Honeywell H4D3PRV2

Honeywell H4D3PRV2 manual

(1)
  • H4D3PRV2
    True Day/Night Rugged Indoor/Outdoor
    IR Minidome IP Camera
    Regulatory Statements
    Information to the User: This equipment has been tested and found to comply with the limits for a
    Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
    reasonable protection against harmful interference in a residential installation. This equipment
    generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
    with the instructions, may cause harmful interference to radio communications. However, there is no
    guarantee that interference will not occur in a particular installation.
    Quick Installation Guide
    Document 800-21231V1Rev A– 10/2015
    Thank you for purchasing a H4D3PRV2 camera.
    Follow the
    instructions in this guide to install and
    log on to
    your camera. For instructions on
    configuring the
    camera, refer to the Performance
    Series IP
    Cameras User Guide on the software
    and
    documentation CD that came with your
    camera. If
    you require additional assistance,
    please call the
    number shown below.
    If this equipment does cause harmful interference to radio or television reception, which can be
    determined by turning the equipment off and on, the user is encouraged to try to correct the
    interference by one or more of the following measures:
    Reorient or relocate the receiving antenna.
    Increase the separation between the equipment and receiver.
    Connect the equipment into an outlet on a circuit different from that to which the receiver is
    connected.
    Consult the dealer or an experienced radio/TV technician for help.
    Cautions and Warnings
    Note Changes or modifications not expressly approved by the party responsible for compliance
    could void the user’s authority to operate the equipment.
    This Class B digital apparatus complies with Canadian ICES-003.
    Cet appareil numérique de la Classe B est conforme à la norme NMB-003 du Canada.
    Important Safeguards
    WARNING
    Read and keep these instructions.
    Do not aim the camera toward a bright light source for extended periods to prevent damage to
    the imager. Avoid operating the unit under or close to unstable light sources (may cause
    flickering), or close to fluorescent lamps or objects reflecting light.
    Do not touch the camera lens.
    Do not drop the camera or subject it to physical shock.
    Do not use a strong or abrasive detergent when cleaning the camera.
    Avoid operating or storing the unit in extremely humid, dusty, hot/cold environments, where the
    operating temperature is outside the recommended range of F to 140°F (–20°C to 60°C).
    To ensure compliance with electrical safety standards this product is
    intended for use with a Listed Power Adapter marked with “Limited Power Source”, “LPS”,
    on the unit, output rated 12 V DC, minimum 0.33A, Tma=60Deg.C or from Power over
    Ethernet (PoE) provided by Listed Information Technology Equipment meeting the IEEE
    802.3af PoE standard.
    The Ethernet connection is not intended to be connected to exposed (outside plant)
    networks. Do not connect two power sources to the camera at the same time.
    CAUTION
    Invisible LED radiation (850 nm). Avoid exposure to beam.
    Note
    Do not apply power to the camera before completing installation.
    Note
    Confirm the installation surface can support at least three times the weight of the camera.
    Document 800-21231V1Rev A– 10/2015
    1
    CAUTION
    THIS SYMBOL INDICATES THAT
    DANGEROUS VOLTAGE
    CONSTITUTING A RISK OF
    ELECTRIC SHOCK IS PRESENT
    WITHIN THE UNIT.
    CAUTION: TO REDUCE THE RISK OF ELECTRIC
    SHOCK, DO NOT REMOVE THE COVER.
    NO USER-SERVICEABLE PARTS INSIDE.
    REFER SERVICING TO QUALIFIED SERVICE
    PERSONNEL.
    THIS SYMBOL INDICATES THAT
    IMPORTANT OPERATING AND
    MAINTENANCE INSTRUCTIONS
    ACCOMPANY THIS UNIT.
    RISK OF ELECTRIC
    SHOCK
    DO NOT OPEN
Honeywell H4D3PRV2

Need help?

Number of questions: 0

Do you have a question about the Honeywell H4D3PRV2 or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Honeywell H4D3PRV2 owners to properly answer your question.

View the manual for the Honeywell H4D3PRV2 here, for free. This manual comes under the category Security cameras and has been rated by 1 people with an average of a 5.1. This manual is available in the following languages: English. Do you have a question about the Honeywell H4D3PRV2 or do you need help? Ask your question here

Honeywell H4D3PRV2 specifications

General
Brand Honeywell
Model H4D3PRV2
Product Security camera
Language English
Filetype PDF
Performance
Type IP security camera
Day/night mode
Remote viewing
Plug and Play
Infrared (IR) cut-off filter
Certification FCC
Placement supported Indoor & outdoor
Connectivity technology Wired
Video
Full HD
Total megapixels 3
Supported video modes 720p, 1080p
3D NR (Noise Reduction)
Video compression formats H.264, M-JPEG
Smart IR
Back Light Compensation (BLC)
Highlight Compensation (HLC)
Digital Wide Dynamic Range (DWDR)
Gain control type Auto/Manual
Privacy masking
Maximum resolution 2304 x 1296
Supported graphics resolutions 352 x 240, 704 x 480, 1280 x 720 (HD 720), 1920 x 1080 (HD 1080), 2304 x 1296
Frame rate 30
Bit rate 4 - 8192 kbps
Night vision
Night vision
Night vision distance 30
LED type IR
Design
Protection features Waterproof
International Protection (IP) code IP66
Form factor Dome
Product colour Black, White
Mounting type Wall
Lens system
Focal length range 2.7 - 12mm
Focus Motorized
Zoom capability
Maximum aperture number 1.4
Auto focus
null
System requirements
Mobile operating systems supported Android, iOS
Security
Motion sensor
HTTPS encryption
Security algorithms 802.1x RADIUS
IP address filtering
Power
Power over Ethernet (PoE)
Power source type PoE
DC output voltage 12
Power consumption (max) 8.5
Storage
Built-in HDD -
Compatible memory cards MicroSDHC
Maximum memory card size 128GB
Card reader integrated
Image sensor
Sensor type CMOS
Optical sensor size 1/3 2011-05-04 11:27:54 2012-06-08 13:40:02 12 28 1 RPM 0000-00-00 00:00:00 2012-06-08 13:40:02 14 30 1 M 0000-00-00 00:00:00 2012-06-08 13:40:02 15 31 1 kHz 0000-00-00 00:00:00 2012-06-08 13:40:02 16 32 1 ° 0000-00-00 00:00:00 2012-06-08 13:40:02 17 33 1 x
Number of effective pixels (H x V) 2304 x 1296
Camera
Camera shutter type Electronic
Camera shutter speed 1/100000
Minimum illumination 0.1
White balance Auto, Manual
Viewing angle, horizontal 86
Network
Ethernet LAN
Wi-Fi
Bluetooth
Cabling technology 10/100Base-T(X)
Quality of Service (QoS) support
Number of users 20
Networking standards IEEE 802.3af
Ports & interfaces
Ethernet LAN (RJ-45) ports 1
Operational conditions
Operating temperature (T-T) -30 - 60
Operating relative humidity (H-H) 10 - 100
Weight & dimensions
Depth 122mm
Height 89mm
Weight 500
Audio
Signal-to-Noise Ratio (SNR) 50
Packaging content
Number of cameras 1

Frequently Asked Questions

Below, you will find the most frequently asked questions about the Honeywell H4D3PRV2.

Is your question not listed? Ask your question here

ManualSearcher.com

Looking for a manual? ManualSearcher.com ensures that you will find the manual you are looking for in no time. Our database contains more than 1 million PDF manuals from more than 10,000 brands. Every day we add the latest manuals so that you will always find the product you are looking for. It's very simple: just type the brand name and the type of product in the search bar and you can instantly view the manual of your choice online for free.

ManualSearcher.com

© Copyright 2020 ManualSearcher.com. All Rights Reserved.

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

Read more