Crestron Saros Sound Bar 200

Crestron Saros Sound Bar 200 manual

(1)
  • SAROS SB-200-P
    Saros
    ®
    Sound Bar 200, Powered
    crestron.com
    |
    800.237.2041
    > High-quality, full-range amplified
    stereo sound bar
    > Delivers enhanced sound quality
    and performance for use with any
    flat panel display
    > Mounts to a wall or sits on a shelf
    > Balanced or unbalanced stereo
    line-level audio input
    [1]
    > Unbalanced stereo audio cable included
    > Powers on and off automatically
    > 100 to 240 Volt AC powered
    The Saros
    ®
    SB-200-P is a stereo sound bar designed to provide
    enhanced audio performance for a flat panel display. Its full-range, front-
    firing speakers offer an improvement over the small, rear-facing speakers
    typical of many display devices. The bracket included with the sound bar
    allows for attachment to a wall surface, or the unit can be placed on a
    shelf below or above the display.
    Built-in amplification allows for direct connection to the line-level audio
    output of the display device, or to the output of an audio preamp, switcher,
    mixer, tv tuner, codec, or Crestron DM
    ®
    receiver.
    [1]
    The amplifier powers on
    automatically when an audio input signal is detected, and powers off if no
    signal is detected for several minutes.
    The SAROS SB-200-P sound bar is ideally suited for use with the
    Crestron RL
    ®
    2 Group Collaboration System and other unified
    communication and videoconferencing systems. It is equally well-suited
    for use in any small to medium sized room or public space in a hotel,
    restaurant, museum, medical center, airport, office building, or residence.
    SPECIFICATIONS
    Features & Performance
    Woofers: (2) 3 inch (76 mm) polypropylene cone w/rubber surround
    Passive Radiator: (2) 3 x 4-3/8 inch (76 x 112 mm) polypropylene cone
    w/rubber surround
    Tweeters: (2) 1 inch (25 mm) polyester dome
    Amplifier Power: 20 Watts per channel, stereo
    Frequency Response: 100 Hz to 20 kHz (±3 dB)
    Output Sensitivity: 83 dB SPL @ 1 meter, both channels driven @ 1 Watt
    Input Sensitivity: 0.75 Vrms per channel for full rated output
    Go To Sleep Time: 20 minutes (±5 minutes) with no signal present
    Wake Threshold: 5 mV (±2 mV) typical
    Connections
    BALANCED AUDIO INPUTS: (1) 5-pin 3.5 mm detachable terminal block;
    Balanced stereo line-level audio input
    [1]
    ;
    Maximum Input Level: 0.85 Vrms;
    Input Impedance: 10k Ohms
    UNBALANCED AUDIO INPUTS: (2) RCA connectors, female;
    Unbalanced stereo line-level audio input
    [1]
    ;
    Maximum Input Level: 0.85 Vrms;
    Input Impedance: 10k Ohms;
    NOTE: Right-angle plugs may be required for wall mount applications. A
    59 inch (150 cm) right-angle RCA to straight RCA stereo cable is included.
    100-240V~50/60Hz 50W: (1) IEC 60320 C8 main power inlet;
    Mates with removable power cord, included
    Controls & Indicators
    100-240V~50/60Hz 50W: (1) Rocker switch, turns main power on or off
    PWR: (1) Blue LED, indicates the main power switch is turned on
    Power Requirements
    Main Power: 50 Watts (500 mA maximum) @ 100-240 Volts AC, 50/60 Hz
    Environmental
    Temperature: 41° to 104° F (5° to 40° C)
    Humidity: 10% to 90% RH (non-condensing)
Crestron Saros Sound Bar 200

Need help?

Number of questions: 0

Do you have a question about the Crestron Saros Sound Bar 200 or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Crestron Saros Sound Bar 200 owners to properly answer your question.

View the manual for the Crestron Saros Sound Bar 200 here, for free. This manual comes under the category Sound Bars and has been rated by 1 people with an average of a 7.6. This manual is available in the following languages: English. Do you have a question about the Crestron Saros Sound Bar 200 or do you need help? Ask your question here

Crestron Saros Sound Bar 200 specifications

Brand Crestron
Model Saros Sound Bar 200
Product Soundbar
Language English
Filetype PDF
Audio
Audio output channels -
RMS rated power -
Audio decoders -
Soundbar speaker
Soundbar speaker RMS power 20
Number of woofer drivers 2
Woofer diameter (imperial) 3 2011-05-04 11:27:54 2012-06-08 13:40:02 12 28 1 RPM 0000-00-00 00:00:00 2012-06-08 13:40:02 14 30 1 M 0000-00-00 00:00:00 2012-06-08 13:40:02 15 31 1 kHz 0000-00-00 00:00:00 2012-06-08 13:40:02 16 32 1 ° 0000-00-00 00:00:00 2012-06-08 13:40:02 17 33 1 x
Woofer diameter 76mm
Number of tweeter drivers 2
Tweeter diameter (imperial) 1 2011-05-04 11:27:54 2012-06-08 13:40:02 12 28 1 RPM 0000-00-00 00:00:00 2012-06-08 13:40:02 14 30 1 M 0000-00-00 00:00:00 2012-06-08 13:40:02 15 31 1 kHz 0000-00-00 00:00:00 2012-06-08 13:40:02 16 32 1 ° 0000-00-00 00:00:00 2012-06-08 13:40:02 17 33 1 x
Tweeter diameter 25mm
Subwoofer
Subwoofer included
Packaging content
Receiver included -
Features
FM radio
Product colour Black
Wall mountable
TV stand usage -
Other features
Apple docking compatibility Not supported
Docking connector type Not supported
Ports & interfaces
Connectivity technology Wired
HDMI ports quantity 0
Digital audio coaxial in 0
Bluetooth
Audio (L/R) in 1
Weight & dimensions
Width 1031mm
Depth 71mm
Height 106mm
Soundbar weight 3600
Power
AC input voltage 100-240
AC input frequency 50 - 60
Power consumption (typical) 50
Technical details
Center speaker frequency range 100 - 20000

Related product manuals

Soundbar Crestron

Frequently Asked Questions

Below, you will find the most frequently asked questions about the Crestron Saros Sound Bar 200.

Is your question not listed? Ask your question here

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

Read more