Fantec DB-AluSky U3e manual

Fantec DB-AluSky U3e

On this page you find the Fantec DB-AluSky U3e manual. Please read the instructions in this operator manual carefully before using the product. If you have any questions about your that are not answered in the manual, please share your question in the troubleshooting section on the buttom of this page.

Brand
Fantec
Model
DB-AluSky U3e
Product
EAN
4250273477016, 4250273477030, 4250273477047
Language
English, German, French
Filetype
PDF
FANTEC DB-AluSky U3e
3.5Aluminum enclosure
USER MANUAL
.
3,5” Aluminium Gehäuse
Benutzerhandbuch
Packungsinhalt: FANTEC DB-AluSky U3e, USB Kabel 3.0, eSata Kabel,
Anleitung,
Schrauben, Standfuß, Netzteil, Festplattenbefestigung,
G
ummifüße
Einbauanleitung
Schritt1: Öffnen Sie das Gehäuse.
Ziehen Sie den Festplattenkäfig
aus dem Gehäuse raus.
Schritt 2: Legen Sie die Festplatte auf
die Führungsschienen und schieben
Sie diese in Richtung der Platine bis
der SATA-Stecker der Festplatte fest
mit der SATA-Buchse verbunden ist.
Schritt 3: Verschrauben Sie die
Festplatte mit dem Gehäuse oder
benutzen Sie die
Festplattenbefestigungsschiene.
Sch
ritt 4: Schließen Sie das
Gehäuse und verschrauben Sie die
Rückblende.
Der Festplatteneinbau
ist abgeschlossen.
R
3.5 boîtier aluminium
MANUEL DE L'UTILISATEU
Contenu de l'emballage: FANTEC DB-AluSky U3e, câble USB 3.0, eSata câble,
manuel,
support, vis, adaptateur d'alimentation,
disque dur de fixation Pad,
les pieds en caoutchouc
Guide d'installation du matériel
ETAPE 1 : Ouvrez le boîtier.
Vous pourrez observer la
structure interne du boîtier.
ETAPE 2 : Poussez le disque dur
vers la carte électronique et vérifiez
que le connecteur SATA est
correctement branché.
ETAPE 3 :
sur le plateau ou bien utiliser le
disque dur de fixation Pad.
Visser le disque dur
ETAPE 4 : Revissez le c ouvercle
arrière.
L 'o p é ra tio n
d 'a s s e m b la g e e s t t e rm i n é e
.
Package contents: FANTEC DB-AluSky U3e, USB Cable 3.0, eSata Cable,
Manual,
Stand, Screws, Power Adapter, HDD fixing Pad, Rubber feet
Hardware Installation Guide
STEP1: Open the enclosure.
You will see the internal
tructure of the enclosure.
STEP2: Push the HDD to wards
the electronic board and make
sure the SATA connector is well
connected.
STEP3: Screw the HDD on the
ray tightly or use the HDD
xing Pad.
STEP4:Close the enclosure and
screw the rear cover back.
The assembling process
is now accomplished.
S
fi
FANTEC DB-AluSky U3eFANTEC DB-AluSky U3e

Do you have a question about the Fantec DB-AluSky U3e?

If you have a question about the "Fantec DB-AluSky U3e", don't hesitate to ask. Make sure to describe your problem clearly, this way other users are able to provide you with the correct answer.

Buy related products:

Product specifications

Hard drive
HDD capacity   3000 GB
HDD speed   -
HDD size   3.5 2011-05-04 11:27:54 2012-06-08 13:40:02 12 28 1 RPM 0000-00-00 00:00:00 2012-06-08 13:40:02 14 30 1 M 0000-00-00 00:00:00 2012-06-08 13:40:02 15 31 1 kHz 0000-00-00 00:00:00 2012-06-08 13:40:02 16 32 1 ° 0000-00-00 00:00:00 2012-06-08 13:40:02 17 33 1 x
Storage drive buffer size -
Type   HDD
Ports & interfaces
Maximum data transfer rate   5000 Mbit/s
USB data transfer rates 5000 Mbit/s
eSATA data transfer rates 3
USB version   3.0 (3.1 Gen 1)
eSATA yes
USB connector USB Type-B
Power
Bus powered no
AC adapter input voltage 100-240
AC adapter frequency 50 - 60
External power adapter yes
Features
Windows operating systems supported   yes
Mac operating systems supported   yes
Linux operating systems supported   yes
Product colour   Black
LED indicators yes
Housing material Aluminium, Metal, Plastic
Weight & dimensions
Width   120 mm
Depth   192 mm
Height   32 mm
Weight   1000
Packaging data
Cables included eSATA, USB
Warranty card yes
User guide yes
Other features
Connectivity technology Wired