This Product is backed a One Year Limited Warranty.
For complete warranty information visit www.edgetechcorp.com/register
1” Mini Hard Drive
327 East 14th Street / Ada OK 74820 (800) 332-6581 / (580) 332-6581 / www.edgetechcorp.com
are trademarks of EDGE Tech Corp. Trademarked words or logos used herein are property of their respective owners.
PLEASE CONTACT A QUALIFIED TECHNICIAN FOR ASSISTANCE IN INSTALLING OR USING THIS PRODUCT IF YOU ARE NOT
FAMILIAR WITH DOING SO. ANY INSTRUCTIONS INCLUDED WITH THE PRODUCT ARE FOR CONVENIENCE ONLY AND ARE NOT
INTENDED TO BE ALL-INCLUSIVE.
Minimum System Requirements:
USB 1.1 or 2.0 port (USB 2.0 port required for High Speed data transfer) running one of the following operating systems:
Windows 98SE, Windows ME, Windows 2000/XP, MacOS 9.0 or higher.
Windows 98SE does not support the built-in USB Mass Storage Driver. If using Windows 98SE, you must install a driver
we provide which is for this operating system only (see below).
Installing your DiskGO! 1" Mini Hard Drive
If you are using Windows ME/2000/XP, MacOS 9.0 or higher, no additional drivers or software are required. To begin using your
DiskGO! 1" Mini Hard Drive, simply plug the Mini Hard Drive into an available USB port.
Software Installation (Windows 98SE Only)
Note: Drivers are required only if using Windows 98SE. Install the driver PRIOR to connecting the DiskGO! 1" Mini Hard Drive
for the first time.
1. Download the self-extracting driver file from our website (www.edgetechcorp.com/suport/downloads).
2. Unzip the WIN98Driver.zip file and double click the WIN98Driver folder. When folder is opened, run
and follow the
3. After setup is complete, restart your computer. Then plug your DiskGO! into any available USB port.
Removing your DiskGO! 1" Mini Hard Drive Safely:
Please follow these directions to safely remove your device:
Windows 98SE: Unplug the DiskGO! ONLY when the LED is off.
Windows ME/2000/XP: Use the “Unplug or Eject Hardware” icon in the system tray to safely stop the DiskGO! 1" Mini Hard
MacOS: Drag the removable disk icon to the trash bin and unplug the DiskGO! 1" Mini Hard Drive
If you are using the product in a networked environment, consult your System Administrator to determine if you have any
mapped network drives, which can override the built-in drive lettering features of and prevent your DiskGO! from being properly
recognized by your system.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits of a class B digital device, pursuant to Part 15 of the FCC
Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This
equipment generates, uses and can radiate radio frequency energy and ,if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications ,however, there is no guarantee that interference will not
occur in particular installations If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
1. Reorient / Relocate the receiving antenna.
2. Increase the distance between the mouse and receiver.
3. Connect the equipment into an outlet on a circuit different from that the receiver is connected.
4. Consult the dealer or an experienced radio /TV technician for help
ELECTRO-STATIC DISCHARGE (ESD) CAUTION:
The DiskGO! 1" Mini Hard Drive can be damaged by electro-static discharge (ESD). Please touch a grounded surface prior to
operating your DiskGO! 1” Mini Hard Drive.