audiovox RC60i manual

audiovox RC60i

On this page you find the audiovox RC60i manual. Please read the instructions in this operator manual carefully before using the product. If you have any questions about your that are not answered in the manual, please share your question in the troubleshooting section on the buttom of this page.

Brand
audiovox
Model
RC60i
Product
EAN
Language
English, French
Filetype
PDF
Station presets
To store a station as preset:
1. Tune to a radio station.
2. Press STORE.
An available preset location
(e.g.
) shows on the display.
3. Press << or >> (or RECALL) to select
a desired preset location (01 - 20).
4. Press STORE.
shows on the display as
confi rmation.
You can save up to 20 preset
stations.
To recall a preset station:
1. In radio mode, press RECALL.
The existing preset station number
shows on the display.
2. Press << or >> (or RECALL) to select
a desired preset station.
the iPod mode is selected but
without an iPod/iPhone connected.
To listen to the auxiliary player:
If an auxiliary player (e.g. mp3
player) is connected, press AUX to
select AUX mode and start playback
on your auxiliary player.
To change or check the remaining
time in sleep mode:
• Press SLEEP once to check the
remaining sleep time. Press SLEEP
repeatedly to select another sleep
time.
To cancel the sleep mode:
If you decide to turn off the unit
sooner, press SNOOZE, OFF or press
SLEEP repeatedly to select “OFF”.
user manual
guide de l’utilisateur
EN/F
It is important to read this user manual prior to using your new product for the fi rst time.
Nous vous recommandons de lire ce manuel avant d’utiliser votre nouveau produit
pour la première fois.
RC60i
v1.0 (1.0.1.0) (EN/F)
Before you begin
General controls
FCC information General controls
Clock
Radio iPod/iPhone
Wake function
Plugging in for power
Insert the plug of the unit into an AC
power outlet.
Refer to the “Clock” section and
follow the instructions to get the
clock time shown correctly with the
Auto Clock set feature.
Battery back-up operation
This clock radio is equipped with a
memory holding system that can be
powered with 9V battery. The power
failure protection circuit will not
operate unless battery is installed. When
normal household power is interrupted,
or AC line cord is unplugged, the
batteries will power the clock radio to
keep track of time and alarm settings
programmed into memory. When the
battery backup functions, the digital
display will not light, however, the
function of alarm still occurs during the
power interruption if remaining battery
power is adequate. Normal operation
will resume after AC power is restored
so you will not have to reset the time or
the alarm.
To install or replace the batteries:
1. Remove battery compartment door
(located at the bottom of the radio)
by applying thumb pressure to the
tab on battery door and then lift
the door out and off the cabinet.
2. Insert or replace a 9V battery (not
included).
3. Replace the compartment door.
It is recommended to plug the
unit for AC power while replacing
batteries to avoid the loss of clock
and wake time/mode settings.
Front view
Side view
Top view
Rear view
Setting clock
1. Press SET on the top of the unit
until the clock setting icon
ashes on the display.
2. Press << or >> on the top of the
unit to set the clock time. The time
decrements or increments follow by
a faster rate when you press and
hold the button.
The clock setting icon ashes
when you are setting the time. AM
or PM icon also lights beside the
time.
3. To save and exit the clock setting,
wait for about 5 seconds or press
SET until the clock setting icon (
) is off and the wake setting icons (
/ / or / / ) are either
off or stop fl ashing.
Display brightness
Press BRIGHTNESS to dim the display
and press again to restore to the
original brightness level.
Listening to the radio
To turn on or off radio:
1. Press RADIO on the front of the
unit to turn on the radio.
The radio mode icon (
) lights on
the display.
2. Press OFF to turn off the radio, or
press AUX or iPod to select another
sound mode.
To select radio band:
In radio mode, press RADIO to
select the radio band (AM/FM).
The selected radio band icon lights
on the display.
To tune frequency:
• Press << or >>. The selected
frequency shows on the display.
Press and hold to automatically
search for the next available station.
Antenna
Built-in AFC
The Built-in Automatic Frequency
Control (AFC) works only on FM. It helps
reducing drift on FM reception and
keeping the radio locked in on the FM
station to which it is tuned.
