Edifier If360 manual

Edifier If360

On this page you find the Edifier If360 manual. Please read the instructions in this operator manual carefully before using the product. If you have any questions about your that are not answered in the manual, please share your question in the troubleshooting section on the buttom of this page.

Brand
Edifier
Model
If360
Product
EAN
6923520261710
Language
English
Filetype
PDF
Alarm setting
Press twice the ALARM TIME button on the remote control. The display will show ALARM SETTINGS.
Press the “ SELECT ” button on the remote control. The “ON” or “OFF” display with blink. Press either the “ ” to switch ON
the alarm or the “ ” to switch the alarm OFF.
Press the “ SELECT ” button a second time on the remote control and the HOUR display will blink. Press the “ ” to increase
the hour setting. Press the “ ” to decrease the hour setting.
Press the “ SELECT ” button a third time on the remote control and the MINUTE display will blink. Press the “ ” to increase
the minute setting. Press the “ ” to decrease the minute setting.
Press the “ SELECT ” button a fourth time on the remote control and the WAKE UP mode will blink. Press the “ ” to change
mode from FM or CD, iPod or SD/USB functions. Note that if an iPod is not inserted into the dock or if not SD/USB card has
been inserted into the rear slots, or no CD has been inserted in the system, then the system will not allow selection of these
wake up modes and will default to FM mode for wake up.
Press the “ SELECT ” button a fifth time on the remote control and the wake up volume can be selected. Press the “ ” to
increase the volume setting. Press the “ ” to decrease the volume setting.
When all adjustments have been made, press SELECT one more time to revert to the original display.
Clock setting
Press the “ ALARM TIME ” button on the remote control and the display will show “ CLOCK SETTINGS ”.
Press the “ SELECT ” button on the remote control and the hour display will blink. Press the “ ” to increase the hour
setting. Press the “ ” to decrease the hour setting.
Press the “ SELECT ” button a second time on the remote control and the minute display will blink. Press the “ ” to
increase the minute setting. Press the “ ” to decrease the minute setting.
Press the “ SELECT ” button a third time on the remote control and the month display will blink. Press the “ ” to increase
the month setting. Press the “ ” to decrease the month setting.
Press the “ SELECT ” button a fourth time on the remote control and the date display will blink. Press the “ ” to increase
the date setting. Press the “ ” to decrease the date setting.
Press the “ SELECT ” button a fifth time on the remote control and the year display will blink. Press the “ ” to increase the
year setting. Press the “ ” to decrease the year setting.
When all the adjustments have been made, press the “ SELECT ” button once more to revert to original display.
Snooze
The alarm will sound according to the time set prior on the clock, and it will ring for 1 minute while the ALARM TIME will blink repeatedly.
If no interruptions are made, the system will go into SNOOZE mode after 1 minute.
The alarm will sound for 1 minute after a 10-minute interval before it goes into snooze mode for another 10 minutes. When the alarm is
triggered for the third time, and the user does not stop the alarm, the system will go into STBY mode automatically.
During the three cycles at 10 minute intervals, the user can switch off the alarm by pressing and holding the TIME SETTING button on the
remote.
2
English
Box content
Box content
1
English
Important safety instruction
4
English
Powering on
3
English
Product illustration and functional description
6
English
5
English
Illustration and functional description of control buttons
Illustration and functional description of control buttons
8
English
7
English
How to use the remote control
How to use the remote control
How to use the remote control
10
English
9
English
Listening to the FM radio
12
English
14
English
11
English
Clock setting and alarm setting Clock setting and alarm setting
13
English
Specifications
a. iF360-Home Music Centre
b. Remote control
c. Power cord
d. Wire antenna
e. 9 pcs dock adapter for iPod/iPhone
f. 3.5mm~dual RCA audio connecting cable
g. User manual
iF360-Home Music Centre
1
2
3 3
16 17 18 19
20
21
4
5
6
7
13
14
14
15
8
11
12
10
9
1. CD slot
2. Digital display panel
3. Speaker grill
4. CD eject button
5. Bass & Treble knobs
6. Previous track/station select button
7. Rotary touch-sense volume control
8. Play/Pause button
9. Next track/station select button
10. Stop/Search button
11. Input selection button
12. iPod dock
13. iPod dock cover
14. Ventilation slots
15. FM wire antenna jack connector
16. USB port
17. SD card port
18. Video-out jack
19. RCS R/L input jacks
20. Power cord receptacle
21. Power on/off switch
