Drayton MiTime T720R

Drayton MiTime T720R manual

(1)
  • Step 1: Keys and Display - MiTime
    RF Packs: T710R, T720R, T720M, T740R, T 740M
    Single Channel: MiTime T710R Dual Channel: MiTime T720R, T720M Multi Channel: MiTime T740R, T740M
    Step 2: Home Screens
    What is a programmer?
    ... an explanation for householders
    Programmers allow you to set ‘On’ and ‘Off’ time
    periods. Some models switch the central heating and
    domestic hot water on and off at the same time, while
    others allow the domestic hot water and heating to
    come on and go off at different times.
    Set the ‘On’ and ‘Off’ time periods to suit your own
    lifestyle. On some programmers you must also set
    whether you want the heating and hot water to run
    continuously, run under the chosen ‘On’ and ‘Off
    heating periods, or be permanently off.
    The time on the programmer must be correct. Some
    types have to be adjusted in spring and autumn at the
    changes between Greenwich Mean Time and British
    Summer Time.
    You may be able to temporarily adjust the heating
    programme, for example, ‘Override, ‘Advance’ or
    ‘Boost. These are explained in the manufacturer’s
    instructions.
    The heating will not work if the room thermostat has
    switched the heating off. Also, if you have a hot-water
    cylinder, the water heating
    will not work if the cylinder
    thermostat detects that the
    hot water has reached the
    correct temperature.
    What is a room thermostat?
    ... an explanation for householders
    A room thermostat simply switches the heating
    system on and off as necessary. It works by sensing
    the air temperature, switching on the heating when
    the air temperature falls below the thermostat setting,
    and switching it off once this set temperature has
    been reached.
    Turning a room thermostat to a higher setting will not
    make the room heat up any faster. How quickly the
    room heats up depends on the design of the heating
    system, for example, the size of boiler and radiators.
    Neither does the setting affect how quickly the room
    cools down. Turning a room thermostat to a lower
    setting will result in the room being controlled at a
    lower temperature, and saves energy.
    The heating system will not work if a time switch or
    programmer has switched it off.
    The way to set and use your room thermostat is to
    find the lowest temperature setting that you are
    comfortable with, and then leave it alone to do its job.
    The best way to do this is to set the room thermostat
    to a low temperature – say 18ºC – and then turn it up
    by one degree each day until you are comfortable
    with the temperature. You won’t have to adjust the
    thermostat further. Any adjustment above this setting
    will waste energy and cost you more money.
    If your heating system is a boiler with radiators, there
    will usually be only one room thermostat to control the
    whole house. But you can have different temperatures
    in individual rooms by installing thermostatic radiator
    valves (TRVs) on individual radiators. If you don’t
    have TRVs, you should choose a temperature that is
    reasonable for the whole house. If you do have TRVs,
    you can choose a slightly higher setting to make sure
    that even the coldest room is comfortable, then prevent
    any overheating in other rooms by adjusting the TRVs.
    Room thermostats need a free flow of air to sense
    the temperature, so they must not be covered by
    curtains or blocked by furniture. Nearby electric
    fires, televisions, wall or table lamps may prevent the
    thermostat from working properly.
    What is a cylinder thermostat?
    ... an explanation for householders
    A cylinder thermostat switches on and off the heat
    supply from the boiler to the hot-water cylinder. It
    works by sensing the temperature of the water inside
    the cylinder, switching on the water heating when the
    temperature falls below the thermostat setting, and
    switching it off once this set temperature has been
    reached.
    Turning a cylinder thermostat to a higher setting will
    not make the water heat up any faster. How quickly the
    water heats up depends on the design of the heating
    system, for example, the size of boiler and the heat
    exchanger inside the cylinder.
    The water heating will not work if a time switch or
    programmer has switched it off. And the cylinder
    thermostat will not always switch the boiler off,
    because the boiler sometimes needs to heat the
    radiators.
    Cylinder thermostats are usually fitted between one
    quarter and one third of the way up the cylinder. The
    cylinder thermostat will have a temperature scale
    marked on it, and it should be set at between 60C and
    65C, then left to do its job. This temperature is high
    enough to kill off harmful bacteria in the water, but
    raising the temperature of the stored hot water any
    higher will result in wasted energy and increase the
    risk of scalding.
    If you have a boiler control thermostat, it should
    always be set to a higher temperature than that of the
    cylinder thermostat. In most boilers, a single boiler
