant
    monoblock
    amplifiers
    .
    TO
    AMP
    LIFI
    ER:
    Plugs
    into
    "Remote
    Bass
    Port"
    on
    equipped
    Amplifier
    (
    REFER
    TO AMPLI
    FI
    ER OWNER'S
    MAN
    U
    AL
    )
    Rotate fully
    counter-clockwise
    3/
    8
    "(9mm)
    \
    Mounting
    Hoi\
    .
    @
    ®
    ~
    -
    \
    Use
    12mm Socket I Wrench
    DO
    NOT OVER-TIGHTEN!
    16.4'
    (5
    m)
    Mounting
    surface
    maximum thickness
    2-Year
    Limited
    Warranty
    (U.S.A.)
    I Visit
    www.j
    l
    aud
    1
    o.com
    for
    warranty
    details
    Installation
    Proce
    dur
    e:
    _ 1. Find an appropriate location
    to
    mount
    the
    control
    assemb.
    on
    the
    dash
    or
    console
    of
    the
    vehicle/vessel.
    You
    will need
    access
    to
    the
    rear
    of
    the
    mounting
    panel
    for
    installation.
    The area
    will
    require
    the
    following
    minimum
    and
    maximum
    dimensions:
    Area
    Behind
    Panel
    :
    11fs''
    square x
    W'
    deep (28mm x 28mm x
    19
    mm)
    Mounting
    Panel Thickness:
    lfs''
    (3
    .2mm)
    maximum
    2.
    Drill a
    3
    /a"
    (9mm)
    hole
    in
    the
    center
    of
    the
    mounting
    area.
    3.
    Remove
    the
    knob
    from
    the
    M-RBC-1's
    shaft. Do
    NOT
    remove
    the
    nut
    and washer.
    4.
    Insert
    the
    M-RBC-l's shaft
    through
    the
    drilled
    hole
    from
    behind
    the
    panel and place
    the
    knob
    on
    the
    shaft
    from
    the
    front, pushing
    it
    as
    far
    as
    it
    will
    go.
    5.
    If
    the
    knob does
    not
    fit
    flush
    to
    the
    panel, remove the
    M-RBC
    -1
    and use one
    of
    the
    extra washers
    or
    nuts (or both)
    to
    space
    the
    assembly back
    from
    the panel until the
    knob
    is
    flush. Once
    the
    appropriate shaft-depth
    has
    been achieved, remove
    the
    knob.
    6.
    Place
    the
    remaining
    nut
    and washer on the
    front
    of
    the shaft
    and tighten
    with
    a
    12
    mm
    deep-well socket
    or
    wrench.
    Take
    care
    not
    to
    over-
    tighten
    this nut, especially when attaching the
    M-RBC-1
    to
    a plastic surface.
    7.
    Place
    the
    knob
    on
    the
    shaft
    so
    that
    the
    pointer
    is
    at 7:00
    with
    the
    control
    turned
    fully
    counter-clockwise.
    8.
    Route the control cable
    to
    the
    amplifier and
    connect
    the
    end
    to
    the
    jack labeled "Remote
    Bass
    Control". For use
    with
    HX/
    MHX amplifiers,
    the
    connector includes a
    waterproof
    covering
    to
    pull
    over the amplifier's remote
    jack
    once connected.
    9. Refer
    to
    the Amplifier Owner's Manual
    for
    an
    explanation of
    control
    operation.
JL Audio M-RBC-1

Need help?

Number of questions: 0

Do you have a question about the JL Audio M-RBC-1 or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other JL Audio M-RBC-1 owners to properly answer your question.

View the manual for the JL Audio M-RBC-1 here, for free. This manual comes under the category Remote Controllers and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the JL Audio M-RBC-1 or do you need help? Ask your question here

JL Audio M-RBC-1 specifications

Brand JL Audio
Model M-RBC-1
Product Remote Controller
Language English
Filetype PDF

Related product manuals

Remote Controller JL Audio

Frequently Asked Questions

Below, you will find the most frequently asked questions about the JL Audio M-RBC-1.

Is your question not listed? Ask your question here

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

Read more