Boss Audio Systems PA100B manual

Boss Audio Systems PA100B

On this page you find the Boss Audio Systems PA100B manual. Please read the instructions in this operator manual carefully before using the product. If you have any questions about your that are not answered in the manual, please share your question in the troubleshooting section on the buttom of this page.

Brand
Boss Audio Systems
Model
PA100B
Product
EAN
636210100638
Language
English
Filetype
PDF
USER MANUAL
BLUETOOTH
®
SPEAKER
PA100B
WIRELESS
TELEPHONE
888.990.1236
805.988.0215
FAX
805.988.0275
TECHNICAL SUPPORT
planetaudiousa.com/support
PA100B 0313
"MMTQFDJÎDBUJPOTTVCKFDUUPDIBOHFXJUIPVUOPUJDF
2013 Planet Audio
planetaudiousa.com
Warranty card
( THD=10% ) 1 2W
3.5 mm Aux-In Cable
OD 26
X H 27 5
(OD 66mm X H 70mm)
3 7V 400mAh Li-polymer battery
33W
20Hz~20KHz
DC 5V 400mA
PA100B
press:
press:
press:
Short press:
Parameter
Package Contents
Function Indication Drawing
Operation Specification
Operation the PA100B
Powering On
-
Slide the On/Oī switch to the "On" posŝƟon, the Blue LED wilůŇash. When the
Green LED is on, the unit is in Bluetooth Pairing Mode.
Powering Off
-Slide the On/Oī switch to the "Oī"posiƟon, all the LED status lights will shut oī.
Bluetooth Mode
Pairing
-The unit will automaƟcally go into “Pairing Mode” when it is turned on.
- Go into your devices seƫngs menu and look for “Planet Audio
-If prompted for a password enter: 0000
-AŌer the unit has paired,
and connected it will connect automaƟcally
when PA100B is turned on and the device is in range.
-If no device is found aŌer 25 sec. the PA100B will automaƟcally enter
pairing mode.
Streaming Music
- Press “ ” to start playing music
- Press “+” to play the next track
- Press “ -” to play previous track
- Press and Hold either “+/-” for volume
Aux-In Mode
Plug in the supplied 3.5 mm cable into the PA100B. The other end is connected
to the device.
*Please note that only “Volume +/-” will funĐƟon on
the unit. Track control does
not funĐƟon when in Aux-In mode.
Charging
-Ʃach the USB cable to the PA100B, and plug in to any USB charger. If the unit
is completely discharged, it take approximately 2.5 hours to fully charge the unit.
LED Status
Red LED: On- Charging/ Oī– Charging complete
Green LED: On-BT Mode
Blue LED: Flashing-Pairing Mode/ Slow Flash-Connected

Do you have a question about the Boss Audio Systems PA100B?

If you have a question about the "Boss Audio Systems PA100B", don't hesitate to ask. Make sure to describe your problem clearly, this way other users are able to provide you with the correct answer.

Buy related products:

Product specifications

Loudspeakers
Audio output channels   1.0
Number of speakers   1
Number of drivers   -
Speaker type   1-way
Performance
Recommended usage   Universal
Amplifier   -
Audio
RMS rated power   -
Frequency range   -
Impedance   3
Design
Product colour   Black
Volume control Digital
On/off switch   yes
Product type  
Other features
Backlight   yes
Continuous audio playback time   4
Power LED yes
Ports & interfaces
Bluetooth range 10
Connectivity technology Wireless
USB 2.0 ports quantity   1
Headphone out   yes
Bluetooth   yes
Packaging data
Quantity per pack 1
- Bluetooth
Power
Power source type   Battery
Battery voltage   3.7
Battery technology   Lithium-Ion (Li-Ion)
Battery capacity   400
USB charging yes
AC adapter frequency 20 - 20000
Weight & dimensions
Width   66 mm
Depth   66 mm
Height   70 mm
Packaging content
Cables included AUX
Manual yes