    thermostat controls the temperature of water sent
    to both the cylinder and radiators, although in some
    there are two separate boiler thermostats.
    MiTime
    MiStat
    Drayton
    MiTime
    TM
    Programmer Series
    RF Packs
    Single Channel: MiTime T710R
    Dual Channel: MiTime T720R, T720M
    Multi Channel: MiTime T740R, T740M
    Invensys
    Customer Service Tel: 0845 130 5522
    Customer Service Fax: 0845 130 0622
    Technical Helpline: 0845 130 7722
    Website: www.draytoncontrols.co.uk
    E-mail: customer.care@invensys.com
    l
    @DraytonControls
    x
    /DraytonControls
    EU Design Regs:- 002180638-1/2/3
    User Guide 06490193001 Iss F
    MiTime
    MiStat
    HOMEOWNER Guide
    Zone = Heating
    Current status: the programme is On
    until 12:00 am
    Link to zone details, see Step 3.
    Link to Settings
    See further details in Step 6.
    Zone = Hot Water
    Current status: the programme is
    Off until 12:00 am
    Link to zone details, see Step 3.
    Press Select ( ) to view or edit zonePress Select ( ) to change mode Press Select ( ) to view or edit zone
    Zone = Heating
    Current status: the programme is On
    until 12:00 am
    Link to zone details, see Step 3.
    Link to Settings
    See further details in Step 6.
    Zone = Hot Water
    Current status: the programme is Off until
    12:00 am. Link to zone details, see Step 3.
    Zone = Zone 3
    Current status: the programme is Always Off
    Link to zone details, see Step 3.
    HOMEOWNER Guide
    Step 3: Zone Details
    (not Single Channel)
    Link to Settings
    See further details in Step 6.
    Now: describes the current status,
    e.g. programme is On until 12:00 am.
    Link to Programme timetable - see
    further details in Step 4.
    Temp: describes the current status
    of the zone temperature, e.g.
    Temperature in zone is 21.0C and the
    setpoint is 21.5C
    Link to modify the zone temperature.
    Current mode: Auto
    Options: see table in Step 3.
    Temp: describes the current status of the
    zone temperature, e.g. Temperature in
    zone is 21.0C and the setpoint is 21.5C.
    Link to modify the zone temperature.
    Press Select ( ) to change mode
    Link to Programme timetable
    See further detail in Step 4.
    MiTime
    Home key: Press to go back
    to the home screen at any
    time
    Date
    Time
    Back key: Press to return to
    the previous screen
    Help text to prompt for
    next action. It relates to the
    highlighted line
    Arrow keys: Press to move
    the highlight on screen, and
    to change field values
    Advance key: Press from
    the home or zone details
    screens to advance to the
    next on or off period
    +hr key: Press from the
    home or zone details
    screens to add up to 3 hours
    to the current period
    Select key: Press to select highlighted
    options, and to open and save editor screens
    This icon used
    throughout these
    instructions refers
    to this button
    LED: Illuminates when any
    zone is scheduled to be ON
    Note:
    See help in product menu for quick
    button description.
    : Indicates an RF transmission issue or
    Service warning.
    : Indicates that holiday is enabled
    Home screen, depending on
    model - see Step 2
    Zone = Heating
    Current mode: Auto
    Options: see table below.
    Now: describes the current status, e.g. programme
    is On until 12:00 am. Link to Programme timetable
    - see further details in Step 4.
    Mode: Description:
    Auto The programmer will control the
    ON & OFF times in line with the
    programmed timetable
    Always Off The selected zone will be OFF
    Always On The selected zone will be ON
    All Day
    (first on / last
    off)
    The programme will control the
    ON & OFF times in line with the
    programmed timetable, but using
    only the first ON event and the last
    OFF event - it will remain ON in
    between these two periods.
Drayton MiTime T720R

Need help?

Number of questions: 0

Do you have a question about the Drayton MiTime T720R or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Drayton MiTime T720R owners to properly answer your question.

View the manual for the Drayton MiTime T720R here, for free. This manual comes under the category Thermostat and has been rated by 1 people with an average of a 5.4. This manual is available in the following languages: English. Do you have a question about the Drayton MiTime T720R or do you need help? Ask your question here

Drayton MiTime T720R specifications

General
Brand Drayton
Model MiTime T720R
Product Thermostats
Language English
Filetype PDF

ManualSearcher.com

Looking for a manual? ManualSearcher.com ensures that you will find the manual you are looking for in no time. Our database contains more than 1 million PDF manuals from more than 10,000 brands. Every day we add the latest manuals so that you will always find the product you are looking for. It's very simple: just type the brand name and the type of product in the search bar and you can instantly view the manual of your choice online for free.

ManualSearcher.com

© Copyright 2020 ManualSearcher.com. All Rights Reserved.

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

Read more