Front view
Rear view
With the power cord plugged into the rear power receptacle and also plugged into the main power
socket, turn the power on/off switch to the ‘on’ position. The unit will power on and the display panel
will be illuminated. Press the play / pause button “ ” to activate the system.
The iF360 Home Music Centre has been designed for audio playback from 6 different audio sources:
iPod: Lift up the iPod dock cover and insert
CD:
Insert CD into the CD slot located below the display panel
FM:
Connect wire antenna (supplied) to rear antenna jack for optimum FM sensitivity
SD Card: Plays recorded MP3 and WMA audio files
USB:
Plays recorded MP3 and WMA audio files
Aux-in:
Connects to an external source via dual RCA/3.5mm connector cable (supplied)
The iF360 Home Music Centre also provides a video-out connection.
An extension cable (not supplied) can be connected between a television/display and the
iF360 Home Music Centre to enable for iPod video or movies to be viewed on the television/display.
Full iPod navigation is possible either via the remote control or from the unit itself.
Touch to switch between USB - SD - AUX Input - iPod - FM - CD
Touch to start auto FM search
Touch to stop iPod player
Touch to stop CD player Note - the display panel will show the track played and CD capacity
Touch to stop SD card music Note - the display panel will show the track played and card capacity
Touch to stop USB music Note - the display panel will show the track played and card capacity
Touch to select next track when using iPod, CD, USB, SD card, or when in FM mode to select higher frequency
channel. Note - when FM auto seek is done, touch to select among 9 preset FM stations; press and hold to
retrieve the original function of higher frequency channel selection.
FUNC: Touch to adjust Bass or Treble using the circular “touch-sense” volume control
Touch to select previous track when using iPod, CD, USB, SD card, or when in FM mode to select lower frequency
channel. Note - when FM auto seek is done, touch to select among 9 preset FM stations; press and hold to retrieve
the original function of lower frequency channel selection.
Press once to activate the system after power has been connected and rear master switch has been turned
to ‘on’ position.
The Play / Pause button can be selected when in iPod, CD, USB, SD input function.
Press the Play / Pause button to re-activate the system and the system will resume play form the last
input / audio source.
Eject key: Touch to eject CD
The remote control will operate within a distance of 7m from the iF360 Home Music Centre.
Pressing any button on the remote control will illuminate the red LED built in the control itself.
Always point the remote in the direction to the front of the iF360 Home Music Centre.
1. “ ” Power on/Standby
2. “ ” MUTE
Press once to mute. Press again to cancel mute.
3. “ ” – Eject key
Press to eject the CD disc.
4. Numeric keys ‘0-9’
a. While in CD, SD or USB input mode
Pressing any numeric key will select the corresponding track number. Pressing the “ SELECT ” button
will immediately play the selected track. If the “ SELECT ” button is not selected then the track will
automatically play after a 5-second pause.
b. To store an FM station,
First tune to the required radio station using the frequency up “ ” or frequency down “ ” buttons.
Once a station has been selected, press and down hold a numeric ‘0-9’ key for approx. 2 seconds to
assign the selected station to that numeric key.
5. Input selection buttons:
FM Button:
Press to select FM radio
USB Button:
Press to select USB MP3 or WMA formatted audio
iPod Button:
Press to select iPod audio
CD Button:
Press to select CD audio
SD Button:
Press to select SD MP3 or WMA formatted audio
Aux Button:
Press to select AUX input audio from an external source such as MP3
player / external CD player / PC soundcard
6. “ ”
FM Mode:
Allows the FM radio to be manually tuned to a lower frequency in steps of 0.1MHz per operation. If held continuously down, the FM radio frequency
will scroll until the button is released. Press and hold for continuous frequency changing.
CD Mode:
No function
USB / SD Mode:
Press to go to the previous folder.
iPod Mode:
Press once to navigate and scroll down the iPod menu for single selection or press continuously to navigate and scroll down the iPod menu in quick succession.
AUX Mode:
No function
7. “ ”
Allows the FM radio to be manually tuned to a higher frequency in steps of 0.1MHz per operation. If held continuously down the FM radio frequency
will scroll up until the button is released.
CD Mode:
No function
USB / SD Mode:
Press to go to the next folder.
iPod Mode:
Press once to navigate and scroll up the iPod menu for single selection or press continuously to navigate and scroll up the iPod menu in quick succession.
Aux Mode:
No function
8. Navigation pad:
