7inova 7R200

7inova 7R200 manual

(1)
  • Multimedia sharing
    Currently connected to:
    7inova_535060
    Wi-Fi
    7inova-535060
    7inova-535050
    Disconnect
    Connected
    7inova-521635
    Open Network and Sharing Center
    Click“Start→Control Panel→Network and Internet→Network and Sharing Center→Change
    adapter settings→Wi-Fi(right click)→Properties”
    Double click“Internet Protocol Version 4(TCP/IPv4)”
    Select “Obtain an IP address automatically” and “Obtain DSN server address automatically”.
    Click “OK”. Back to the last interface and click “OK”
    1.
    2.
    3.
    When shows:“Connected”,
    means your computer has
    connected to wireless
    network successfully.
    3
    Please click on the steps to set up Windows 7 system
    Windows 7
    (Note: You have to get device connected wirelessly firstly then can login Web browser)
    Connect To Wireless Network
    2
    Select the SSID of your target
    network from the displayed list
    and click“Connect”
    2
    After Wireless LAN card
    installed successfully,
    click icon on the lower
    right corner of desktop.
    1
    (Before configuring, first ensure your PC has installed wireless LAN card)
    Computer Configuration
    1
    1) Restore the 7R200’s configuration to its factory default settings. (With 7R200 powered on,
    press and hold the Reset button for about 10 seconds before releasing it).
    2) To log in the Web Management page, use the default user name and password: admin,
    admin. To connect to the Wireless Network, use the default password on the label.
    3) Try to configure 7R200 once again by following the instructions in the previous steps of the QIG.
    What can I do if I forgot my password?
    Appendix: Troubleshooting
    Not connected
    Connections are available
    Wi-Fi
    7inova-535060
    7inova-535050
    ConnectConnect automatically
    7inova-521635
    Open Network and Sharing Center
    Connect to a Network
    Type the network security key
    Security Key:
    Hide characters
    CancelO K
    Select the wireless
    network name
    configured in step 2,
    click “Connect” button.
    1
    If you encrypted wireless
    network in step 2, the
    following message will
    be displayed on web
    browser, fill in password,
    click “OK”
    2
    Reconnect to Router
    4
    3G Mode
    Wire Mode
    Open a web browser, type 192.168.100.1, and press Enter,
    type the password (default is admin). Click “login”.
    1
    According to the choice of mode for wireless parameters Settings.
    2
    3
    Router Configurations
    Connect to 192.168.100.1
    3GRouter
    User name:
    Password:
    Remember my password
    CancelLogin
    Not connected
    Connections are available
    Wi-Fi
    7inova-535060
    7inova-535050
    Connect automatically
    7inova-521635
    Open Network and Sharing Center
    Information sent over this network might
    be visible to others.
    Connect
    Package Contents:
    Before you start to use this device, please check if there’s anything
    missing in the package, and contact your dealer of purchase to claim
    for missing items:
    Modem
    Wireless Devices
    Wireless Devices
    AP
    Wireless Devices
    3G Lan Card
    3G
    3 Application Modes Introduction
    3G Mode
    Plug 3G modem into the router’s USB port,
    configure accordingly, computer / WI-FI phone /
    Tablet can connect the router wired / wireless
    and share 3G internet. Under 3G Mode, the
    Ethernet port is used as LAN port.
    1
    Wire Mode
    Under Router Mode, the Ethernet port is used
    as WAN port. Connect 7R200 with ADSL
    Modem port using RJ45 cable. Computer/WI-FI
    phone/Tablet can connect the router wirelessly
    and share internet.
    2
    Wireless Client Mode
    Under WISP+Bridge Mode, the router can connect
    Wireless hotspot or wireless router, make wired
    device wireless ready, and bridge wireless signal,
    extend wireless signal range, Create a new SSID.
    The Ethernet port is used as LAN port. To avoid
    same IP address as front-end router, users need to
    set different IP address.
    3
    File sharing
    Download and install FTP client applications from respective app stores to phones or tablets. Thus it
    could make use of file sharing function. Popular FTP client software includes: AndFTP, elfin FTP, ES
    File Brower, etc.
    1
    When sharing files through FTP client software in phones or tablets, simple settings are necessary
    for the first time. In the FTP client software, server settings are: 192.168.100.1. Account and
    password are both:”admin”. Enter into media/sda directory to enjoy sharing the files from USB flash
    disk or mobile HDD.
    2
    Built-in with multimedia server, the product supports DLNA sharing technology, identify automatically
    and play media files like videos, music, pictures stored in the wirelessly connected USB flash disk or
    mobile HDD. Supported file formats include
    ● Support tens of video formats such as MKVavimp4mov3gpmpegm4v;
    ● Support audio formats like LPCMAACAC-3ATRAC 3plusMP3WMA9
    ● Support picture formats like JPEGPNGGIFTIFF.
    1
    Terminals with player supporting DLNA installed can share multimedia playing through the device.
    For instance: smart devices could stream the media files stored in USB flash disk connected to the
    product to TV screen with HDMI port with the help of fleetlink stick in the market.