AM Antenna
For AM reception, connect the AM
antenna loop to the back of the radio.
Stretch out the antenna cord to its
fullest length and rotate the antenna
for better reception.
Listening to iPod/iPhone
To connect iPod/iPhone:
1. Push the universal dock for iPod on
the right of the unit to open it.
2. Place the appropriate adapter
provided with your iPod/iPhone and
then place your iPod/iPhone on the
universal dock for iPod/iPhone.
To select iPod mode:
• Press iPod on the front of the unit
to select the iPod mode.
The iPod mode icon (
) lights on
the display.
Playback from the iPod/iPhone starts
automatically.
If no iPod/iPhone is connected
in the iPod mode, the unit will
exit the iPod mode and turn off
automatically.
To control the playback:
1. During playback, press iPod to
pause the playback and press again
to resume.
2. Press << or >> to skip to the
previous or next fi le.
Press and hold << or >> to search
backward or forward on the current
playback content.
3. Press SHUFFLE to play the fi les in
random order in the iPod/iPhone.
Press again to cancel the function
(shows on the iPod/iPhone display).
4. Press REPEAT to select a repeat
playback mode (repeat 1 or repeat
all). Press REPEAT until no repeat
mode is selected (shows on the
iPod/iPhone display) to cancel the
repeat playback.
To charge the iPod/iPhone:
You may charge the battery of your
iPod/iPhone through the universal
dock for iPod while the unit is
turned off (standby mode) or in
the AUX, Radio (FM band only) or
iPod mode. Charging control should
be operated on the iPod/iPhone. It
is not necessary to charge in iPod
mode, unless you are listening to
the iPod.
Set wake time
This unit allows 2 wake times to be set.
1. Press SET on the top of the unit
until a WAKE 1 icon (
, or
) or a WAKE 2 icon ( , or )
ashes on the display.
2. Press << or >> on the top of the
unit to set the wake time. The time
decrements or increments follow by
a faster rate when you press and
hold the button.
3. To save and exit the wake setting,
wait for about 5 seconds or press
SET until the clock setting icon (
) is off and the wake setting icons (
/ / or / / ) are either
off or stop fl ashing.
To check the wake time after
setting, press SET until a WAKE
1 icon (
/ / ) or WAKE 2
icon (
/ / ) fl ashes and
the respective assigned wake time
shows on the display.
Select the wake source
You may be woken up by the alarm,
radio, or music from iPod/iPhone.
1. Set a wake time (refer to the above
instructions).
2. Press WAKE 1 or WAKE 2 to select
a wake mode. Corresponding icon
lights on the front of the unit.
– Wake 1 by alarm
– Wake 1 by radio
– Wake 1 by iPod/IPhone
– Wake 2 by alarm
– Wake 2 by radio
– Wake 2 by iPod/IPhone
If Waking to Alarm (
, ) is
selected:
Wake to Alarm uses GRAD-U-
WAKE, a gentle increase to the
maximum alarm tone volume over
30 to 45 seconds.
If you set the wake function with
low volume level before going
to bed, we advise using Waking
to Alarm mode to wake you up
since the volume will automatically
increase.
If Waking to RADIO (
, ) is
selected:
Select a desired wake up radio
channel (refer to “Listening to the
radio”). If no wake up channel is
set, your last listening radio station
will be selected.
Sleep function
In the sleep mode, the radio, iPod or
AUX mode can be set to operate for a
certain period of time before turning
off automatically.
To set the sleep time:
1. Press SLEEP repeatedly to cycle
among the sleep time available
(90min, 60min, 30min, 15min and
OFF. The sleep time is default to 90
min).
• The icon
ashes while selecting.
2. When the desired sleep time is
selected, release SLEEP and wait for
about 5 seconds, the sleep time is
now set.
• The icon
lights on the display.
To listen to the radio:
The radio turns on by default. If
not, press RADIO and select a radio
station as usual.
To listen to the iPod/iPhone:
Press iPod and then press << or >>
to select a fi le on the iPod/iPhone.
