These instruction shall also be available on website: www.whirlpool.eu
Keep these instructions close at hand for future reference.
YOUR SAFETY AND THE SAFETY OF OTHERS ARE VERY IMPORTANT
This manual and the appliance itself provide important safety messages, to be read and observed at all times.
All Safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what
can happen if the instructions are not followed.
-The appliance must be disconnected from the power supply before carrying out any installation work.
-Installation and maintenance must be carried out by a qualified technician, in compliance with the manufacturer’s instructions
and local safety regulations. Do not repair or replace any part of the appliance unless specifically stated in the user manual.
-Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this appliance.
The electrical and gas connections must comply with local regulations.
-When the hob is installed, provide a multi-pole circuit breaker with a contact separation of at least 3 mm, that provides
-Regulations require that the appliance is grounded.
-The power cable must be long enough for connecting the appliance, once fitted in its housing, to the power supply
-Use only flexible or rigid metal hose for gas connection.
-If necessary, the electrical power cable must be replaced exclusively with a power cable having identical characteristics to the original
supplied by manufacturer (type H05V2V2-F 90°C or H05RR-F). This operation must be performed by a qualified electrician.
-The manufacturer cannot be held responsible for any injury to persons or animals or damage to property arising from
failure to comply with these requirements.
-Do not use multiple plug adapters or extension cords.
-Do not pull the power supply cord in order to unplug the appliance.
-The electrical components must not be accessible to the user after installation.
-Do not touch the appliance with any wet part of the body and do not operate it when barefoot.
-This hob (class 3) is designed solely for private household use for cooking food. Do not use this appliance as a space
heater to heat or warm the room. Doing so may result in carbon monoxide poisoning and overheating of the hob. The
Manufacturer declines all responsibility for inappropriate use or incorrect setting of the controls.
-Very young (0-3 years) and young children (3-8 years) shall be kept away unless continuously supervised. Children from 8
years old and above and persons with reduced physical, sensory or mental capabilities or lack of experience and
knowledge can use this appliance only if they are supervised or have been given instructions on safe appliance use and if
they understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall
not be made by children without supervision.
-The use of a gas appliance produces heat and humidity in the room. Make sure the room is well-ventilated, or install an
extractor hood with exhaust duct.
-In case of prolonged use, additional ventilation may be necessary (by opening a window or increasing the hood extraction speed).
-After use, make sure the knobs are in off position and close the main gas supply cock or the gas cylinder valve.
-Overheated oils and fats catch fire easily. Always remain vigilant when cooking foods rich in fat, oil or alcohol (e.g. rum,
-Keep the packaging materials out of the reach of children.
-Before cleaning or maintenance wait for hob to cool down.
-Do not use the appliance outdoors.
Use protective gloves to perform all unpacking and installation operations. After unpacking the hob, make sure that it has not
been damaged during transport. In the event of problems, contact the dealer or your nearest After-sales Service.
These instructions are only valid for the countries whose symbols is shown on the rating plate (under cooktop).
TECHNICAL INFORMATION FOR THE INSTALLER
•This product can be embedded in a worktop 20 to 50 mm thick.
•If there is no oven beneath the hob, insert a separator panel that has a surface at least equal to the opening in the work
surface. This panel, that has to close completely the cutout in order to avoid any contact with the bottom part of the hob, must
be positioned at a maximum distance of 150 mm below the upper surface of the work surface but, in no case less than 20 mm
from the bottom of the hob. In the case that you intend to install an oven beneath the hob, make sure that it is equipped with
a cooling system. The manufacturer declines all liability if another brand oven is installed beneath the hob.
•Before installation, make sure that:
-the local gas delivery conditions (nature and pressure) are compatible with the settings of the hob (see the
rating plate and injector table);
-the outer surfaces of the furniture or appliances adjacent to the hob are heat resistant according to local regulations;
-this appliance is not connected to a fume exhaust device. It shall be installed in accordance with current installation
regulations. Particular attention shall be given to the relevant requirements regarding ventilation.
-combustion products are discharged outdoors through specific hoods or wall and/or window mounted electrical fans.
IMPORTANT SAFETY INSTRUCTIONS
This is the safety alert symbol, pertaining to safety, which alerts users to potential hazards to themselves and others.
All safety messages will follow the safety alert symbol and either the terms:
Indicates a hazardous situation which, if not avoided, will cause serious injury.
Indicates a hazardous situation which, if not avoided, could cause serious injury.
If the information in this manual is not followed exactly, a fire or explosion may result
causing property damage or injury.
What to do if you smell gas:
-Do not try to light any appliance.
-Do not touch any electrical switch.
-Do not use any phone in your building.
-Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.
-If you cannot reach your gas supplier, call the fire department.
-Installation and service must be performed by a qualified installer, service agency or the gas supplier.
-Use appliance in well ventilated rooms only.
SAVE THESE INSTRUCTIONS
This operation must be performed by a qualified technician.
•The gas supply system must comply with local regulations.
•You can find specific local regulations for some countries in the paragraph
“Reference to Local Regulations”. If no information concerning your Country
is given, please ask details to your Installer.
•The connection of the hob to the gas pipe network or gas cylinder must be
made by means of a rigid copper or steel pipe with fittings complying with
local regulations, or by means of a continuous-surface stainless steel hose
complying with local regulations. Interpose gasket (B) in the elbow
connection.The maximum length of the hose is 2 m.
•FOR BELGIUM ONLY: It is necessary to replace the elbow connection (A) on
the appliance, with the one supplied (if present).
IMPORTANT: if a stainless steel hose is used, it must be installed so as not to
touch any mobile part of the furniture. It must pass through an area where
there are no obstructions and where it is possible to inspect it on all its length.
•After connection to the gas supply, check for leaks with soapy water. Light up the
burners and turn the knobs from max position to minimum position to check
400010809555Manufacturer: Whirlpool Europe S.r.l. Socio Unico, Viale G. Borghi 27, 21025 Comerio (VA) ITALY
BUILT-IN GAS HOB INSTRUCTIONS
(Apply the label from warranty here)
Number of questions: 0
Do you have a question about the Bauknecht TGW 5675/IN or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Bauknecht TGW 5675/IN owners to properly answer your question.
About the Bauknecht TGW 5675/IN
View the manual for the Bauknecht TGW 5675/IN here, for free. This manual comes under the category Stoves and has been rated by 1 people with an average of a 8.4. This manual is available in the following languages: English. Do you have a question about the Bauknecht TGW 5675/IN or do you need help? Ask your question here
Below, you will find the most frequently asked questions about the Bauknecht TGW 5675/IN.
Can I use my pans on induction?
Nowadays almost all pans are suitable for induction. You can easily test whether your old pans can also be used on induction by holding a magnet against the bottom of the pan. If the magnet stays on the pan, your old pan is suitable for induction.
How do I reset my induction hob?
Most induction hobs can be reset by disconnecting the hob from power by unplugging it from the power outlet. You will then have to wait at least 60 minutes.
What is a Perilex connection?
A Perilex connection is a special connection that can handle more power than a normal connection. This connection has five holes instead of two and is often used for induction hobs.