Huawei WS320 manual

On this page you find the Huawei WS320 manual. Please read the instructions in this operator manual carefully before using the product.If you have any questions about your Wifi repeater that are not answered in the manual, please share your question in the troubleshooting section on the buttom of this page.

Do you have a question about the Huawei WS320?

If you have a question about the "Huawei WS320", don't hesitate to ask. Make sure to describe your problem clearly, this way other users are able to provide you with the correct answer.

hiI just change my wireless router and my repeater signal turn to yellow blinking.( it is working good before )I have reset the repeater trough the small hole.From my laptop , I can see the signal from the repeater but when I tried to configure the repeater using the IP address as provided , it was fail to connect.I have follow your instruction even from you tube.need advice.

, 1 year ago

Am trying to reconnect Huawei WS320 to my network - requests "preshared key"- when I enter network password it won't accept it.

, 1 year ago

Need to reset it and work it as a repeater

, 3 years ago

Huawei repeater not turning in to yellow color once i plug it, only red color even i try to reset the small hole on the top. Please help

, 4 years ago

nhbhk;bj

, 4 years ago

Product specifications

Antenna
Antenna type Built-in
Wireless LAN features
Frequency band 2.4 - 2.4835
Security
Security algorithms 128-bit WEP, 64-bit WEP, WPA-PSK, WPA2-PSK
Power
Power consumption (typical) 5
Power requirements100-240VAC, 50/60Hz
Features
LED indicatorsyes
Operational conditions
Operating temperature (T-T) 0 - 40
Operating relative humidity (H-H)5 - 95
Weight & dimensions
Dimensions (WxDxH) 42 x 76 x 69mm
Weight 66
Data transmission
Data transfer rate (max) 135Mbit/s