Playback will be in repeat all fi les
mode automatically.
If iPod mode is selected in your last
sleep mode setting, the iPod/iPhone
will start to play, instead of the
radio.
The radio will be played whenever
To select auxiliary mode:
1. Connect your auxiliary source (e.g.
mp3 player) to the AUX input jack
at te back of the unit with an audio
cable (not supplied).
2. Press AUX to turn on the unit or to
switch to listen to AUX from other
modes.
The auxiliary mode icon (
)
lights on the display.
Adjust the auxiliary player to mid-
range volume and adjust the master
volume on the unit. Do not turn
the volume of the auxiliary player
too high as this may affect the
sound quality. For other playback
operations, control them on your
auxiliary player.
Auxiliary source
Adjust the volume to your desired
level.
• Press OFF to turn off the unit.
If Waking to iPod/iPhone (
, ) is
selected:
Adjust the volume to your desired
level. The last played fi le on the
iPod/iPhone will be played when the
wake function activates.
• Press OFF to turn off the unit.
Note: If there is no iPod/iPhone
connected, the alarm tone will sound
instead even if Waking to iPod mode
is selected.
Turn off the wake
function
To silence the wake function
momentarily:
• Press SNOOZE. The alarm will sound
again when the snooze period
is over. The snooze period is 9
minutes.
OR
To stop the wake function:
• Press OFF. The alarm will be on
again the following day at the same
time.
OR
To disable the wake function
completely:
• Press WAKE 1 or WAKE 2
repeatedly until no corresponding
wake icon (
, , or , , )
shows on the display.
1. SNOOZE – Turn off the wake function momentarily; turn off the sleep
function
2. REPEAT – Select repeat playback mode for iPod/iPhone
3. SLEEP – Refer to “Sleep function”
4. BRIGHTNESS – Adjust display brightness
5. RECALL – Recall preset radio stations
6. SHUFFLE – Select random playback mode for iPod/iPhone
7. WAKE 1 – Activate or change Wake 1 settings
8. << or >> – Search radio frequencies; skip or search music fi le in iPod/iPhone;
adjust clock time and wake time
9. SET – Enter setting mode for setting clock time, Wake 1 time or Wake 2 time
10. WAKE 2 – Activate or change Wake 2 settings
11. STORE – Save radio stations as presets
When the wake
function activates, the
corresponding wake
icon will fl ash until the wake
function is turned off. The icon
will then stop fl ashing and keep
lighting up.
When the AC power is
disconnected, all wake mode will
be reverted to alarm tone.
1
32
6 11
7 10
9
8 8
4 5
Universal dock for iPod/iPhone
(push to open or close)
AM loop
antenna socket
Plugging in for power
AC OUTLET POWER SUPPLY:
120 V ~ 60 Hz
Important battery
precautions
Any battery may present a risk of
re, explosion, or chemical burn
if abused. Do not try to charge a
battery that is not intended to be
The AC/DC adapter supplied with
this product is intended to be
correctly oriented in a vertical or
oor mount position.
Do not use unauthorized chargers
or power adapters. Use only
chargers that came with your
product or that is listed in the user’s
guide.
Apparatus shall not be exposed to
dripping or splashing and no objects
lled with liquids, such as vases,
shall be placed on the apparatus.
Always leave suffi cient space around
the product for ventilation. Do
not place product in or on a bed,
rug, in a bookcase or cabinet that
may prevent air fl ow through vent
openings.
Do not place lighted candles,
cigarettes, cigars, etc. on the
product.
Connect power cord only to AC
power source as marked on the
product.
Care should be taken so that objects
do not fall into the product.
Do not attempt to disassemble
the cabinet. This product does
not contain customer serviceable
components.
The marking information is located
at the bottom of apparatus.
Caution marking is located at
bottom of apparatus.
Only use attachments/accessories
specifi ed by the manufacturer.
Use only with the cart, stand,
tripod, bracket, or table specifi ed
by the manufacturer, or sold with
the apparatus. When a cart is used,
use caution when moving the cart/
apparatus combination to avoid
injury from tip-over.