    2
    Search out the device(by its identifier) as multimedia server in the client player and make it without
    any settings. Please refer to detailed instructions on specific software operation.
    3
    Popular APP software on the following platform
    Apple platformiPhone iPadiTouch:
    Download the players supporting DLNA from App Store such asAirPlayer, GoodPlayer, AirMusic,
    flex:player, yxplayer.
    Android platform (phones and tablets based on android system):
    Download the players supporting DLNA from App Store. For example, SoftMedia,VPlayer Tencent
    video,kascend music,PowerDVD.
    4
    Reset: If need to reset the router, press and hold WPS/RESET button for 8-10 seconds, all indicators
    will be on, release until all other LED are off except Power LED.
    Cautions:
    1. Disconnect the device in thunderstorms in case of lightning damage.
    2. Keep far from heat source and ensure ventilation.
    3. Keep waterproof in the storage, transportation and operating environment.
    LED indicators’ Status Description:
    For 3G USB Modem
    Reset
    Ethernet
    USB Dongle
    Lamp
    Device Connection
    3G USB dongle
    To use 3G Mode, plug 3G modem into
    USB port of 7R200.
    1)
    To use Wireless Client Mode, connect 7R200
    and device (Such as desktop computers) via
    RJ45 cable as following show.
    3)
    To use Wire Mode, plug one side of RJ45
    cable into 7R200’s Ethernet port, plug the
    other side into Modem’s LAN port.
    2)
    (3G Mode is Default mode. For wireless encryption or change to Wireless Router / AP
    / WISP + Bridge Mode, please login and setup on web browser with followed steps)
    Indicator Name
    Power Status Indicator
    Ethernet Status Indicator
    Wireless Status Indicator
    Red On Get Powered
    Green On Ethernet Connected
    Green slow blink
    Green fast blink
    Wireless Function Launched
    Data Transmission via wireless
    Green fast blink Data Transmission via Ethernet
    Status Description
    1x 7R200 3G Wireless Travel Reader
    1x 1m Ethernet cable with RJ45 connector
    1x Quick Installation Guide
    3G Wireless Travel Reader 150M
    Quick Installation Guide
    Model: 7R200
    Ethernet
    ADSL Modem
    Telephone
    line
    Ethernet
    Wireless Client Mode
    WAN Mode Select
    3G Mode
    Wire Mode
    Wireless Client Mode
    Wireless client mode
    SSID:
    MAC:
    Channel:
    Safe mode:
    1
    Disable
    WAN Mode Select
    3G Mode
    Wire Mode
    Wireless Client Mode
    Static IP
    WAN Connection Mode:
    WAN Mode Select
    3G Mode
    Wire Mode
    Wireless Client Mode
    PPPoE
    PPPoE modethat is ADSL dial-up networking modeInput the
    ADSL account and password ISP provides, click “OK”.
    STATIC
    Static IP networking modeit is appropriate when front-end
    router or ISP device uses assigned IP address.
    DHCP
    Dynamic IP address distribution modespecific IP addresses
    are allocated automatically and dynamically between devices.
    It’s the initial default networking mode. Insert a 3G wireless
    modem (dongle) into the USB port of the device, if the blue LED
    is always on, it means a successful 3G network connection. Then
    other devices connected with this WiFi can share the 3G network
    connection.
    Note: if the blue light blinks slowly, it implies the plugged 3G
    modem is not supported, firmware of this device may need to be
    updated.
    The devices support about 150 different 3G adapters; contact
    your supplier if your model is not supported.
    Select “Wireless client mode” in the above figure. And then click
    “start scanning”, and it should display nearby APs. Select
    preferred AP (by SSID), type its security mode and password if
    needed. Click“Apply”.
    Connection Settings
    Operator
    WAN Select
    Dial Number
    APN
    User Name
    Password
    pin code
    Auth Type
    Operation Mode
    Redial Period
    Idle Time
    5 seconds
    600 seconds
    Keep Alive
    Auto APN Info
    Auto
    Auto
7inova 7R200

Need help?

Number of questions: 0

Do you have a question about the 7inova 7R200 or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other 7inova 7R200 owners to properly answer your question.

View the manual for the 7inova 7R200 here, for free. This manual comes under the category Routers 3g and has been rated by 1 people with an average of a 8.9. This manual is available in the following languages: English. Do you have a question about the 7inova 7R200 or do you need help? Ask your question here

7inova 7R200 specifications

General
Brand 7inova
Model 7R200
Product Router 3g
Language English
Filetype PDF

Frequently Asked Questions

Below, you will find the most frequently asked questions about the 7inova 7R200.

Is your question not listed? Ask your question here

ManualSearcher.com

Looking for a manual? ManualSearcher.com ensures that you will find the manual you are looking for in no time. Our database contains more than 1 million PDF manuals from more than 10,000 brands. Every day we add the latest manuals so that you will always find the product you are looking for. It's very simple: just type the brand name and the type of product in the search bar and you can instantly view the manual of your choice online for free.

ManualSearcher.com

© Copyright 2020 ManualSearcher.com. All Rights Reserved.

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

Read more