The Setup Wizard is displayed on the screen when you turn on your LCD TV for the first time.
Note: Use the ,to move through the menu. Press OK to select.
1. Select the Language for the
on-screen display (OSD).
2. Select the TV mode.
3. Select the Country.
4. Press OK for channel scan.
5. The channel scan may
take a while to complete.
6. Press Menu when channel
scan is completed.
You can watch cable or broadcast TV,
play DVD or connect to your PC. To display the
Input Source menu, press the INPUT button
on the remote control or the
INPUT button on the LCD TV.
To select the source signal:
Press the numeric buttons
on the remote control; Or
Press the , buttons
to move, then press OK to
Selecting Your Content Source
Press the PS or PT button on
the remote control or the LCD TV to
increase / decrease the program
Press the numeric buttons on the
Please select OSD language:
Please select TV mode:
Please select country:
Now please do channel scan:
Now please do channel scan:
Digital channels found:0
Analog signals found:0
Initialized finished !
Remote IR Sensor/
(For service only)
2. Carefully place the TV face down on a soft and flat surface (blanket,foam,cloth,etc) to prevent
and damage to the TV.
3. Press the stand lock on both sides,
insert the stand into the holes.
Earphone line out
PC Audio Input
VGA Input (PC)
Note: the sleeves are for design only and the TV cannot be carried by it.
Assembling the stem & stand base
1. Insert the stem into slot then turn 45 degrees clockwise
to complete installation.
4. If want to dissembling the stand,
press the stand lock on both
sides, remove the stand from
back cover of TV.
Number of questions: 1
Do you have a question about the Hannspree ST 28F Apple or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Hannspree ST 28F Apple owners to properly answer your question.
About the Hannspree ST 28F Apple
View the manual for the Hannspree ST 28F Apple here, for free. This manual comes under the category LCD TVs and has been rated by 1 people with an average of a 8.5. This manual is available in the following languages: English. Do you have a question about the Hannspree ST 28F Apple or do you need help? Ask your question here
Below, you will find the most frequently asked questions about the Hannspree ST 28F Apple.
What's the best viewing distance for my Hannspree television?
The ideal viewing distance for your Hannspree television depends on the screen size. As a rule of thumb you can assume that approximately 2.4 times the screen diagonal is the ideal viewing distance.
My television has no signal anymore, now what?
If your television has no signal, you can check the following: - Check whether your television is set to the correct source. - Check if your TV receiver is properly connected via the HDMI or SCART input.
What screen dimensions does my LCD TV have?
The size of your LCD TV is usually expressed in inches, 1 inch is 2.54 centimetres. The size is the diagonal size of your LCD TV, so you measure the screen from bottom left to top right.
What is HDMI?
HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.