The main power supply is engaged when the main plug is
plugged in a 220-240 V~, 50 Hz AC outlet. To operate the
unit, press [Q(standby-on)] to turn on the unit.
WARNING:LIVE PARTS INSIDE.
DO NOT REMOVE ANY SCREWS.
1)Do not attempt to open the cabinet. There are no user
serviceable parts inside. Refer all servicing to qualified
2)Slots and openings in the cabinet and the sides or
bottom are provided for ventilation. To ensure reliable
operation and to protect the unit from overheating, these
openings must not be blocked or covered.
Avoid installation in enclosed spaces such as bookcases
unless proper ventilation is provided.
3)Keep the unit away from radiators and other heat
4)Do not push objects of any kind into the unit through
the cabinet slots or openings as they could touch
electrically live parts or short circuit parts resulting in a
fire or electric shock.
5)To prevent fire or shock hazard, do not expose this unit
to dripping or splashing, no objects filled with liquids,
such as vases, should be placed on the unit.
6)Use the unit on a horizontal (flat) surface only.
7)Do not place any combustible objects on the unit
8)The LCD panel used in this product is made of glass.
Therefore, it can break when the product is dropped or
applied with impact. Be careful not to be injured by
broken glass pieces in case the LCD panel breaks.
The LCD panel is a very high technology product with
921,600 thin film transistors, giving you fine picture
details. Occasionally, a few non-active pixels may appear
on the TV screen as a fixed point of blue, green or red.
Please note that this does not affect the performance of
9)Disconnect the mains plug to switch off when the unit
becomes faulty or not in use.
10)The mains plug shall remain readily operable.
11)Read the manual instructions to ensure correct and safe
installation and interconnection of the unit in
12)Keep a distance of 20 cm around the ventilation
openings of the unit.
13)Batteries (battery pack or batteries installed) shall not be
exposed to excessive heat such as sunshine, fire or the
To aid reporting in case of loss or theft, please record the unit’s
model and serial numbers in the space provided. The numbers
are located at the rear of the unit.
Model number: _________________
Serial number : _________________
To prevent the spread of
fire, keep candles or
other open flames away
from this product at all
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPARATUS TO RAIN OR MOISTURE.
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the apparatus’s
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the apparatus.
Do not place the unit on the furniture that is capable of
being tilted by a child or an adult leaning, pulling, standing
or climbing on it. A falling unit can cause serious injury or
Number of questions: 0
Do you have a question about the Funai LT8-M26BB or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Funai LT8-M26BB owners to properly answer your question.
About the Funai LT8-M26BB
View the manual for the Funai LT8-M26BB here, for free. This manual comes under the category LCD TVs and has been rated by 1 people with an average of a 5.9. This manual is available in the following languages: English. Do you have a question about the Funai LT8-M26BB or do you need help? Ask your question here
Below, you will find the most frequently asked questions about the Funai LT8-M26BB.
What's the best viewing distance for my Funai television?
The ideal viewing distance for your Funai television depends on the screen size. As a rule of thumb you can assume that approximately 2.4 times the screen diagonal is the ideal viewing distance.
My television has no signal anymore, now what?
If your television has no signal, you can check the following: - Check whether your television is set to the correct source. - Check if your TV receiver is properly connected via the HDMI or SCART input.
What screen dimensions does my LCD TV have?
The size of your LCD TV is usually expressed in inches, 1 inch is 2.54 centimetres. The size is the diagonal size of your LCD TV, so you measure the screen from bottom left to top right.
What is HDMI?
HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.