Bosch Aquatak 10 manual

On this page you find the Bosch Aquatak 10 manual. Please read the instructions in this operator manual carefully before using the product.If you have any questions about your that are not answered in the manual, please share your question in the troubleshooting section on the buttom of this page.

Do you have a question about the Bosch Aquatak 10?

If you have a question about the "Bosch Aquatak 10", don't hesitate to ask. Make sure to describe your problem clearly, this way other users are able to provide you with the correct answer.

Which motor oil is used in Bosch aqutak 10?

, 1 year ago

Please can you help as I have lost my instructions to aquatak 10. . Can you use the soap container with the brush head?

, 4 years ago

I have an aquatak 10 it seems oil is leaking, what kind of oil I going to use? Thanks

, 2 years ago

I was wondering how do I get a hold of the spray attachment on the end of the spray gun for my bosch aquatak 10 .I live in perth wa so close by would be good ....thanks

, 2 years ago

Bosch Aquatak 10 not working. Plugged in, has power, go to use it and no water comes out. I have bought a new hose and I have the same problem as I did with the old one. If I put the spray nozzle on the motor turns over and no water comes out. If I take the nozzle off some water comes out and the motor ticks along as it should do. Very puzzling.

, 2 years ago

My bosch aquatak 10 have oil leak,my problem is what kind of oil should I replace to my aquatak?thanks

, 3 years ago

Haven't used for months. Motor stops after working for 5 minutes. I tried to cool it down for 15minutes but the motor will not start. It seems that water is not clogged inside as it can flew through squaring from inlet to outlet.

, 3 years ago

I want control head please tell me what to do

, 3 years ago

I have a Aquatak 10 Bosch Pressure washer which has, in my opinion has a reduced pressure problem.I have had the machine approx. 2/3 years.Hardly used in that time, probably no more at the most four times!

, 3 years ago

I have thick oil leaked from the machine when it had been left standing for about 2months.Oil seal? Where?Please advise.

, 3 years ago
Bosch Aquatak 10 PDF preview

Product specifications

Weight & dimensions
Weight 6000
Performance
Maximum flow rate300
Working pressure (max)100
Maximum input water temperature40
Design
Hose length 3.5
Colour of product Black, Green
Packaging data
Surface cleaner -
Rotating nozzle -
Special nozzle -
Wash brush -
Power
Power consumption (typical) 1300