When in FM mode, pressing MENU button twice will enter region selection interface, then press SELECT button to switch between the frequency bandwidths
of different regions. In sequence: China, Europe, United States and Japan (China, Europe and the US frequency bandwidth is 87.5MHz - 108MHz, Japan
frequency bandwidth is 76.00MHz - 90MHz). Once the area of operation has been chosen, press MENU again to lock in the operating frequency of the
region selected.
When in CD mode,press the MENU button to review track name, artist’s name and album title. Note that information displayed is subject to source material
and encoding at recording of this information. Note that information displayed is subject to source material and encoding at recording of this information.
When in USB or SD mode and playing from an MP3 or WMA format audio source, press the MENU button to review title, artist’s name and
album title. Note that information displayed is subject to source material and encoding at recording of this information.
When in iPod mode, pressing the MENU button will change the iPod sub-menus – Playlist; Artist; Songs; Videos and More.
Note:
1. Only the available audio source can be set to alarm, note that if the selected alarm source is found removed, the system will default to iPod
mode for wake up; if iPod is still not found, the 1st preset station would be set to default alarm source.
2. USB/SD/CD signal can be set to alarm source only when they are successfully recognized by the system.
3. After the original alarm source is removed, the 1st preset FM station would automatically replace the original one as a default alarm source.
To reset the system
• Press the MUTE key on the remote control in any mode to mute the system
• When the system is muted, press and hold the MENU key to enter system reset interface, where firmware version is shown.
• Then press SELECT on the remote control to execute system reset.
Screensaver
• If there is no action in 4 minutes, the display panel will dim.
• 1 minute more and the screensaver will be activated.
• You can only see the current signal source, system volume and alarm on/off information shown in dim light on the display
panel when the screensaver is activated.
• To activate the display panel again, touch any keys on the system or the remote control.
Total power output: RMS 30W x 2 (THD + N =10%, f0=1kHz)
Signal to noise ratio: 80 dB(A) (THD + N =1%)
Distortion: 0.5%
Frequency response: 52Hz~20kHz
Input sensitivity: 750 mV ± 50 mV
Input type: iPod / iPhone / SD / USB / AUX / CD / FM
Adjustment: Adjusted by both the on-deck touch sense
keys and the remote controller
Speaker unit: 3 inch (78mm), magnetically shielded, 6Ω
System dimension: 390 x 145 x 237 mm (W x H x D)
Net weight: Approx 4.7kg
Gross weight: Approx 6.0kg
Troubleshooting
FM radio operation
Selecting region-specific frequencies
The iF360 Home Music Centre may require tuning for the the FM radio to operate.
Switch on the system and select FM radio on the remote control. Press the MENU button twice, and then press the "SELECT"
button in succession to select the region you require (namely, China, Europe, United States and Japan). When your preferred
region appears, press the "MENU" button to complete the operation.
Press the “ MENU” button once and "Start Auto Seek?" appears on the screen, then press the “ SELECT ” button to enable the
system to auto search and preset. There is a total of 9 channels for each region.
Once the display has switched back, the radio is ready to play.
How to tune the FM radio
The radio will seek a radio station by pressing the “ ” or “ ” button on the remote control to a higher or lower frequency.
Pressing and holding a numeric button will assign the radio station against the numeric key (preset) selected.
A total of 9 preset stations is available for each region. Presets can be re-selected and reassigned as required. Pressing the
“ / ” button on the remote control allows manual selection of a radio station / radio frequency. Pressing and holding a numeric
button will assign the radio station against the numeric key (preset) selected. Presets can be re-selected and reassigned as required.
The iF360 Home Music Centre can automatically select 9 presets (each region). Press the MENU button once and then the SELECT
button for the radio function to self select 9 radio stations. Presets can be re-selected and reassigned as required by selecting the
preferred radio frequency, then pressing and holding down for 2 seconds, a numeric (1-9) button on the remote control.
Preset index
Signal source
Signal strength
Frequency value
Alarm on
Date
Signal source
Current time
Current time
Date
Clock setting interface
Alarm on/off
Alarm time
Alarm volume
Alarm audio source
Alarm setting interface
Alarm time (blinking)
Alarm source Snooze
Current time
Bonus functions
Remote control