Unplug this apparatus during
lightning storms or when unused
for long periods of time.
Refer all servicing to qualifi ed
service personnel. Servicing is
required when the apparatus has
been damaged in any way, such
as power-supply cord or plug is
damaged, liquid
has been spilled
or objects have
fallen into the
apparatus, the
apparatus has
been exposed to
rain or moisture,
does not operate normally, or has
been dropped.
• ADDITIONAL SAFETY
INFORMATION
Main plug is used as disconnect
device and it should remain readily
operable during intended use. In
order to disconnect the apparatus
from the mains completely, the
mains plug should be disconnected
from the mains socket outlet
completely.
PLEASE READ AND SAVE THIS FOR FUTURE REFERENCE
IMPORTANT SAFETY INSTRUCTIONS
Some of the following information may
not apply to your particular product;
however, as with any electronic product,
precautions should be observed during
handling and use.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near
water.
Clean only with dry cloth.
Do not block any ventilation
openings. Install in accordance with
the manufacturer’s instructions.
Do not install near any heat sources
such as radiators, heat registers,
stoves, or other apparatus (including
amplifi ers) that produce heat.
Do not defeat the safety purpose
of the polarized or grounding-type
plug. A polarized plug has two
blades with one wider than the
other. A grounding type plug has
two blades and a third grounding
prong. The wide blade or the third
prong is provided for your safety. If
the provided plug does not fi t into
your outlet, consult an electrician
for replacement of the obsolete
outlet.
Protect the power cord from being
walked on or pinched particularly at
plugs, convenience receptacles, and
the point where they exit from the
apparatus.
]
Portable Cart Warning
recharged, do not incinerate, and
do not puncture.
Non-rechargeable batteries, such as
alkaline batteries, may leak if left in
your product for a long period of
time. Remove the batteries from the
product if you are not going to use
it for a month or more.
If your product uses more than one
battery, do not mix types and make
sure they are inserted correctly.
Mixing types or inserting incorrectly
may cause them to leak.
Discard any leaky or deformed
battery immediately. They may
cause skin burns or other personal
injury.
Please help to protect the
environment by recycling or
disposing of batteries according to
federal, state, and local regulations.
Ecology
Help protect the environment - we
recommend that you dispose of used
batteries by putting them into specially
designed receptacles.
For your records
In the event that service should be
required, you may need the model
number and the serial number. In the
space below, record the date and place
of purchase and the serial number:
Model No.:
Date of Purchase:
Place of Purchase:
Serial No.:
Technical information
Product: Clock Radio
Brand: RCA
Model: RC60i
Electrical consumption
Power Supply: 120 V ~ 60 Hz
Power Consumption: 8 Watts
iPhone is a trademark of Apple Inc.
iPod is a trademark of Apple Inc.,
registered in the U.S. and other
countries.
Apple is not responsible for the
operation of this device or its
compliance with safety and regulatory
standards.
“Made for iPod” means that an
electronic accessory has been designed
to connect specifi cally to iPod and has
been certifi ed by the developer to meet
Apple performance standards.
“Works with iPhone” means that an
electronic accessory has been designed
to connect specifi cally to iPhone and has
been certifi ed by the developer to meet
Apple performance standards.
This equipment is a Class II
or double insulated electrical
appliance. It has been designed
in such a way that it does not
require a safety connection to
electrical earth.
FCC information
This equipment has been tested and
found to comply with the limits for
a Class B digital device, pursuant to
Part 15 of FCC Rules. These limits
are designed to provide reasonable
protection against harmful interference
in a residential installation. This
equipment generates, uses, and can
radiate radio frequency energy and, if
not installed and used in accordance
with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee
that interference will not occur in a
particular installation. If this equipment
does cause harmful interference to
radio or television reception, which
can be determined by turning the
equipment off and on, the user is
encouraged to try to correct the
interference by one or more of the
following measures:
Reorient or relocate the receiving
antenna.
Increase the separation between the
equipment and receiver.
Connect the equipment into an
outlet on a circuit different from
that to which the receiver is
connected.
Consult the dealer or an
experienced radio/TV technician for
help.
Modifi cations not expressly approved
by the party responsible for compliance
could void the user’s authority to
operate the equipment.
This Class B digital apparatus
complies with Canadian ICES-003.
Cet appareil numérique de la class
B est conforme à la norme NMB-003
du Canada.
Audiovox Electronics Corp.
150 Marcus Blvd., Hauppauge, NY 11788
©2010 Audiovox Electronics Corp.
Trademark(s) ® Registered
Printed in China
Limited warranty
12 Month Limited Warranty
Applies to RCA Audio/Video
Products
AUDIOVOX ELECTRONICS CORP. (the
Company) warrants to the original retail
purchaser of this product that should
this product or any part thereof, under
normal use and conditions, be proven
defective in material or workmanship
within 12 months from the date of
original purchase, such defect(s) will be
repaired or replaced with reconditioned
product (at the Company’s option)
without charge for parts and repair
labor.
To obtain repair or replacement
within the terms of this Warranty, the
product is to be delivered with proof
of warranty coverage (e.g. dated bill
of sale), specifi cation of defect(s),
transportation prepaid, to the Company
at the address shown below.
This Warranty does not extend to the
elimination of externally generated
static or noise, to correction of
antenna problems, loss/interruptions of
broadcast or internet service, to costs
incurred for installation, removal or
reinstallation of product, to corruptions
caused by computer viruses, spyware or
other malware, to loss of media, fi les,
data or content, or to damage to tapes,
discs, removable memory devices or
cards, speakers, accessories, computers,
computer peripherals, other media
players, home networks or vehicle
electrical systems.
This Warranty does not apply to any
product or part thereof which, in the
opinion of the Company, has suffered
or been damaged through alteration,
improper installation, mishandling,
misuse, neglect, accident, or by removal
or defacement of the factory serial
number/bar code label(s). THE EXTENT
OF THE COMPANY’S LIABILITY UNDER
THIS WARRANTY IS LIMITED TO THE
REPAIR OR REPLACEMENT PROVIDED
ABOVE AND, IN NO EVENT, SHALL THE
COMPANY’S LIABILITY EXCEED THE
PURCHASE PRICE PAID BY PURCHASER
FOR THE PRODUCT.
This Warranty is in lieu of all other
express warranties or liabilities. ANY
IMPLIED WARRANTIES, INCLUDING
ANY IMPLIED WARRANTY OF
MERCHANTABILITY, SHALL BE LIMITED
TO THE DURATION OF THIS WRITTEN
WARRANTY. ANY ACTION FOR BREACH
OF ANY WARRANTY HEREUNDER
INCLUDING ANY IMPLIED WARRANTY
OF MERCHANTABILITY MUST BE
BROUGHT WITHIN A PERIOD OF 24
MONTHS FROM DATE OF ORIGINAL
PURCHASE. IN NO CASE SHALL THE
COMPANY BE LIABLE FOR ANY
CONSEQUENTIAL OR INCIDENTAL
DAMAGES FOR BREACH OF THIS OR
ANY OTHER WARRANTY. No person or
representative is authorized to assume
for the Company any liability other than
expressed herein in connection with the
sale of this product.
Some states do not allow limitations on
how long an implied warranty lasts or
the exclusion or limitation of incidental
or consequential damage so the above
limitations or exclusions may not apply
to you. This Warranty gives you specifi c
legal rights and you may also have
other rights which vary from state to
state.
How to make a warranty claim:
If your product is capable of storing
content (such as an mp3 player,
digital voice recorder, etc), it is
recommended to make periodic
backup copies of content stored
on the product. If applicable,
before shipping a product, make
a back up copy of content or data
stored on the device. Also, it is
advisable to remove any personal
content which you would not want
exposed to others. IT IS LIKELY
THAT CONTENTS AND DATA ON
THE DEVICE WILL BE LOST DURING
SERVICE AND REFORMATTING.
AUDIOVOX ACCEPTS NO LIABILITY
FOR LOST CONTENT OR DATA,
OR FOR THE SECURITY OF ANY
PERSONAL CONTENT OR DATA ON
THE RETURNED DEVICE. Product
will be returned with factory
default settings, and without any
pre-loaded content which may have
been installed in the originally
purchased products. Consumer will
be responsible for reloading data
and content. Consumer will be
responsible to restore any personal
preference settings.
Properly pack your unit. Include
any remotes, memory cards, cables,
etc. which were originally provided
with the product. However DO NOT
return any removable batteries,
even if batteries were included
with the original purchase. We
recommend using the original
carton and packing materials.
Include evidence of purchase date
such as the bill of sale. Also print
your name and address and a
description of the defect. Send via
standard UPS or its equivalent to:
Audiovox Electronics Corp.
Attn: Service Department.
150 Marcus Blvd.
Hauppauge N.Y. 11788
1-877-833-3491
Insure your shipment for loss or
damage. Audiovox accepts no
liability in case of damage or loss en
route to Audiovox.
Pay any charges billed to you by
the Exchange Center for service not
Warranty information
covered by the warranty.
A new or refurbished unit will be
shipped to you freight prepaid.
What we will do:
Provide you with a new, or at our
option, a refurbished unit. The
exchange unit is under warranty for
the remainder of the original product’s
warranty period.
For Canada Customers, please ship
to:
Audiovox Return Centre
c/o Genco
6685 Kennedy Road,
Unit#3, Door 16,
Mississuaga, Ontario
L5T 3A5
Power is fed to the unit even
when it is not functioning. To
cut the power supply off, the
power cable must be unplugged.
Illustrations contained within this
publication are for representation only
and subject to change.
The descriptions and characteristics
given in this document are given as
a general indication and not as a
guarantee. In order to provide the
highest quality product possible,
we reserve the right to make any
improvement or modifi cation without
prior notice.
AM loop antenna socket – Connect to
the AM loop antenna
AUX IN – Auxiliary input jack
Off (standby mode)
Sound source selection
with light indicators
Display
Adjust
volume
Works with:
iPhone 3GS 16GB, 32GB
iPhone 3G 8GB, 16GB
Made for:
iPod touch 2nd generation 8GB,
16GB, 32GB
iPod touch 1st generation 8GB,
16GB, 32GB
iPod nano 5th generation 8GB
or 16GB
iPod nano 4th generation
(video) 8GB, 16GB
iPod nano 3rd generation
(video) 4GB, 8GB
iPod classic 80GB, 160GB
iPod nano 2nd generation
(aluminum) 2GB, 4GB, 8GB
iPod nano 1GB, 2GB or 4GB
iPod 5th generation (video)
30GB, 60GB, 80GB
iPod mini 4GB, 6GB
iPod 4th generation 40GB
iPod 4th generation (color
display) 20GB, 30GB, 40GB, 60GB
Alkaline (NEDA 1604A/
IEC 6LR61) battery is
recommended. Carbon-zinc
battery may be used but memory
holding time will be substantially
reduced. Memory holding time
for a fresh alkaline battery is
approximately 8 hours (if radio
or alarm are not operated) which
should take care of short, nuisance-
type AC power failures. To preserve
battery life, the unit should remain
plugged into an AC outlet. As the
battery gets older, its voltage drops
and memory may be lost. Be sure
to replace the battery periodically.
Battery should be removed if the
unit will be stored for more than
one month. Leaky battery can
badly damage the clock radio.
Power failure indicator
When AC power is interrupted
(disconnected) for a short period of
time, both time and alarm settings
will change (unless batteries are
installed). After AC power is restored
(reconnected), the Digital Display
will blink to indicate that power was
interrupted and you should readjust the
time and alarm settings.

Do you have a question about the audiovox RC60i?

If you have a question about the "audiovox RC60i", don't hesitate to ask. Make sure to describe your problem clearly, this way other users are able to provide you with the correct answer.

Buy related products:

Product specifications

Audio
RMS rated power   -
Other features
Backlight   yes
Ports & interfaces
Headphone outputs   -
Design
Product colour   Black
Performance
Apple docking compatibility   iPhone, iPod

Related products: