Alpine CDE-110C

Alpine CDE-110C manual

(1)
  • Adjusting Bass Level/Treble Level/
    Balance (Between Left and Right)/Fader
    (Between Front and Rear)
    1
    Press Rotary encoder (AUDIO) repeatedly to
    choose the desired mode.
    Each press changes the mode as follows:
    BASS TREBLE BALANCE FADER Return to normal
    mode
    Bass: -12 ~ +12dB
    Treble: -12 ~ +12dB
    Balance : L15 ~ R15
    Fader : R15 ~ F15
    If no operation is performed for 5 seconds after selecting the BASS,
    TREBLE, BALANCE or FADER mode, the unit automatically returns
    to normal mode.
    2
    Turn the Rotary encoder until the desired sound is
    obtained in each mode.
    Equalizer Presets (Factory’s EQ)
    6 typical equalizer settings are preset at the factory for a variety of
    musical source material.
    Press SOUND repeatedly until the desired Factory’s EQ
    type is displayed.
    With each press of the button, the equalizer mode will display
    the selected equalizer characteristic.
    FLAT(OFF) ROCK POP JAZZ VOCAL CLUB
    FLAT(OFF)
    Sound Setting
    SOUND
    Rotary encoder (AUDIO)
    Supported playback sampling rates and bit rates
    MP3
    WMA
    This device may not play back correctly depending on sampling
    rates.
    ID3 tags/WMA tags
    This device supports ID3 tag and WMA tag.
    If tag data is in an MP3/WMA file, this device can display
    the title (track title), artist name, and album name ID3 tag/WMA
    tag data.
    This device can only display up to 64 characters. (Unicoded file
    and folder names are up to 32 characters.)
    For non-supported characters and symbols an asterisk is
    displayed.
    If information contains characters other than ID3 tag information,
    the aud
    io file may not be played back.
    The tag information may not be correctly displayed, depending
    on the contents.
    Producing MP3/WMA discs
    MP3/WMA files are prepared, then written to a CD-R or
    CD-RW using CD-R writing software. A disc can hold up to 255
    files/folders (including Root Folders), and the maximum number
    of folders is 255.
    Playback may not be performed if a disc exceeds the limitations
    described above.
    Media supported
    The media that this device can play back are CD-ROMs, CD-Rs,
    and CD-RWs.
    Corresponding File Systems
    This device supports disc
    s formatted with ISO9660 Level 1 or
    Level 2.
    This device also can play back discs in Joliet, Romeo, etc., and
    other standards that conform to ISO9660. However, sometimes
    the file names, folder names, etc., are not displayed correctly.
    Formats supported
    This device supports Multi-Session.
    This device cannot correctly play back discs recorded with
    Track At Once or packet writing.
    Apple HFS, UDF 1.50, Mixed Mode CD and Enhanced CD (CD-
    Extra) are not supported.
    Order of files
    Files are played back in the order that the writing software writes
    them to the disc. Therefore, the playback order ma
    y not be what
    is expected. Verify the writing order in the software’s
    documentation. The playback order of the folders and files is as
    follows.
    * The folder No./ folder Name will not be displayed if no file is
    contained in the folder.
    Bit rate
    This is the “sound” compression rate specified for encoding. The
    higher the bit rate, the higher the sound quality, but also the larger
    the files.
    Sampling rate
    This value shows how many times per second the data is sampled
    (recorded). For example, music CDs use a sampling
    rate of 44.1 kHz,
    so the sound is sampled (recorded) 44,100 times per second. The
    higher the sampling rate, the higher the sound quality, but also the
    larger the volume of data.
    Encoding
    Converting music CDs, WAVE (AIFF) files, and other sound files into
    the specified audio compression format.
    Tag
    Song information such as track titles, artist names, album names,
    etc., written into MP3/WMA files.
    Root folder
    The root folder (or root directory) is found at the top of the file
    system. The root
    folder contains all folders and files. It is created
    automatically for all burned discs.
    Sampling rates: 48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz,
    16 kHz, 12 kHz, 11.025 kHz, 8 kHz
    Bit rates 8 - 320 kbps
    Sampling rates: 48 kHz, 44.1 kHz, 32 kHz
    Bit rates: 64 - 160 kbps
    Under the ISO9660 standard, there are some restrictions to
    remember.
    The maximum nested folder depth is 8 (including the root
    directory). The number of characters for a folder/file name is
    limited.
    Valid characters for folder/file names are letters A-Z, a-z,
    numbers 0-9 and symbols.
    Terminology
    Root folder
    Folder MP3/WMA File
    Playback
    1
    Insert a disc with the label side facing up.
    The disc will be pulled into the unit automatically, and the
    DISC IN” indicator lights up .
    When a disc is already inserted, press SOURCE/ to
    switch to the DISC mode.
    The mode will change every time the button is pressed.
    RADIO CD
    *
    1
    USB
    *
    2
    AUX RADIO
    *
    1
    Displayed only when a disc has been inserted.
    *
    2
    Displayed only when USB memory is connected.
    2
    While playing back MP3/WMA, press or
    to select the desired folder.
    3
    Press or to select the desired track (file).
    Returning to the beginning of the current track (le):
    Press .
    Fast backward:
    Press and hold .
    Advancing to the beginning of the next track (file):
    Press .
    Fast forward:
    Press and hold .
    4
    To pause playback, press
    BAND/ /
    .
    Pressing BAND/ / again will resume playback.
    5
    To eject the disc, press .
    Do not remove a CD during its eject cycle. Do not load more than
    one disc at a time. A malfunction may result from doing either.
    The “ DISC IN” indicator lights up wh
    en a disc is inserted.
    Three-inch (8 cm) CDs cannot be used.
    The CD-player can play discs containing audio data, MP3 data,
    and WMA data.
    WMA format files that are protected by DRM (Digital Rights
    Management).
    The track display for MP3/WMA data playback is the file
    numbers recorded on the disc.
    The playback time may not be correctly displayed when a VBR
    (Variable Bit Rate) recorded file is played back.
    MP3/WMA Play Display
    The folder number and file number will be displayed as
    described below.
    Press VIEW to swi
    tch the display. See “Displaying the Text” for
    information about display switching.
    Repeat Play
    Press 6(RPT) to repeatedly play back the current track.
    The “ RPT” indicator lights up, and the track (file) will be
    played repeatedly.
    Press 6(RPT) again to cancel.
    Folder Repeat Play (MP3/WMA)
    Press and hold 6(RPT) for at least 2 seconds.
    The “ FOLDER” and RPT” indicators appear in the
    display, and only files in the current folder are repeatedly played
    back.
    Press and hold 6(RPT) again to cancel.
    CD/MP3/WMA
    6(RPT)
    SOURCE/
    BAND/ /
    5(SCAN)
    4(M.I.X.)
    003–002
    Folder number
    display
    File number
    display
    Listening to Radio
    1
    Press SOURCE/ to select RADIO mode.
    2
    Press
    BAND/ /
    repeatedly until the desired radio
    band is displayed.
    FM1 FM2 FM3 AM FM1
    3
    Press or to tune in the desired station.
    Press and hold or for at least 0.5 seconds to seek
    station.
    Presetting Stations Manually
    1
    Select the radio band and tune in a desired radio
    station you wish to store in the preset memory.
    2
    Press and hold, for at least 2 seconds, any one of the
    preset buttons (1 through 6) into which you wish
    to store the station.
    The selected station is stored.
    The display shows the band, preset number and station
    frequency memorized.
    A total of 24 stations can be stored in the preset memory (6 stations
    for each band; FM1, FM2, FM3 and AM).
    If you store a station in a preset m
    emory which already has a station,
    the current station will be cleared and replaced with the new station.
    Presetting Stations Automatically
    1
    Press
    BAND/ /
    repeatedly until the desired radio
    band is displayed.
    2
    Press and hold A.ME for at least 2 seconds.
    The frequency on the display continues to change while the
    automatic memory is in progress. The tuner will
    automatically seek and store 6 strong stations in the
    selected band. They will be stored into preset buttons 1 to 6
    in order of signal strength.
    If no stations are stored, the tuner will return to the original station
    you were listening to before the auto memory
    procedure began.
    Tuning to Preset Stations
    1
    Press
    BAND/ /
    repeatedly until the desired band
    is displayed.
    2
    Press any one of the station preset buttons
    (1 through 6) that has your desired radio station in
    memory.
    The display shows the band, preset number and frequency
    of the station selected.
    Radio
    BAND/ /
    A.ME
    Preset buttons
    (1 through 6)
    SOURCE/
    may result in malfunction.
    Accessory List
    Head unit ...................................................................1
    Power cable...............................................................1
    Mounting sleeve.........................................................1
    Carrying case.............................................................1
    Bracket key................................................................2
    Rubber Cap ...............................................................1
    Bolt Stud ........................
    ...........................................1
    Owner’s Manual ........................................................1 set
    Turning Power On and Off
    Press SOURCE/ to turn on the unit.
    The first time power is turned on, the volume will start from level 18.
    Press and hold SOURCE/ for at least 2 seconds to
    turn off the unit.
    Detaching and Attaching the Front Panel
    Detaching
    1
    Turn off the unit power.
    2
    Press (Release) at the upper right side until the
    front panel pops out.
    3
    Grasp the right side of the front panel and pull it out.
    The front panel may become hot in normal usage (especially the
    connector terminals on the back of the front panel). This is not a
    malfunction.
    To protect the front panel, place it in the supplied carrying case.
    When detaching the front panel, do not apply excessive force as it
    Attaching
    1
    Insert the left side of the front panel into the main
    unit. Align the groove on the front panel with the
    projections on the main unit.
    2
    Push the right side of the front panel until it locks
    rmly into the main unit.
    Before attaching the front panel, make sure that there is no dirt or
    dust on the connector terminals and no foreign object between the
    front panel and the main unit.
    Attach the front panel carefully, holding the sides of the front panel to
    avoid pushing
    buttons by mistake.
    Adjusting Volume
    Turn the Rotary encoder until the desired sound is
    obtained.
    Adjusting Volume : 0 ~ 40
    Setting Time
    1
    Press and hold VIEW for at least 2 seconds.
    The hour indication will blink.
    2
    Press or to adjust the hours while the
    time indication is blinking.
    3
    When the hour has been adjusted, press VIEW.
    The Minute indication will blink.
    4
    Press or to adjust the minutes while the
    time indication is blinking.
    5
    When the minute has been adjusted, press VIEW.
    The setting time mode is completed.
    Hold down or to change numbers rapidly.
    Getting Started
    VIEW
    SOURCE/
    Rotary encoder
    Controllable with Remote Control
    This unit can be controlled with an optional Alpine
    remote control. For details, consult your Alpine dealer.
    Point the optional remote control transmitter at the
    remote-control sensor.
    Remote control sensor
    Operating Instructions
    DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR
    ATTENTION AWAY FROM SAFELY DRIVING YOUR VEHICLE.
    Any function that requires your prolonged attention should only be
    performed after coming to a complete stop. Always stop the vehicle
    in a safe location before performing these functions. Failure to do
    so may result in an accident.
    KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL
    HEAR OUTSIDE NOISES WHILE DRIVING.
    Excessive volume levels that obscure sounds such as emergency
    vehicle sirens or road warning signals (train crossings, etc.) can be
    dangerous and may result in an accident. LISTENING AT LOUD
    VOLUME LEVELS IN A CAR MAY ALSO CAUSE HEARING
    DAMAGE.
    MINIMIZE DISPLAY VIEWING WHILE DRIVING.
    Viewing the display may distract the driver from looking ahead of
    the vehicle and cause an accident.
    DO NOT DISASSEMBLE OR ALTER.
    Doing so may result in an accident, fire or electric shock.
    USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.
    (Check with your dealer if you are not sure.) Failure to do so may
    result in fire, etc.
    KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE
    REACH OF CHILDREN.
    Swallowing them may result in serious injury. If swallowed,
    consult a physician immediately.
    USE THE CORRECT AMPERE RATING WHEN REPLACING
    FUSES.
    Failure to do so may result in fire or electric shock.
    DO NOT BLOCK VENTS OR RADIATOR PANELS.
    Doing so may cause heat to build up inside and may result in fire.
    USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.
    Use for other than its designed application may result in fire,
    electric shock or other injury.
    DO NOT PLACE HANDS, FINGERS OR FOREIGN OBJECTS IN
    INSERTION SLOTS OR GAPS.
    Doing so may result in personal injury or damage to the product.
    HALT USE IMMEDIATELY IF A PROBLEM APPEARS.
    Failure to do so may cause personal injury or damage to the
    product. Return it to your authorized Alpine dealer or the nearest
    Alpine Service Centre for repairing.
    PRECAUTIONS
    Product Cleaning
    Use a soft dry cloth for periodic cleaning of the product. For more
    severe stains, please dampen the cloth with water only. Anything
    else has the chance of dissolving the paint or damaging the plastic.
    Temperature
    Be sure the temperature inside the vehicle is between +55°C
    (+131°F) and –10°C (+14°F) before turning your unit on.
    Moisture Condensation
    You may notice the CD playback sound wavering due to
    condensation. If this happens, remove the disc from the player and
    wait about an hour for the moisture to evaporate.
    Damaged Disc
    Do not attempt to play cracked, warped, or damaged discs. Playing
    a bad disc could severely damage the playback mechanism.
    Maintenance
    If you have problems, do not attempt to repair the unit yourself.
    Return it to your Alpine dealer or the nearest Alpine Service
    Station for servicing.
    WARNING
    WARNING
    This symbol means important instructions.
    Failure to heed them can result in serious injury
    or death.
    CAUTION
    This symbol means important instructions.
    Failure to heed them can result in injury or
    material property damage.
    EN
    1 2 3 4 5
    6 7 8 9 10
    MP3/*WMA/CD Receiver
    CDE-110/CDE-110C
    CDE-110E/CDE-110UB
    ALPINE ELECTRONICS OF ASIA PACIFIC CO.,LTD.
    555 Rasa Tower 1, Unit 2601-2602, 26th Floor,
    Phaholyothin Road, Chatuchak, Chatuchak, Bangkok 10900, Thailand
    Phone 02-937-0505
    www.alpine-asia.com
    R
    OWNER’S MANUAL
    Please read before using this equipment.
    recorded under unstable conditions, CDs on which a recording
    failed or a re-recording was attempted, copy-protected CDs
    which do not conform to the audio CD industry standard.
    Use discs with MP3/WMA files written in a format
    compatible with this unit. For details, see “About MP3/WMA”.
    ROM data other than audio files contained in a disc will not
    produce sound when played back.
    Protecting the USB connection terminal
    Only a USB memory can be connected to the USB connection
    terminal on this unit. Correct performance using other USB
    products cannot be guaranteed. A USB hub is not supported.
    Do not connect a USB memory over 20 mm wide. Also, avoid
    connecting USB memory and Front Aux at the same time.
    If a USB device is inserted in the unit, it projects out and may be
    a danger while driving. Use a commercially available USB
    standard extension cable, and connect it in a safe way.
    Depending on the connected U
    SB memory device, the unit may
    not function or some functions may not be performed.
    The audio file format that can be played back on the unit is
    MP3/WMA.
    Artist/song name, etc., can be displayed, however characters
    may not be correctly displayed.
    Change SOURCE to something other than USB, then remove the
    USB device to prevent possible damage to its memory.
    Windows Media and the Windows logo are trademarks, or
    registered trademarks of Microsoft Corporation in the United
    States and/or other countries.
    “MPEG Layer-3 audio coding technology licensed from
    Fraunhofer IIS and Thomson.
    “Supply of this product only conveys a license for private,
    non-commercial use and does not convey a license nor imply
    any right to use this product in any commercial (i.e. revenue-
    generation) real time broadcasting (terrestrial, satellite, cable
    and/or any other media), broadcasting/streaming via internet,
    intranets
    and/or other networks or in other electronic content
    distribution systems, such as pay-audio or audio-on-demand
    applications. An independent license for such use is required.
    For details, please visit http://www. mp3licensing.com”
    On handling Compact Discs (CD/CD-R/CD-RW)
    Do not touch the surface.
    Do not expose the disc to direct sunlight.
    Do not affix stickers or labels.
    Clean the disc when it is dusty.
    Make sure that there are no bumps around the disc.
    Do not use commercially available disc accessories.
    Do not leave the disc in the car or the unit for a long time. Never
    expose the disc to direct sunlight. Heat and humidity may damage
    the CD and you may not be able to play it again.
    To customers using CD-R/CD-RW
    If a CD-R/CD-RW cannot be played back, make sure the last
    recording session was closed (finalized).
    Finalize the CD-R/CD-RW if necessary, and attempt playback
    again.
    About media that can be played
    Use only compact discs with the label side showing the CD logo
    marks below.
    If you use unspecified compact discs, correct performance cannot
    be guaranteed.
    You can play CD-Rs (CD-Recordables)/CD-RWs (CD-
    ReWritables) which have been recorded only on audio devices.
    You can also play CD-Rs/CD-RWs containing MP3/WMA
    formatted audio files.
    Some of the following CDs may not play on this unit:
    Flawed CDs, CDs with fingerprints, CDs exposed to extreme
    temperatures or sunlight (e.g., left in the car or this unit), CDs
    On Handling USB Memory
    To prevent malfunction or damage, note the following points.
    Read the USB memory Owner’s Manual thoroughly.
    Do not touch the terminals by hand or metal.
    Do not subject USB memory to excessive shock.
    Do not bend, drop, disassemble, modify or soak in the water.
    Avoid usage or storage in the following locations:
    Anywhere in the car exposed to direct sunlight or high
    temperatures.
    Anywhere the possibility of high humidity or corrosive
    substances are present.
    Fix the USB memory in a location where driver operatio
    n will
    not be hindered.
    USB memory may not function correctly at high or low temperature
    The USB flash memory supports a maximum of 4 GB per partition.
    The unit recognizes only one partition.
    Use only certified USB memory. Note that even certified USB
    memory, may not function correctly depending on its type or state.
    USB memory function is not guaranteed. Use USB memory
    according to the terms of agreement.
    Depending on the settings of the USB memory type, memory
    state or encoding software, the unit may not play back or display
    properly.
    A file that is copy-protected (copyright protection) cannot be
    played back.
    USB
    memory may take time to start playback. If there is a
    particular file other than audio in the USB memory, it may take
    considerable time before the le is played back or searched.
    The unit can play back “mp3”, “wma” or “m4a” file extensions.
    Do not add the above extensions to a file other than audio data.
    This non-audio data will not be recognised. The resulting playback
    may contain noise that can damage speakers and/or amplifiers.
    It is recommended to back up important data on a personal computer.
    Do not remove the USB device while playback is in progress.
    CAUTION
    Alpine accepts no responsibility for lost data, etc., even if data, etc.
    is lost while using this product.
    Never Attempt the Following
    Do not grip or pull out the disc while it is being pulled back into the
    player by the automatic reloading mechanism.
    Do not attempt to insert a disc into the unit when the unit power is
    off.
    Inserting Discs
    Your player accepts only one disc at a time for playback. Do not
    attempt to load more than one disc.
    Make sure the label side is facing up when you insert the disc.
    Playing a disc while driving on a very bumpy road may result in
    skips, but this will not scratch the disc or damage the player.
    New Discs
    To prevent the CD from jamming, the LCD is displayed as error if
    discs with irregular surfaces are inserted or if discs are inserted
    incorrectly. When a new disc is ejected immediately after initial
    loading, use your finger to feel around the inside of the centre hole
    and outside edge of the disc. If you feel any small bumps or
    irregularities, this could inhibit proper loading of the disc. To
    remove the bumps, rub the inside edge of the hole and outside edge
    of the disc with a ballpoint pen or other such instrume
    nt, then insert
    the disc again.
    Irregular Shaped Discs
    Be sure to use round shape discs only for this unit and never use
    any special shape discs.
    Use of special shape discs may cause damage to the mechanism.
    Installation Location
    Make sure this unit will not be installed in a location subjected to:
    Direct sun and heat
    High humidity and water
    Excessive dust
    Excessive vibrations
    Correct Handling
    Do not drop the disc while handling. Hold the disc so you will not
    leave fingerprints on the surface. Do not affix tape, paper, or
    gummed labels to the disc. Do not write on the disc.
    Disc Cleaning
    Fingerprints, dust, or soil on the surface of the disc could cause the
    CD player to skip. For routine cleaning, wipe the playing surface
    with a clean, soft cloth from the centre of the disc to the outer edge.
    If the surface is heavily soiled, dampen a clean, soft cloth in a
    solution of mild neutral detergent before cleaning the disc.
    Disc Accessories
    There are various accessories available on the market for protecting
    the disc surface and improving sound quality. However, most of
    them will influence the thickness and/or diameter of the disc. Using
    such accessories can cause the disc to be out of standard
    specications and may create operational problems. We
    recommend not using these accessories on discs played in Alpine
    CD players.
    Centre Hole
    Bumps
    Centre Hole
    New Disc
    Outside
    (Bumps)
    CORRECT
    INCORRECT CORRECT
    Transparent Sheet Disc Stabilizer
    M.I.X. (Random Play)
    Press 4(M.I.X.) in the play mode.
    The “ M.I.X.” indicator lights up, and the tracks (files) on the
    disc will be played back in random sequence.
    Press 4(M.I.X.) again to cancel.
    Folder M.I.X. (Random Play) (MP3/
    WMA)
    Press and hold 4(M.I.X.) for at least 2 seconds.
    The FOLDER” and “ M.I.X.” indicators appear in the
    display, and all files in the current folder are played back in
    random sequence.
    Press and hold 4(M.I.X.) again to cancel.
    Scanning Programs
    Press 5(SCAN) to activate the scan mode.
    The first 10 seconds of each track (file) will be played back in
    succession.
    Press 5(SCAN) again to cancel.
    Folder Scanning Programs (MP3/WMA)
    Press and hold 5(SCAN) for at least 2 seconds.
    From the next folder, therst 10 seconds of therst file in each
    folder is played back in sequence.
    Press and hold 5(SCAN) again to cancel.
    About MP3/WMA
    What is MP3?
    MP3, whose official name is “MPEG-1 Audio Layer 3,” is a
    compression standard prescribed by the ISO, the International
    Standardization Organization and MPEG which is a joint activity
    institution of the IEC.
    MP3 files contain compressed audio data. MP3 encoding is
    capable of compressing audio data at extremely high ratios,
    reducing the size of music files to as much as one-tenth their
    original size. This is achieved while still maintaining near CD
    quality. The MP3 format realises such high compression ratios
    by eliminating the sounds that are either inaudible to the human
    ear or ma
    sked by other sounds.
    What is WMA?
    WMA, or “Windows Media™ Audio,” is compressed audio data.
    WMA is similar to MP3 audio data and can achieve CD quality
    sound with small file sizes.
    Method for creating MP3/WMAles
    Audio data is compressed using software with MP3/WMA
    codecs. For details on creating MP3/WMA files, refer to the
    user’s manual for that software.
    MP3/WMA files that are playable on this device have the
    le extensions “mp3” / “wma” Files with no extension
    cannot be played back (WMA ver. 7-9 are supported). Protected
    files are not supported.
    CAUTION
    Except for private use, duplicating audio data (including
    MP3/WMA data) or distributing, transferring, or copying it,
    whether for free or for a fee, without permission of the copyright
    holder is strictly prohibited by the Copyright Act and by
    international treaty.
    Displaying the Text
    Text information, such as the disc name and the track name, will be
    displayed if playing a CD text compatible disc. It is also possible to
    display the folder name, the file name and the tag, etc., while playing
    MP3/WMA files.
    Press VIEW.
    The display will change every time the button is pressed.
    To scroll text, press 3(SCROLL).
    The display in Radio mode:
    FREQUENCY CLOCK FREQUENCY
    The display in CD mode:
    TRACK NO./ELAPSED TIME TEXT (DISC NAME)
    *
    1
    TEXT
    (TRACK NAME)
    *
    1
    CLOCK TRACK NO./ELAPSED TIME
    The display in MP3/WMA mode:
    FOLDER NO./FILE NO. ELAPSED TIME FOLDER NAME
    FILE NAME ALBUM NAME
    *
    2
    SONG NAME
    *
    2
    /ARTIST
    NAME *
    2
    CLOCK FOLDER NO./FILE NO.
    The display in AUX mode:
    AUX IN CLOCK AUX IN
    *
    1
    Displayed during playback of a disc with CD text.
    *
    2
    ID3 tag/WMA tag
    If an MP3/WMA file contains ID3 tag/WMA tag information,
    the ID3 tag/WMA tag information is displayed (e.g., song name,
    artist name, and album name). All other tag data is ignored.
    About “Text”
    Text:
    Text compatible CDs contain text information such as the disc
    name and track name. Such text information is referred to as
    “text.
    Some characters may not be displayed correctly with this device,
    depending on the character type.
    “NO TEXT” is displayed if text information cannot be displayed on
    this unit.
    The text or tag information may not be correctly displayed,
    depending on the contents.
    Displaying Time
    Press VIEW repeatedly until the time is displayed.
    Each press changes the display.
    For details, see “Displaying the Text”.
    Selecting any radio or CD function while in the clock priority mode
    will interrupt the time display momentarily. The function selected
    will be displayed for about 5 seconds before the time returns to the
    display.
    Using the Front AUX Input Terminal
    Connect a portable music player, etc. by simply connecting it to the
    input on the front panel. An optional adapter cable is required (standard
    RCA to 3.5ø mini-phono plug or 3.5ø to 3.5ø mini phono plug).
    Press SOURCE/ , and select the AUX mode to listen to
    the portable device.
    RADIO CD
    *
    1
    USB
    *
    2
    AUX RADIO
    *
    1
    Displayed only when a disc has been inserted.
    *
    2
    Displayed only when USB memory is connected.
    Other Functions
    VIEW
    SOURCE/
    3(SCROLL)
    Portable player, etc.
    Main unit
    Optional adapter cable (RCA pin
    plugs [red, white] 3.5ø miniplugs)
    or (3.5ø miniplugs)
    or
    Note
    * CDE-110UB does not support WMA.
    Note
    * CDE-110UB does not support WMA.
    ALPINE ELECTRONICS MARKETING, INC.
    1-1-8 Nishi Gotanda,
    Shinagawa-ku,
    Tokyo 141-0031, Japan
    Phone 03-5496-8231
    ALPINE ELECTRONICS OF AMERICA, INC.
    19145 Gramercy Place, Torrance,
    California 90501, U.S.A.
    Phone 1-800-ALPINE-1 (1-800-257-4631)
    ALPINE ELECTRONICS OF CANADA, INC.
    777 Supertest Road, Toronto,
    Ontario M3J 2M9, Canada
    Phone 1-800-ALPINE-1 (1-800-257-4631)
    ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.
    161-165 Princes Highway, Hallam
    Victoria 3803, Australia
    Phone 03-8787-1200
    ALPINE ELECTRONICS GmbH
    Wilhelm-Wagenfeld-Str. 1-3, 80807 München, Germany
    Phone 089-32 42 640
    ALPINE ELECTRONICS OF U.K. LTD.
    Alpine House
    Fletchamstead Highway, Coventry CV4 9TW, U.K.
    Phone 0870-33 33 763
    ALPINE ELECTRONICS FRANCE S.A.R.L.
    (RCS PONTOISE B 338 101 280)
    98, Rue de
    la Belle Etoile, Z.I. Paris Nord Il,
    B.P. 50016, 95945 Roissy Charles de Gaulle
    Cedex, France
    Phone 01-48638989
    ALPINE ITALIA S.p.A.
    Viale C. Colombo 8, 20090 Trezzano
    Sul Naviglio (MI), Italy
    Phone 02-484781
    ALPINE ELECTRONICS DE ESPAÑA, S.A.
    Portal de Gamarra 36, Pabellón, 32
    01013 Vitoria (Alava)-APDO 133, Spain
    Phone 945-283588
    ALPINE ELECTRONICS (BENELUX) GmbH
    Leuvensesteenweg 510-B6,
    1930 Zaventem, Belgium
    Phone 02-725-13 15
    *CDE-110UB does not support WMA
Alpine CDE-110C

Need help?

Number of questions: 0

Do you have a question about the Alpine CDE-110C or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Alpine CDE-110C owners to properly answer your question.

View the manual for the Alpine CDE-110C here, for free. This manual comes under the category Car Radios and has been rated by 1 people with an average of a 7.1. This manual is available in the following languages: English. Do you have a question about the Alpine CDE-110C or do you need help? Ask your question here

Alpine CDE-110C specifications

General
Brand Alpine
Model CDE-110C
Product Car Radio
Language English
Filetype PDF

Frequently Asked Questions

Below, you will find the most frequently asked questions about the Alpine CDE-110C.

Is your question not listed? Ask your question here

ManualSearcher.com

Looking for a manual? ManualSearcher.com ensures that you will find the manual you are looking for in no time. Our database contains more than 1 million PDF manuals from more than 10,000 brands. Every day we add the latest manuals so that you will always find the product you are looking for. It's very simple: just type the brand name and the type of product in the search bar and you can instantly view the manual of your choice online for free.

ManualSearcher.com

© Copyright 2020 ManualSearcher.com. All Rights Reserved.

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

Read more