3.5mm to dual RCA connecting cable
Wire antenna
Power cord
User manual
Dock adapter for iPod/iPhone
When in FM mode, pressing the “ ” button will seek a higher radio frequency. Note - when FM auto seek is done, touch to select among 9 preset
FM stations; press and hold to retrieve the original function of higher frequency channel selection.
When in CD mode, pressing the “ ” button will seek the beginning of the next track. Press and hold for fast track forward
When in USB / SD mode, pressing the “ ” button will seek the beginning of the next track.
When in iPod mode, pressing the “ ” button will seek the beginning of the next track.
When in FM mode, press the “MENU” button once for auto seek function. Pressing the “SELECT” button enables the system to auto search
and presets 9 channels. The preset channels can be accessed by numeric remote control keypad. Note that any selected radio station can
be assigned a preset. To select station manually, tune to the desired radio station and then hold down a numeric key for approx. 2 seconds to
automatically preset the desired radio station to that numeric key.
When in iPod mode, pressing the “ SELECT ” button enters the next sub-level of the iPod menu.
When in CD mode, pressing the “ ” button will play or pause the music selected.
When in USB / SD mode, pressing the “ ” button will play or pause the music selected.
When in iPod mode, pressing the “ ” button will play or pause the music selected.
9. Treble+/-: Press ‘Treb +’ or ‘Treb -’ to adjust treble frequency up or down to suit user preference.
10. Bass+/-: Press ‘Bass +’ or ‘Bass -’ to adjust bass frequency up or down to suit user preference.
11. Vol+/Vol-: press ‘Vol +’ or ‘Vol -’ to control the volume.
12. RPT: Press ‘Rpt’ repeatedly to switch between three track repeat modes - Normal/Play; Track Repeat and Disc Repeat.
If no selection is made within 8 seconds, the system reverts back to original settings.
13. ALARM TIME: Press ‘ALARM TIME’ once to enter clock setting mode. Press again to enter alarm setting mode. Press again to revert to original display.
14. SHFL: Press ‘SHFL’ when the unit is in ‘Normal/Play’ or ‘Disc Repeat’. One press of the button turns on the shuffle function.
Press again to turn off the shuffle function.
15. ESC: Press ‘ESC’ to return to normal operation of system.
Note: in the USB / SD mode, running time of the VBR encoded MP3 and WMA files might
go inaccurate after fast forward / fast rewind operations.
When in FM mode, pressing the “ ” button will seek a lower radio frequency. Note - when FM auto seek is done, touch to select among 9 preset
FM stations; press and hold to retrieve the original function of lower frequency channel selection.
When in CD mode, pressing the “ ” button will seek the beginning of the track being played or the previous track. Press and hold for fast track rewind
When in USB/SD mode, pressing the “ ” button will seek the beginning of the track being played or the previous track.
When in iPod mode, pressing the “ ” button will seek the beginning of the track being played or the previous track.
Normal FM interface
Screen saver interface
Maunal Edition 1.0,Dec.2010
IB-200-M03600-05
Products of Edifier will be customized for different applications. Pictures and illustrations shown on this
manual may be slightly different from actual product. If any difference is found, the actual product prevails.
NOTICE:
For the need of technical improvement and system upgrade,information contained herein may be subject to
change from time to time without prior notice.
Printed in China
www.edifier-international.com
2010 Edifier International Limited. All rights reserved.
User manual
User manual | Manuel d’utilisateur | Manual de usuario | Bedienungsanleitung | Manuale dell’utente

Do you have a question about the Edifier If360?

If you have a question about the "Edifier If360", don't hesitate to ask. Make sure to describe your problem clearly, this way other users are able to provide you with the correct answer.

Buy related products:

Product specifications

Audio
Audio output channels   2.0
RMS rated power   60
Frequency range   52 - 20000
Signal-to-Noise Ratio (SNR)   80
Ports & interfaces
Headphone connectivity   -
Bluetooth   no
AUX in yes
Composite video in   1
Composite video out   1
DC-in jack   yes
USB 2.0 ports quantity   1
Radio
FM radio   yes
Performance
Apple docking compatibility   iPhone, iPod
Bass reflex   yes
Alarm clock yes
Snooze function   yes
Equalizer   -
Compatible memory cards   SD
Power
Built-in charger   yes
Power source type   AC
Design
Volume control Rotary
Product colour   Black
Packaging content
Handheld remote control   yes
AC adapter included yes
Other features
Compatible products   iPod / iPhone
Display
Display   VFD
- -
Weight & dimensions
Width   390 mm
Depth   237 mm
Height   145 mm
Weight   4700
Package weight   6000

Related products: