Crestron C2NI-AMP-6X100

Crestron C2NI-AMP-6X100 manual

  • C2N-AMP-6X100
    6 Room + 2 Audio System
    > Affordable audio distribution for six rooms,
    expandable for up to 24 rooms
    > Additional line-level room outputs enable
    support for two additional zones
    (expandable up to eight)
    > Integrated 12-channel amplifier delivers
    50 W/Ch. @ 8Ω and 75 W/Ch. @ 4Ω
    > Each amplified room output is bridgeable
    for 150 W @ 8Ω (mono)
    > Provides support for passive or active
    powered subwoofers
    > Features independent control of volume,
    bass, treble, and other settings per room/zone
    > Includes twelve stereo line inputs with loop-thru for
    easy expansion
    > Includes front panel controls for source selection and
    volume control
    > Front panel is customizable using Crestron
    Engraver software
    or pre-printed labels provided
    > Allows for Crestron system integration via Cresnet
    or Ethernet
    The Crestron
    C2N-AMP-6X100 is a versatile and cost-effective multiroom
    audio system designed for small to moderate sized houses, condominiums,
    and businesses. Its integrated multichannel power amp provides ample
    power for up to six rooms, which can be expanded simply using additional
    C2N-AMP-6X100 units, or by connecting external amplifiers via the two
    extra line-level room outputs. Twelve stereo line inputs are included to
    accommodate a rack full of music and AV sources. With many of the same
    pro features as Crestron’s more expensive systems, the C2N-AMP-6X100
    lets everyone enjoy their own choice of music, sports, news, or talk in any
    room as part of a complete Crestron system.
    Powerful Stuff
    Each room output is capable of 50 Watts/Ch. @ 8Ω or 75 Watts/Ch. @ 4Ω
    — perfect for driving a house full of Crestron Excite
    , Aspire
    , Essence
    , or Saros
    Any room output may be bridged to deliver a
    robust 150 Watts @ 8Ω in mono to drive an in-wall subwoofer, or to deliver
    increased power in stereo using two bridged room outputs paired together.
    Each room has the ability to select any of the twelve input sources, with
    complete control over the room’s volume, bass, treble, balance, loudness,
    mute, and mono settings.
    Subwoofer Support
    The C2N-AMP-6X100 supports both passive and active type subwoofers
    to provide any space with the extra low end you need to give your music
    maximum impact.
    Passive Subwoofers — Any room output can be configured for bridged
    mono operation to drive a single 8Ω passive subwoofer with 150 Watts
    of power. Simply pair the bridged room output with any stereo room
    output to support a complete 2.1 speaker system using a passive in-
    wall subwoofer, such as the Aspire IWS82, along with a pair of Aspire
    or other full-range speakers.
    Active Powered Subwoofers — Room outputs 5 and 6 are each
    equipped with a stereo line output, which can be used to feed an active
    powered subwoofer. Simply connect a pair of full-range speakers to the
    speaker outputs of either room output 5 or 6, and connect the
    corresponding line output to the subwoofer’s built-in amplifier. For long
    wire runs, use a Crestron AUD-EXT Audio over CAT5 Extender.
    Bonus Zones
    In addition to its six amplified room outputs, the C2N-AMP-6X100 also
    includes two fully-independent line-level room outputs (Room outputs 7
    and 8), providing a total of eight individually-controllable zones from a
    single unit. Each line-level room output includes the same complement of
    volume, bass, treble, and other adjustments as the amplified room outputs.
    Extra Room Zones — Simply connect external power amplifiers to
    outputs 7 and 8 to add support for up to two more rooms. Choose a
    high-powered amplifier, such as the Crestron AMP-2210S
    , to deliver
    extra output to the game room, workout room, indoor pool, outdoor
    deck, or any other space that demands higher volume levels.
    Home Theaters Share all your whole-house audio sources with
    your home theater and other surround sound zones. Connect either
    output to the input of an AV receiver or surround sound processor,
    such as the Crestron HD-XSPA
    . Use a Crestron AUD-EXT Audio over
    CAT5 Extender
    to run the line-level signal up to 2000 feet (610
    meters) to feed any AV receiver located far away from the central
    equipment cabinet.
    Headphones — Create your own personal listening zone by connecting
    either output to a headphone amplifier or wireless headphone system.
    Outdoor Landscape Speakers — Connect a 70 or 100 Volt amplifier,
    such as the Crestron AMP-2210T
    , to provide transformer-isolated
    “constant-voltage” outputs to feed a system of distributed speakers
    around the pool or patio. Use this solution with Crestron AIR landscape
    speakers or Saros SR surface mount speakers.
    Commercial Applications For restaurants, nightclubs, and retail
    spaces, a 70 or 100 Volt “constant-voltage” type amplifier can be
    connected to feed a distributed speaker system in a large dining area,
Crestron C2NI-AMP-6X100

Need help?

Number of questions: 0

Do you have a question about the Crestron C2NI-AMP-6X100 or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Crestron C2NI-AMP-6X100 owners to properly answer your question.

View the manual for the Crestron C2NI-AMP-6X100 here, for free. This manual comes under the category Receivers and has been rated by 1 people with an average of a 6.2. This manual is available in the following languages: English. Do you have a question about the Crestron C2NI-AMP-6X100 or do you need help? Ask your question here

Crestron C2NI-AMP-6X100 specifications

Brand Crestron
Model C2NI-AMP-6X100
Product Receiver
Language English
Filetype PDF
Product colour Black
Technical details
Product colour Black
Purpose -
Connectivity technology Wired
Material Metal
Audio output channels 8.0
Peak power per channel -
Amplifier class -
Total Harmonic Distortion (THD) 0.25
Signal-to-Noise Ratio (SNR) 100
Ports & interfaces
Speakers connectivity type RCA
Audio (L/R) in 14
Audio (L/R) out 14
Ethernet LAN (RJ-45) ports 1
Weight & dimensions
Width 439mm
Depth 347mm
Height 89mm
Weight 12000
Operational conditions
Operating temperature (T-T) 5 - 40
Operating relative humidity (H-H) 10 - 90
AC input voltage 220-240
AC input frequency 50 - 60
Power consumption (typical) 55

Related product manuals

Receiver Crestron

Frequently Asked Questions

Below, you will find the most frequently asked questions about the Crestron C2NI-AMP-6X100.

Is your question not listed? Ask your question here

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

Read more